1. Sector : Non Classified
Dynamometer
|
Value :
KRW 39.90 Cr
*
|
KRW 399.09 Mn
*
|
Due Date :
6 Days to go
|
03/04/2024
|
TID :70650411
Korea
|
|
|
2. Sector : Other Services
Supply of Goods, Tools & Equipment, Alternator assembly used for LMV working condition, Starter motor assembly used for LMV working condition, Electronic engine control module, Fuel pump for MPFI working condition demonstration kit, Inline fuel injection pump and rotor type fuel injection pump, Demonstration board of 2-Wheeler Ignition system., Demonstration board of electronic Ignition system., Working Condition of Petrol MPFI Engine Assembly, MPFI petrol engine with swivelling stand along with special tools, Demonstration board of MPFI system, Ultrasonic Injection cleaning equipment, Working Model of power windows, Petrol Engine Motorcycle/Scooter along with special tools, Four stroke multi cylinder diesel engine in working condition, Four strokes four-cylinder CRDI diesel engine in working condition, Functional/experiment model of different type of sensors., Auto Electrical test bench, Cut section Model of Mock layout of a motor car-electrical system, Cut section working model of Single plate clutch assembly, Cut section working model of centrifugal clutch assembly., Front axle (Rezeppa Joint) with stand for Dismantling and assembly, Rear axle with stand for Dismantling and assembly, Cut section model of synchronous gear box working, Cut section model of sliding mesh gear box working, Cut section model of constant mesh gear box working, Full floating axle and semi- floating axle assembly, Cut section working model of automatic transmission Gear box, Steering assembly- Rack & pinion, Worm & roller Recirculating ball Power steering, Wheel alignment set up instrument-computerized, Brake testing equipment, Motor vehicle in running condition (Diesel heavy) with hydraulic power steering, Light Motor Vehicle Diesel CRDI with electronic power steering and car a/c, Engine Dynamometer, Four stroke multi cylinder engine MPFI petrol with CNG kit set, Four Cylinder Four Stroke Diesel Engine Test Rig with Rope Brake Dynamometer, Exhaust Gas Analyzer - Diesel, Training Setup for ADAS Systems, 4-Wheel Alignment Set & Hoist with Advanced Driver Assistance Systems (ADAS), Steel toolbox with lock and key (folding type), Workbench with Vice (6 Inch) and Drawers, Car Jet washer, Battery analyser with Printer, Carburettor- Solex, Mikuny for dismantling and assembling, Starter motor axial type, pre-engagement type & Co-axial type, Distributor -Duel advance type, reluctance type, Fuel feed pump, Petrol Nozzle, Piston ring compressor, Piston ring expander, Valve spring compressor, Valve seat cutter complete set with guide and pilot bar, Timing light, Battery, Electrical horn (different types ), AC alternator slipring puller, Executive Auto Electrical toolkit, Turbo charger, variable Turbo charger, Timing Light with tachometer, Battery Tester, Working model of wiper along with wind shield, Wiper motor assembly, Car stereo, Spark Plug cleaning and testing equipment, Cut model, Cut model, Mechanical Hoist/Plate Form Type, Multi scan tool /ECU diagnostics kit, Battery charger, Trolley type portable air compressor single cylinder, Grinding machine (general purpose), Portable electric drill Machine, Spring tension tester, Valve refacing refitting machine, Injector testing machine for diesel, Smoke meter for Diesel with camera and printer, Exhaust gas analyser with camera and printer, Connecting rod alignment fixture, Engine lifting crane(jib), Oil draining trolley, Engine crank case, Stretcher trolley for under chassis working, Constant Mesh Gear box with stand for Dismantling and assembly, Sliding mesh Gear box with stand for Dismantling and assembly., Synchronous Gear box with stand for Dismantling and assembly., Pipe Bending Machine (Hydraulic type), Transfer case with stand for Dismantling and assembly., Working model of fluid fly wheel, Working model of torque converter, Cut section models of shock absorbers, Shock absorber testing bench, Tyre changer, Nitrogen Tyre Inflation system, Tube vulcanizing machine, Wheel balancing machine with accessory, Tube tyre of car, trucks& motorcycle, Tube less tyre of car & truck, Cut section of cross ply and radial tyres, Working models of Disk brake with calliper assembly, Drum brake assembly, Tandem master cylinder with booster, Wheel cylinder, Vacuum assisted hydraulics brake assembly, Working model of Air Brake Assembly, Mechanical Hoist/Plate Form Type, LPG conversion kit along with tank fitted on a stand, Car A.C unit working model of car A/C unit with charging unit with Engine, Single cylinder four stroke stationary diesel engine, Brake Bleeding Machine, AC Gas refilling Machine, CRDI service tool kit, A light motor vehicle petrol & LPG driven, Hydraulic press, Alight motor vehicle CNG driven for an International Standard IToT in Mechanic Motor Vehicle (MMV) Trade at ITI Tarsali, Gujarat, India.
