|
|
|
2. Sector : Minerals
Deployment of 08 Nos. Un-skilled Labour for Cleaning of W.c. Pan, Wash Basin, Urinal (2 Times), Cleaniang of Floor for Entire Hospital Building, Wards, Canteen, Rural Medical, O.p.d. Emergency Room and Any Other Entire Floor Area Etc. with Floor Washing Powder Including Cleaning Patient Pans, Spilt on, Night Soil, Death Dogs, Rats, Cats Etc. Buried in the Soil, Remove Spider Net on the Wall Or Ceiling, Cleaning of Toilets, Dustins 02 Times Daily, Cleaning of Furniture, Tables, Chairs, Window Sill Or Glass with Cleaning Agent, Cleaning of Drains, Sewer Lines Jam, Morgue Room, Washing of Ambulance, Lifting of Dead Body From Gara Nala as and When Required By Local Police, Jungle Cutting Surrounding Building with 5 Mtrs Distance Including Cost of Sweeper Or Labour, Tools and Tackles Etc. Complete as Per Direction of Eic , Deployment of Sanitary Supervisor for Supervision of the Above Work. , Phenoil, Harpic, Bleaching Powder, Floor Washing Powder, Naphthalene Ball, Hard Broom, Soft Broom, Patson Or Sutli Or Mopping, Carbolic Acid (450 Ml Per Bottle), Colin (450 Ml Per Bottle), Water Dozer, Oxalic Acid, Toilet Brush, Broom Sticks, Rubber Vaccum Cleaner, Navy Blue Shirt & Trowser, White Sari with Navy Blue Border, Qty 8628
|
Value :
INR 45.71 Lac
*
|
INR 4.57 Mn
*
|
Due Date :
4 Days to go
|
24/04/2024
|
|
TID :70984237
Jharkhand
|
|
|
|
|
|
|
|
|
|
|
|
7. Sector : Health Services/Equipments
Supply of Group Tender for Various Medical Equipment (g 8-bio Chemistry) (q3) the Glassware Should Be Made of High Quality Borosilicate Glass to Withstand High Heat., 2 Apparatus Capacity Should Be of 4 Litres/hr., 3 Should Be Double Stage., 4 Should Have Metallic Stand and Other Accessories., 5 Stand Should Be Made of Rust Free Material., 6 Standards Heating Elements of 2.5-3kw to Be Used., 7 An Automatic Cut Off Device Should Be Attached., 8 Heather Should Be of Quartz for Immediate Output of Distilled Water. Apparatus Should Consist of High, Quality Borosilicate Boiler with Built in Water Leveller., 9 Output Water Should Be Pyrogen-free with Conductivity Less Than 1 Micro Siemen, Ph 6.9-7, Distillate, Temp 65-75 Deg C., 10 Metal Stand., 11 Automatic Cut Off Device Or Safety Control Module., 12 Power Input to Be 220-240 Vac, 50 Hz., 13 Manufacturer Should Be Iso 13485 Certified, Item No. 2, Analytical Balance, I Description of Function, 1 Electronic Balance is Required for Precision Weighing of Lab Samples, Ii Technical Specifications, 1 Weigh Accurately Up to 3rd Decimal Place, 2, Fully Automatic Time and Temperature Controlled Internal Calibration and Balance Should Be, Capable to Adjust Itself, 3 Auto Zero Setting, 4 Weighing Capacity Up to 200g, 5 Readability 0.001g, 6 Repeatability 1mg Or Less, 7 Setting Time - Less Than 2 Seconds, 8 Suitable for Internal/external Adjustment Weights, 9 Pc Connectivity, Iii Balance Should Have, 1 Liquid Crystal Display (lcd) for Display, 2 Ir Sensors for Hands Free Operation, 3 Warns If Balance is Not Correctly Levelled, 4 Automatic/manual and Detachable Draft Shield, 5 Detachable and Adjustable Terminal, 6 Facility for User Administration and Password Protection, 7 Integrated Automatic Safety Function for External Routine Operations, 8 Alphanumeric Data Entry of More Than 2 Ids, 9 Should Be Bis/ Iso Certified and Certificate to Be Provided., Iv Power Supply, 1 Power Input to Be 220-240vac, 50hz, 2 Deleted, 3, Suitable Ups with Maintenance Free Batteries for Minimum One-hour Back-up Should Be, Supplied with the System, 4 Resettable Over Current Breaker Shall Be Fitted for Protection, Item No. 3, Vertical Autoclave, 1 the Vertical Autoclave Should Have Chamber Capacity Of Effective Volume 113 Litres Or More., 2, the Chamber of Vertical Autoclave Should Be Manufactured as Per Asme Standards and, Comply with Pressure Equipment Directive, 3, the Vertical Autoclave Should Work on the