1. Sector : Non Classified
Knives For Vulcanization
|
Value :
RSD 57.81 Cr
*
|
RSD 578.13 Mn
*
|
Due Date :
4 Days to go
|
12/06/2024
|
TID :72062546
Serbia
|
|
|
|
3. Sector : Non Classified
Knife, Hammer .
|
Value :
KZT 1.26 Lac
*
|
KZT 1.26 Lac
*
|
Due Date :
5 Days to go
|
13/06/2024
|
TID :72597599
Kazakhstan
|
|
|
4. Sector : Education And Research Institute
Supply of Dettol Soap Dettol Original Germ Protection Soap Bar, Good Knight Gold Flash Machine Plus 1 Refill Liquid Mosquito Vaporiser Good Knight Gold Flash Repellent Combo - Machine Plus Refills Liquid Mosquito Vaporiser 1 Unit 3 Refill, Bath Stool Ratan Square Small Size Peach Stool for Bathroom Sitting Bathroom Stool Pink Pre- Assembled, Dove Shampoo Dove Daily Shine Shampoo 5ml Pack of 96, Tea Bag 1 Box 10 Nos, Refined Sugar Sachets Navy Sugar Sachets 200 Pc Sugar 1 Kg Pack of 200, Coffee Nescafe Classic 100percent Pure Instant Coffee 2x50 G Multipack, Nutrovally Lemon Honey Green for Weight Loss with Premium Green Leaves Honey Lemon Green Tea Bags Box 4 X 25 Bags, Milk Powder Nestle Everyday Milk Sachets 150 Psc 450 G Milk Substitutes Powder 450 G, Marhaba Naphthalene Balls 200 G, La Forte 3 Pc Stainless Steel Knife Set Lafpks 003, Odonil Multi Fragrance Blocks 4 X 48 G, Electric Kettle Mstainless Steel Silver 1 5 Litres 1500 Watts - Consumables Qty 2426
|
Value :
0
*
|
Refer Document
*
|
Due Date :
11 Days to go
|
19/06/2024
|
TID :72321865
Maharashtra
|
|
|
5. Sector : House / Building
Supply of Machinery Spares "c.s. Trash Plate Machined Confirming to Is-1030 Grade 23/45. Free From Blow Holes .as Per Drg., ", "grooving as Per Drg., (rate Should Be Quoted Lum Sum), ( Mill No. 1 )", "drilling as Per Drg., (rate Should Be Quoted Lum Sum), ( Mill No. 1 )", "grooving as Per Drg. No (mill No. 2 ), (rate Should Be Quoted Lum Sum)", "drilling as Per Drg. (mill No. 2 ), (rate Should Be Quoted Lum Sum)", "grooving as Per Drg. (mill No. 3&4), (rate Should Be Quoted Lum Sum)", "drilling as Per Drg.(mill No. 3&4), (rate Should Be Quoted Lum Sum)", "c.s. Coupling’s Per Drg. Bcsm/mh/08/02, (rate Should Be Quoted Lum Sum) (mill No. 3&4)", C.s. Scraper with Machining as Per Drawing 1020-mh-0402-01-256-r1 ( Mill No. 1 ), "grooving of Top Scraper as Per Drg ( Mill No. 1 ), (rate Should Be Quoted Lum Sum)", "grooving of Discharge Scraper as Per Drg. ( Mill No. 1 ), (rate Should Be Quoted Lum Sum)", "drilling as Per Drg.( Mill No. 1 ), (rate Should Be Quoted Lum Sum)", M.s. Scraper with Machining as Per Drawing Mh-ts-02-r1 (mill No. 2 ), "grooving of Top Scraper as Per Drg. (mill No. 2), (rate Should Be Quoted Lum Sum)", "drilling as Per Drg. (mill No. 2) , (rate Should Be Quoted Lum Sum)", "m.s. Scraper with Machining as Per Drawing Mh-ds-02-r1, (rate Should Be Quoted Lum Sum) (mill No. 2) ", "grooving of Discharge Scraper as Per Drg., (rate Should Be Quoted Lum Sum) ( Mill No. 2) ", "drilling as Per Drg. (mill No. 2) , (rate Should Be Quoted Lum Sum)", "m.s. Scraper with Machining as Per Drawing, (mill No. 3& 4)", "drilling as Per Drg. (mill No. 3& 4), (rate Should