|
Value :
INR 13.18 Cr
*
|
INR 131.83 Mn
*
|
Due Date :
5 Days to go
|
02/04/2024
|
TID :70344629
Gujarat
|
|
|
3. Sector : Other Services
Supply of Goods, Machine Tools & Equipment - Auto Electrical Test bench, Starter motor, New Air-conditioned CRDI Vehicle in running condition-LMV, Diesel Engine–CRDI 4stroke (used /nonfunctional/refabricated) engine, Diesel engine (Running condition) Stationary type, Discrete Component Trainer/Basic Electronics Trainer, NEW Heavy Commercial vehicle (without body on frame), NEW Working Condition of Diesel Engine – CRDI, 4stroke, 4 Cylinder, Assly, Cut section of 4- and 6-cylinder diesel engine with moving condition, Fuel injection test bench, Electrical Test bench, NEW Automobile Diesel Engine six Cylinder in running condition, Common Rail Diesel Fuel Injector Testing Bench, Common Rail Pump Test Bench, Cylinder Reboring Machine, Wireless OBD2 Car Code Reader Scan Tool, Vertical Engine Head and engine top Surface Grinding Machine, Crankshaft Grinding Machine, Electric Engine Lifting Crane-1250kg, Hydraulic Engine lifting crane, Electric Valve Grinding Machine, Four Cylinder Four Stroke Diesel Engine Test Rig with Rope Brake Dynamometer, Exhaust Gas Analyzer - Diesel, Turbo charger cut model full Assembly with housing assembly of diesel engine, Radiator full cut model Assembly with housing & fan assembly of diesel engine, Air conditioner full cut model Assembly with housing & ac condenser, Hydraulic Power steering full cut model Assembly with housing attachment, Engine wire harness connected complete with electrical equipment, Diesel Fuel Quality Test Equipment set, Training Setup for ADAS Systems, 4-wheel Alignment Set & Hoist with Advanced Driver Assistance Systems, ADAS), Training System for Sensors in motor vehicles, Training System for the basics of Pulse generation and ignition in vehicles, Training System Common rail diesel injection system, Battery–charger, Car Jet washer with standard accessories, Chain Pulley Block capacity with tripod stand, Compression testing gauge suitable for diesel Engine with standard accessories, Connecting rod alignment fixture, Cylinder liner-Dry& wet liner, press fit & slide fit liner, Different type of Engine Bearing model, Different type of piston model, Fuel feed pump for Diesel, Fuel injection pump(Diesel)inline, Fuel injection pump dismantling toolkit /Universal Vice, Fuel injection pump VE pump/ Distributor fuel rotary pump(DPC) pumps, Glow plug tester, Injector–Multi hole type, Pintle type, Injector cleaning unit, Injector testing set (Hand tester), Oil pump for dismantling and assembling., Piston ring compressor, Piston Ring expander and remover, Piston Ring groove cleaner., Radiator cut section-crossflow, Radiator cut section-down flow, Radiator pressure cap, Tandem master cylinder with booster, Turbo charger cut sectional view, Water pump ford is mantling and assembling, Workbench with Bench Vice and Storing Drawers, Arbor Press Hand Operated 2-ton capacity, Drilling machine bench to drill, Dual Magnetization Yoke, Grinding machine pedestal (general purpose), Hydraulic Jack, Pipe Bending Machine (Hydraulic type), Pneumatic rivet gun with standard accessories, Tin smiths bench folder, Trolley type portable air compressor, Special tools and equipment, Hydraulic Vertical Honing machine for Engine Cylinder and Brake Bore, Pneumatic Valve Seat Grinder and Lapping kit, Intercooler cut model