Domestic Power Supply of 230 V Ac, 50 Hz, Single, Phase, 4, the Vertical Autocalve's Internal Chamber, Cover Lid and All Wetted Parts Should Be Fabricated, From Stainless Steel of 304 Grade, 5 the Vertical Autoclave Outer Body Should Be of Ss 304., 6 Temperature Range Should Be Up to 135°c and Pressure Up to 30 Psi., 7 the Vertical Autoclave?s All Joints Should Be Smooth Finished for Crevice Free Internals., 8, the Chamber Should Be Hydro Statically Tested at 1.5 Times of Its Working Pressure and, Certificate Should Be Supplied for the Same, 9, the Lid Should Be Equipped with Single Lever Lock Mechanism and Lever Handle Moulded From, Industrial Plastic, 10 the Lid Should Be Provided with Auto Purge Cum Vacuum Breaker Valve and a Manually, Operable Valve for Exhaust., 11 the Unit Should Have a Solenoid Valve for Auto Purging of Air & Normal Exhaust, 12 the Vertical Autoclave Should Have Stainless Steel Pressure Gauge with Dual Range Dial Display, in Kpa and Psi Along with a Co-related Temperature Scale for Steam in Degrees Celsius, 13 the Operations of the Unit Should Be Controlled By Touch Screen Programmable Logic, Controller with 4 Temperature Channels & 1 Pressure Channel Inbuilt., 14 the Autoclave Should Be Equipped with Touch Screen Hmi Plc., 15 Controlling of Chamber Temperature Should Be on All 4 Temperature Channels, 16, to Ensure Proper Sterilization Cycle Autoclave Should Have Facility of Connecting External, Printer Which Can Give Instant Print of All Cycle Data – Customer and Operator Name , Equipment, Number, Recipe, Hold Time, Batch Number, Date & Time, Temperature Set-point, Readings of at, Least Four Temperature Sensors, Pressure Channels F0 Summation and Cycle Status., 17 Inbuilt 6 Recipes for Different Load Should Be Available., 18 Provision of Automatic Water Filling Should Be Available., 19 the Timer Should Be Retentive & Settable Up to 95 Mins, 20, Power Fail Restoration Facility in Case of Power Failure, the Autoclave Should Give Option of, Resuming Cycle with Automatic Adjustment of Sterilization Hold Time, 21 the Unit Should Have Safety Valve to Protect the Equipment in Case of Over Pressurization, 22 the Lid Should Be Equipped with Pressure Interlock Device to Avoid Opening Under Pressure., 23 Lid Should Be Equipped with Door Switch to Avoid Cycle Start If Door is Not Locked Properly., 24 to Ensure Effective Sterilization, If Temperature Falls Below Temperature Set Point the, Sterilization Timer Should Get Automatically Adjusted., 25 the Unit Should Be Provided wit...
|
Value :
0
*
|
Refer Document
*
|
Due Date :
10 Days to go
|
30/04/2024
|
|
TID :70042369
Uttar Pradesh
|
|
|
|
8. Sector : Health Services/Equipments
Supply of Group Tender for Various Medical Equipment (g 6- Physiology, Anatomy Community Medicine) (q3) Von Freyaesthesiometer, 1 Should Microprocessor Controlled, 2 Should Have Computer Connectivity for Data Logging., 3 Should Work on the Temperature Range of 5 Deg C to 55 Deg C, 4 Should Have Sampling Rate of 18 Samples/sec Or More, 5 Should Have a Starting Temperature 25° C to 40° C, 6 Temperature Increment Rate 0.2 Deg/s to 2.5 Deg/s, 7 Temperature Decrement Rate 0.2 Deg/s to 2.5 Deg/s, 8 Delay Between the Repeats Should Be 3 to 30 Secs, 9 Power Supply – 220v 50hz, 10 Manufacturer Should Be Iso 13485 Certified, Item No. 02, Anthropometric Set – Digital, 1 Digital Weight Scale with Weights for Scale Calibration, Set of Fifteen 10kg Calibration Weights., 2 Electronic Stadiometer with Calibration Rods., 3 Electronic Infantometer., 4 Skinfold Caliper., 5 Step Wedge Standards., 6 Measurement Box for Upper Leg Length and Calf Circumference., 7 Portable Weight Scales (2 Nos), 8 Steel Measuring Tape, 9 Insertion Tape, 10 Computer Terminal, 11, Computer Specifications 19” Monitor, 4gb Ram, 500gb Hd, Latest Windows Operating System with, Printer., 12 Standards, Safety and Training, a Should Have