Be Quoted Lum Sum)", "grooving of Top Scraper as Per Drg. , (mill No. 3& 4), (rate Should Be Quoted Lum Sum)", "m.s. Scraper with Machining as Per Drawing, (rate Should Be Quoted Lum Sum) (mill No. 3& 4)", "grooving of Discharge Scraper as Per Drg., (rate Should Be Quoted Lum Sum) (mill No. 3& 4)", "drilling as Per Drg. (mill No. 3& 4), (rate Should Be Quoted Lum Sum)", Mill No. 2 & 3, "m.s. Scraper with Machining as Per Drawing, (pressure Shoot) (mill No. 2 & 3)", "grooving of Top Scraper as Per Drg., (rate Should Be Quoted Lum Sum) (mill No. 2 & 3)", "grooving of Bottom Scraper as Per Drg., (rate Should Be Quoted Lum Sum) (mill No. 2 & 3)", "drilling as Per Drg. (mill No. 2 & 3), (rate Should Be Quoted Lum Sum)", M.s. Scraper with Machining as Per Drawing( Pressure Shoot) (mill No. 4), "grooving of Top Scraper as Per Drg., (rate Should Be Quoted Lum Sum) (mill No. 4)", "grooving of Bottom Scraper as Per Drg., (rate Should Be Quoted Lum Sum) (mill No. 4)", "drilling as Per Drg. (mill No. 4), (rate Should Be Quoted Lum Sum)", "c.s Crown Pinion Confirming to Is-1030 Grade 23/45 Free From Blow Holes and Proof Machine as Per Drg. for Mill No.1, (rate Should Be Quoted Lum Sum)", "c.s Crown Pinion Confirming to Is-1030 Grade 23/45 Free From Blow Holes and Proof Machine as Per Drg. for Mill No.2, 3&4 , (rate Should Be Quoted Lum Sum)", "cane Unloader Bridge Wheel as Per Drg. , (rate Should Be Quoted Lum Sum)", "cane Unloader Trolly Wheel as Per Drg., (rate Should Be Quoted Lum Sum)", Static Collar Mill Roller 36 X 72 as Per Drawing , Static Collar Mill Roller 33 X 66 as Per Drawing , Cs Trash Beam as Per Drawing , Cane Cutting Knives, "cane Cutting Knives Made From Shock Resistance Ms Plate 25 Mm Thick Confirming to Is-2062. and Tested at Hardness-500 Bhn Tensile-65 Kg/mm, Yield Strength-50 Kgf/mm Elongation-20 % Min with Proper Heat Treatment to Avoid Breaking the Knives. as Per Drawing No. 1020-mh-0303-1700-105, Without Hard Facing, with Hard Facing, ", "cane Cutting Knives Made From Shock Resistance Ms Plate 25 Mm Thick Confirming to Is-2062. and Tested at Hardness-500 Bhn Tensile-65 Kg/mm, Yield Strength-50 Kgf/mm Elongation-20 % Min, with Proper Heat Treatment to Avoid Breaking the Knives. , as Per Drawing No. 1020-mh-0303-1-105, Without Hard Facing, with Hard Facing, ", Fibrizer Hammer & Spares, "fibrizer Hammer , Make -imco, as Per Drg No. 1030-310-1700-112, ", "fibrizer Hammer Domite Tip, Make Zuper/polyshield/hyster, as Per Drg No. 1030-310-1700-112, Note- Party Should Recommend How Much Cane Will Be Crushed By Using Both Sides of Domite Tips., ", "ss 304 Grade Shaft for Swing Type Hammer , Make Imco , ", Mill House Lubricator , "mill House Lubricator Servicing and Spare , Cenlub System Sr.0860222, Model 70100075",
|
Value :
0
*
|
Refer Document
*
|
Due Date :
5 Days to go
|
13/06/2024
|
TID :72347417
Punjab
|
|
|
|
|
8. Sector : Corporations/ Assoc/ Chambers/ Govt Agencies
Purchase of cane cutting knives.
|
Value :
0
*
|
Refer Document
*
|
Due Date :
3 Days to go
|
11/06/2024
|
TID :72515174
Haryana
|
|
|
|