Assembly with air filter & housing assembly diesel engine, work benches with bench vices and storage draws to demonstrate machines, Belt Tensioner gauge, Granite surface plate with stand and cover, Marking out table, Multi Scan Tool, Spring tension tester, Ammeter DC with external shunt, Cylinder bore gauge, DC Ohmmeter, Depth Micrometer, Dial gauge, Multimeter digital, Oscilloscope, Outside Micrometer, Sheet Metal Gauge, Straight edge gauge, Surface gauge with dial test indicator plunger type, Tachometer (Counting type), Telescope gauge, Temperature gauge with sensor, Thermostat, Timing lighter, Tyre pressure gauge with holding nipple, Vacuum gauge, Vernier calliper, Wire Gauge(metric), Hydrometer, Engineers stethoscope, Drill twist(various sizes), Hand reamers adjustable, Drill Twist(assorted), Set of stock and dies with die stock-Metric, Taps and Dies complete sets(5types), Steel rule, Caliper inside with Spring, Caliper outside with spring, Dividers with Spring, Engineer’s square, Feeler gauge 20blades (metric), Hand Shear Universal, Bench lever shears, Air blow gun with standard accessories, Air ratchet with standard accessories, Air impact wrench with standard accessories, Angle plate adjustable, Angle plate, Anvil with Stand, Blow Lamp, Lifting jack screw, Magneto spanner set with 8spanners, Soldering Copper, Solid Parallels in pairs (Different size) in Metric, V’ Block 75 x38 mm pair with Clamps, Electric Soldering Iron, Portable electric drill Machine, Punch Letter 4mm(Number), Right cut snips, Rivet sets snap and Dolly combined, Tinman’s Shear, Tinman’s Shear, Stud extractor Set, Stud remover with socket handle, Torque Wrenches, Trammel, Universal puller for removing pul...
|
Value :
INR 10.88 Cr
*
|
INR 108.88 Mn
*
|
Due Date :
5 Days to go
|
02/04/2024
|
TID :70342686
Gujarat
|
|
|
|
5. Sector : Health Services/Equipments
Supply of Group Tender for Various Medical Equipment (g 1- Bio Chemistry) (q3) Agarose Gel Electrophoresis System (horizontal), 1 Gel Electrophoresis System (horizontal) with Power Pack, 2 Horizontal Agarose Gel Electrophoresis Apparatus, 3 Buffer Tank (midi Unit) with Platinum Electrodes, 4 Capacity to Fix Gel with at Least 10 Samples, 5 Gel Casting Tray Standard Form; Combs Sizes 1.0 Mm -10 Wells, 12 Wells, 16 Wells, 24 Wells 2.0 Mm, - 10 Wells, 12 Wells, 16 Wells & 24 Wells, 6 Gel Trays Should Be Uv Transparent, 7 Power Pack – Max, Voltage (300 V), Max Current (500 Ma), Constant Current (available) and Constant, Voltage (available) and at Least Two Outputs, 8 Manufacturer Should Be Iso 13485 Certified, Digital Colorimeters, 1 Fully Automated Digital Photo Diode Based Colorimeter, 2 Colorimeter with 8 Glass Filters Ranging From 400 to 700 Nm, 3 Should Consist of Long Lasting Photo Diode Detector, 4 Should Have Minimum Sample Volume of 1 Ml, 5 Should Have Range of Absorbance 0 to 1.99 and % Transmittance 0 to 100%, 6 Should Have Od Resolution of 0.01, 0.1 % T, 7 Should Have Led Light Source, 8 Should Have Led Display, 9 Should Have Provided with 5 Additional Cuvette and Cuvette Stand/ Case., 10 Should Have Cover with Cuvette Holder., 11 Should Have Dust Protection Cover for the Instrument., 12 Should Have Input 160-260 V and Output 220-240v and 50 Hz, 13 Should Have Provided Battery Backup, 14 Manufacturer Should Be Iso 13485 Certified, Vortex Mixer, 1 Vortex Mixer, Designed with a Heavy Cast Aluminium Body to Provide Optimum Bench-top