Iso Certification., 13 Documentation, a, Two Numbers of Complete User/technical Maintenance Manuals to Be Supplied in English (soft Copy, and Hard Copy)., Accessories, I Cosmetic Pencils (wax Base), Ii Baby Oil, Item No. 03, Electronic Muscle Stimulator, 1 Should Do Elicitation of Muscle Contraction Using Electric Impulses, 2 Should Be Solid State Microprocessor Controlled Unit with Digital Timer and Intensity Display, 3 Microprocessor Controlled Pulse Duration 0.3, 1, 10, 30, 100, 300ms, 4 Pulse Repetitive Frequency 0.3, 1, 3 Seconds, 5 Intensity Variation 0 to 130volts, 6 Output Voltage 100 Acv to 260 Acv, 7 Protection Class - I Complies with Iec 601-1, 8 Accessories - Electrode Set, 9 Power Supply – 220 to 240 Vac, 50hz, 10 the Stimulator Should Be Compatible with 3 Channel Digital Physiograph., Item No. 04, Priestly Smith Perimeter, 1 Should Have a Calibrated Arc, Revolving Chart Holder., 2, Should Be Able to Rotate in Any Direction and Fix at Any Position with a Tightening Screw. the Arc, Should Be Graduated From 0° to 90° with a Movable Test Object., 3, at the Back of the Arc Arrangement Should Be Provided for Fixing of Chart Which Has Concentric Circles, Corresponding to the Degrees of Arc., 4 Adjustable Chin Rest with Leveling Rod., 5 the Above Mentioned Should Be Fitted Over a Sturdy Base with Receptacle for Keeping Charts., 6 Accessories, A), Different Sized (2mm, 5mm, 10mm), Shaped (round & Square) and Colored (white, Blue, Green, Red, , Yellow) Objects., B) Should Be Supplied with 20 Packets of Charts (100 Charts/packet)., Item No. 05, Apparatus for Passive Movement, 1 Cpm is Used to Treat Joints of the Lower Limb After An Injury, Disease Or Following Surgery., 2, Based on a Concept Originated By Salter in 1970, This Device Has Varied Applications Namely, Treatment of Intra Articular Fractures, Septic Arthritis, Ligaments Tendon Healing and Also Following Total, Joint Replacement to Ensure a Sufficient Range of Motion., 3 to Prevent Stiffening , the Jouint Have to Be Moved Continuously Which Results in the Following., 4 Minimize Swelling and Pain After Operation, 5 Ensures Faster Recovery and Shortened Hospital Stay, 6 Prevents Extra Articular Contractures and Adhesions., 7 Ext/flex Angle Indicator at Knee Position, 8 Compact and Elegant Construction, 9 Electronic Controls Enable All Adjustment of Angle to Be Made on the Front Panel., 10 Smooth and Silent Movement, 11 Digital Timer with Alarm, 12 Patient Safety Switch for Stopping and Reversing the Motion., 13 Specifications, 14 Treatment Time 0 – 99 Minutes, 15 Reset Time 1 to 5 Seconds, 16 Angle Extension 0, 17 Power 230v/ac/50hz, 75va, Item No. 06, Physiograph Single Channel, 1, Student Physiograph Should Be Single Channel Console with 9 Speed (0.5, 1, 2, 5, 10, 20, 25, 30 & 50, Mm/sec) Tft/lcd Display, Time & Event Markers and Appropriate Transducers and Inbuilt Stimulator., 2 Couplers Strains Gauge and Isotonic, 3, Transducers Volume, (eeg/eog/emg Disc Electrodes, Gsr Transducers, Ecg Electrodes, , Respiration Belts, Temperature Electrodes for Human Physiology), 4 Accessories, Spares and Consumables, I Earth Lead, Ii Fuse, Iii Cover, Iv Power Supply Power Input to Be 220-240 Vac , 50 Hz, 5 It Should Be Stand Alone System., Item No. 07, Transilluminator with Uv Stand and Uv Torch, 1 for Visualization of Ethidium Bromide Stained Nucleic Acids., 2 High Output Uv Tube with Average Life Expectancy of 5000 Hrs., 3 Uv Light Facility with Wavelength Range 254-365 Nm., 4 Uv Protective Shield Which Can Block 99.5% of Uv Radiation, 5 Should Be Able to Detect Dna Less Than 10 Nanogarm., 6 Filter Size Approximately 20 X 20 Cm., 7 Can Be Used in Routine Electrical Point (220-230v)x 50hz., 8 with Spare Bulbs., 9 Uv Face Shield, 10 Uv Torch, 11 Manufacturer Sho...
|
Value :
0
*
|
Refer Document
*
|
Due Date :
2 Days to go
|
22/04/2024
|
|
TID :70081521
Andhra Pradesh
|
|
|