Stability., 2 the Mixer Has Two Modes of Operation Continuous Operation When You Need to Mix a Quantity of, Tubes in Sequence; Intermittent Operation is Activated By Touching the Cup Attachment with a Test Tube., 3 Equipped with a Single Tube Mixing Cup for Single Tube Mixing and a Soft Foam Pad and Mixing, Platform for Mixing 1-4 Test Tubes Simultaneously., Vortex Mixer, 4 to Be Supplied with a Fractional Workable Motor on 220v Ac Completed with Indicator, Plug & Cord, , Speed 100-3000 Rpm, Dimensions (lxwxh) - 17.7x11.4x15.2 Cms., 5 Manufacturer Should Be Iso 13485 Certified, Densitometer with Computer (gel), 1, Computer Controlled Chemiluminescence Western Blot, Trans-uv for Dna, Rna Gel and Colorimetric, Protein Gel Imaging System with Extensive Analysis Tool for Molecular Weight Calculation, Band, Distance, Colony Counting, Etc., 2 System Must Allow for Future Upgrade for Fluorescence Based Imaging and Multiplexing Application, with the Choice of Uv, Visible (red, Green, Blue), Near Ir, Ir and Deep Ir Spectral Excitation., 3 Scientific Grade Ccd Camera with High Sensitivity and Extremely High Level of Resolution, 4 Camera Should Give 6 Megapixels Or More Image Resolution, 5 Camera Must Be a Cooled Ccd with -50°c Maximum Differential Cooling From the Ambient with -25°c, Absolute and Regulated Cooling By Three Stage Peltier Thermoelectric Cooler., 6 Interface Must Be Usb 3.0 for Faster Image Transfer to Help Image Before Signal Gets Weaker., 7 Should Be a Lab Proof Compact Design, Require Minimal Bench Space, Robust and Chemical Resistant, System Made of Stainless Steel, Aluminum Or Steel, 8 Technology to Visualize Faint Bands Thereby Increased Sensitivity with No Visible Light Background, While Performing Gel Documentation, 9 High Sensitivity Reading Technology for Isolation of the Electronic Components of the Camera During the, Light Capture in Order to Avoid Noise, 10 Should Have Smart Auto Exposure Mode with Optimum Exposure Time Calculation By the Software, Based on the Signal Output From the Sample, 11 Software Should Provide Options for 1x1, 2x2, 3x3, 4x4 Binning., 12 4-position Filter Wheel Allows for Dye Flexibility of Different Fluorescent Stains., 13 Pre-calibrated Focus for All Defined Sample Height. Easy and Convenient Adjustment of Lens Settings, Fluorescent Microscope, 1 Microscope Body Microscope with Infinity Optical Corrected Optical System with Light Path Selector of, 1000, 0100., 2 Eyepiece 10x (paired) with F O V 22mm and Diopter Adjustment Facilities on Both Eyes, Anti-fungus, Type., 3 Condenser Extra Long Working Condenser (suitable for Phase Contrast/bf/fluorescence), 4 Illumination Pre Centred Mercury Fibre Illuminator of 130w/metal Halide Illuminator of 120/130w with, Facility for No Heat Lifetime of 2000 Hrs Or More, 5 Nosepiece Quintuple Nosepiece to Accommodate 5 Objectives at a Time., Fluorescent Microscope, 6 Stage Attachable Mechanical Stage with Universal Holder to Accept All Types of Specimen Holders., 7 Objectives 4x (n.a.0, 10, W.d 30.0mm Or Higher), 10x (n.a 0.25, W.d 5.2 Mm), 20x (n.a, 0.45, W.d, , 8.2-6.9mm), 40x(n.a.0.60, W.d, 3.6-2.8mm), 8, Epi-fluorescence Attachment Noise Terminator Mechanism Incorporated for High Signal Ratio Images, with Pre Centred Mercury Fibre Illuminator of 130w. Main Body Must Hold 4-6 Fluorescence Filter Block, and One Empty Position for Bright Field. Epi-fluor Filter Block (blue) Consisting ...
|
Value :
0
*
|
Refer Document
*
|
Due Date :
1 Day to go
|
29/03/2024
|
TID :70067420
Uttar Pradesh
|
|
|
6. Sector : Power Plant
Supply of Spares of Liebherr Make Lr 11350 Heavy Duty Crawler Crane -signal Lamp (part Number- 10016465), Door Lock (part Number- 10020272), Cable Gland (part Number- 10036628), Counter Nut (part Number- 10036629), Brake Valve (part Number- 10038262), Liebherr Grease-25 Kg Bucket (part Number- 10174262), Split Pin (part Number- 10180368), Washer (part Number- 10197808), Load Holding Valve (part Number- 10218310), Pressure Control Valve (part Number- 10278566), Tank Sensor (part Number- 10290070), Distribution Block (part Number- 10295212), Foot Rocker (part Number- 10297310), Distribution Block (part Number- 10326878), Distribution Block (part Number- 10326879), Electric Pump (part Number- 10327171), Distribution Block (part Number- 10330839), Distribution Block (part Number- 10330841), Ds Support Cylinder (part Number- 10346345), Generator (part Number- 10651021), Starter (part Number- 10651041), Angle Transmitter (part Number- 10802057), Rotary Encoder (part Number- 10802060), Pressure Sensor (part Number- 10816185), Oil Pressure Switch (part Number- 10872568), Hex Nut (part Number- 10875612), Washer (part Number- 10875643), Pan-head Screw (part Number- 10876384), Monitor with Keyboards (part Number- 10885338), Power Supply (part Number- 10885768), Liebherr Transmission Oil-210 L Barrel (part Number- 11000870), Proximity Switch (part Number- 11003193), Lever (part Number- 11007221), Spherical Knob (part Number- 11007223), Adapter Ring (part Number- 11210914), Double Cardan Joint (part Number- 11347002), Inductive Sensor (part Number- 11347206), Tension Dynamometer (part Number- 11485549), Time Relay (part Number- 12075176), Keyboard Unit (part Number- 12101942), Liebherr Special-purp. Grease-50 Kg Bucket (part Number- 12109080), Trip Cam (part Number- 12109546), Adaptor for Repair Kit-96080929 (part Number- 12109715), Pressure for Transmitter Repair Kit-96080929 (part Number- 12109716), Lead (part Number- 96023348), Retaining Cylinder Pre-ass. (part Number- 96048100), Pin (part Number- 452541408), Pressure Relief Valve (part Number- 510438508), Pressure Limiting Valve (part Number- 510468708), Coupling Sleeve (part Number- 510599608), Coupling Plug (part Number- 510599708), O-ring (part Number- 510738608), Directional Control Valve (part Number- 511444408), Pressure Limiting Valve (part Number- 511485208), Pressure Control Valve (part Number- 511485308), Pressure Relief Valve (part Number- 511497508), Coupling Plug (part Number- 511500408), Coupling Sleeve (part Number- 511500508), Coupling Sleeve (part Number- 511500608), Coupling Sleeve (part Number- 511501008), Coupling Plug (part Number- 511501108), Coupling Plug (part Number- 511501308), Coupling Sleeve (part Number- 511501508), Coupling Sleeve (part Number- 511505808), Coupling Sleeve (part Number- 511505908), Coupling Sleeve (part Number- 511508208), Coupling Plug (part Number- 511508608), Coupling Plug (part Number- 511509608), Coupling Sleeve (part Number- 511510708), Coupling Plug (part Number- 511510808), Coupling Sleeve (part Number- 511512208), Coupling Plug (part Number- 511512308), Coupling Sleeve (part Number- 511518408), Coupling Plug (part Number- 511518508), Variable Pump (part Number- 512136408), Protective Motor Switch (part Number- 570338308), Coupling Plug (part Number- 570504808), Pressure Limiting Valve (part Number- 571130108), Snap Switch (part Number- 571486808), Seal Kit (part Number- 571728308), Lead (part Number- 600265101), Latch Clamp (part Number- 602116008), Wired End Ferrule (part Number- 602308008), Flat Plug Housing (part Number- 602323308), Insertion Bridge (part Number- 602735508), End Angle (part Number- 602794608), Flat Fuse Link (part Number- 604107614), Fuse Box Small (part Number- 604501608), Rocker Switch (part Number- 606023508), Rocker Switch (part Number- 606023608), Rocker Switch (part Number- 606025508), Rocker Switch (part Number- 606025808), Rocker Switch (part Number- 606026908), Push Button (part Number- 606143008), Push-button Cap (part Number- 606143108), Rotary Lock (part Number- 606143308), Indicator Lamp (part Number- 606143508), Push-button Cap (part Number- 606143908), Keypad Button (part Number- 606144008), Emergency Stop Button (part Number- 606144108), Push-button Cap (part Number- 606144408), Light Bulb (part Number- 607008708), Control Light (part Number- 607135508), Work Light (part Number- 607144508), Alarm (part Number- 614004708), Cutoff Relay (part Number- 630103608), Electric Pump (part Number- 774356608), Passage Nipple Block (part Number- 774375108), Sealant (part Number- 870002808), Central Unit C1 (part Number- 914400508), E/a-module (part Number- 915350708), Dummy Plug (part Number- 921824308), Custom Circuit Module 1 (part Number- 927158408), Bus Pcb (part Number- 928431108), Roller (part Number- 937898108), Sleeve (part Number- 955600008), Holder (part Number- 962157808), Lead (part Number- 963622908), Lead (part Number- 963659008), Flap Compl. (part Number- 963677108), Suppor...
|
Value :
0
*
|
Refer Document
*
|
Due Date :
Closing today
|
28/03/2024
|
TID :70142327
Haryana
|
|
|
7. Sector : Education And Research Institute
Supply of table with marble or stainless steel tops with a minimum size 6x2x3, table with marble or stainless steel tops half standard size, drill machine, h saw preferably metal, b saw for sectioning bodies limbs, brain knife, mortuary cooler with arrangement to keep one body, storage tanks for cadavers to hold 10 cadavers static or movable durable tank with input output facility with lid, plastic tank for storing soft dissected parts, trolley table steel, x ray viewing lobby, meat cutting machine for thin body sections trans verticalfor gross anatomy sectional study, embalming machine, cabinet for slides 1000, hot plates for flattening sections, hot air oven for drying slides 45 degree c, refrigerators minimum 220 liters, marking pencils, specimen jar, incubators, faculty microscope, five headed microscope, binocular microscopes, disecting microscopes, rotary microtome, sledge microtome, paraffin embedding bath, chart diagrams models, radio frequency ablation pain clinic, cryostat, automatic tissue processor, demonstration eye piece, double demonstration eye piece, stage incubator, westergrens pipette for esr on st with space pipette, wintrobes pipette for esr pcv with st, hemoglobin meter with spaces, hemocytocytomater, thermometers balances micro slides glassware, centrifuge high speed with technometer, colorimeter photoelectric, ph meter electric, sphygmomanometer digital, stethoscopes, computerise polygraph 4 channel, spirometer ordinary, mossos ergograph, clinical thermometer, compass aesthesiometer, thermo aesthesiometer, algometer, knee hammer, stethograph, bicycle ergometer, olfactometer, ophthalmoscope, schematic eye, dynamometer, otoscope, stop watch, 12 channel ecg machine, yoga mate, venous pressure apparatus, douglas bag complete, basal metabolism apparatus, apparatus for passive movement, phakoscope, perimeter with charts listers, maddox rod, newtons color wheel, gas analyser automatic for co2 o2 n2, sherrington starling kymograph electrically driven, electromagnetic time marker, myograph st, electronic stimulator, tuning fork time marker 100 per sec, electrodes, spirit lamps, mareys tambour, low voltage unit for tapping 2 4 volts, refrigerator, water distillation steel with spare heating element, intubation set, pulse oximeter, ecg machine, featal doppler, skin hook single, skin hook double, needle holder different sizes, thread cutting scissors, aural cup forceps, nasal packing set, nasal packing forcep, nasal speculum cannula, sterilizer, cold room, magnetic stirrer, vortex mixture, centrifuge - equipment for basic science miscellaneous Qty 1628
|
Value :
0
*
|
Refer Document
*
|
Due Date :
8 Days to go
|
05/04/2024
|
TID :70459723
Assam
|
|
|
8. Sector : Education And Research Institute
Supply of Measuring Instruments Moving Coil Permanent Magnet Ammeter 0 To5to10a, Measuring Instruments Moving Coil Permanent Magnet Ammeter 50ma, Measuring Instruments Moving Coil Permanent Magnet Ammeter 100ma, Measuring Instruments Moving Coil Permanent Magnet Ammeter 1000ma, Measuring Instruments Moving Coil Permanent Magnet - Ammeter 0-10a-20a, Measuring Instruments Moving Coil Permanent Magnet Ammeter 0 To2.5 to 5a, Measuring Instruments Moving Coil Permanent Magnet Voltmeter 0 to 30v, Measuring Instruments Moving Coil Permanent Magnet Voltmeter 0to10to15v, Measuring Instruments Moving Coil Permanent Magnet Voltmeter 0to200to300v, Measuring Instruments Moving Coil Permanent Magnet Voltmeter 0to200 to 500v, Stabilized Dc Power Supply 230v, 50 Hz and Dc Output 0-10v, 0-1.5a , Stabilized Dc Power Supply 230v, 50 Hz and Dc Output 0-30v, 0-1.5a , Capacitors Enclosed in a Wood Box with Four Brass Terminals, Digital Multimeter 3.5 Digit Lcd Display Ac Voltage Measurement Upto 1000v 1a Current and Resistance Upto 10mohm, Analog Multimeter Ac Voltage Measurement Upto 1000v, 1a Current and Resistance Upto 10mohm, Earth Tester 500v, 0.10 100 Ohms with 3/4 Terminals Complete with All Accessories, Portable Moving Iron Voltmeter Or Ammeter 0to500mato1000ma, Portable Moving Iron Voltmeter Or Ammeter 0to5to10a, Portable Moving Iron Voltmeter Or Ammeter 0to2a, Portable Moving Iron Voltmeter Or Ammeter 0to125to250v, Portable Moving Iron Voltmeter Or Ammeter 0to250to500v, Portable Wattmeter Dynamometer Type Current Range 0 to 5to10a, voltage Range0 to 250to500v, Portable Wattmeter Dynamometer Type Current Range 0to5to10a, voltage Range 0 To125to250v, Sliding Rheostats Single Tube 150 Ohm 2a, Sliding Rheostats Single Tube 300 Ohm 5a, Sliding Rheostats Double Tube 500 Ohm 2a 3a, Sliding Rheostats Double Tube 440 Ohm 3a, Sliding Rheostats Double Tube 110 Ohm 10a, Dimmerstat Single Phase 0 230v, output 0 270v 10a, Inductance Coil Mounted with 2.5kw Variable Core, Variable Inductor Single Phase 250v 2.5kw Continuously Variable Core Type, Energy Meters Single Phase, Digital Type, 2 Wire, 50hz, 5a/10a, 250v, Energy Meters 3 Phase Induction Type 4 Wire 440v 20-40a 50 Hz, Power Factor Meter Dynamometer Type Range 0.5 Lag Unity 0.5 Lead, Load 3 Phase Variable Resistive Load 10kw Trolley Mounted, Load 3 Phase Variable Inductive Load 10 a Trolley Mounted, Lcr/q Bridge Meter, Auto Transformer 3- Phase, core Type, 0-470v, 10kva, 10a, 50 Hz Qty 453
|
Value :
0
*
|
Refer Document
*
|
Due Date :
8 Days to go
|
05/04/2024
|
TID :70491092
Uttar Pradesh
|
|
|
9. Sector : Education And Research Institute
Supply of Mechanical Lab Instruments (q3) Thermal Conductivity of Metal Rod Apparatus, Specifications, • Metal Bar Copper - 25 X 430 Mm Long, (approx), • Insulating Powder Shell – 200mm Dia, (approx), • Cooling Water Chamber – 100mm Dia X 75, Mm Long (approx), • Control Panel Comprising of –, A) Voltmeter 0 – 200 Volts., B) Ammeter 0 – 2amp, C) Digital Temperature Indicator, 0-300° C, 1, 2 Heat Transfer From a Pin Finapparatus, Specifications, • Fin – 12.5 Mm (approx) 15 Cm. Long, (approx). One Each of Mild Steel, Aluminum, and Brass. Duct Size – 10 Cm X 15 Cm X 80, Cm Long Blower of Suitable Capacity with 0.5, H.p. Single Phase Motor. Heater –, Nichrome Wire Type Bank Heater of Suitable, Capacity, • Control Panel Comprising of , A) Voltmeter – 0 – 200 Volts., B) Ammeter – 0 – 2 Amp, C) Dimmer Stat for Heater 0-230 Volts 2 Amp., D) Temperature Indicator – 0 – 300°c with, 10°c Least Count . Using Chrome, Alumel Thermocouples, Provided with Cold, Junction Compensation. Orifice Meter on, Blower Outlet with Water Manometer. Fins of, Other Materials Can Be Supplied at Extra, Cost., 1, 3 Emissivity Measurement Apparatus, Specifications, • Test Plate & Reference Plate Size – 160mm Dia., • Enclosure with One Side of Perspex Sheet., • H E a T E R- 2 0 0 V, 4 0 0 W a T T , n I C H R O M E W, I R E T Y P E .sandwiched Between Mica Sheets., • Control Panel Consisting of –, • Voltmeter – 0 – 200 V , , • Ammeter – 0 – 2 Amp, • D. P. D. T. Selector Switches for, Voltmeter & Ammeter., 1, Institute of Engineering and Technology, Mohanlal Sukhadia University, Udaipur (raj.) 313001, _____________________________________________________________________________________, • Digital Temperature Indicator 0-300°c., Usingchromel–alumelthermocouples Provided., • Dimmer Stats for Test Plate and Black Plate., Special Notes, Manufacturer Must Have R & D Centre Duly Recognized, By Department of Scientific and Industrial Research, , Ministry of Science and Technology., Oem/suppliers Should Have Iso & Ce Certified, Manufacturer Who Can Ensure the Manufacturing of, the Machine as Per the Required Testing, Standards/bs/bls/astm Standards and Within the, Specified Tolerance Limits. Oem Authorization Should, Be Compulsorily Attached with the Technical Bid., Oem Must Have the Authorized Service Center in, the State of Rajasthan, Oem/bidder Must, Attached Dsir Certificate with Technical Bid., 4 Stefan Boltzman Apparatus, Specifications, • Hemisphere Dia – 200 Mm (approx)., • Jacket Disc - 250 Mm., • Test Disc Size – 20 Mm Dia X 1.5mm Thickness., • Water Tank of Sufficient Capacity with a 1.5 Kw, Immersion Heater. Control Panel Comprises of -, I) Supply for Heater., Ii) Digital Temperature Indicator 0-200°c Using, Chormal- Alumel Thermocouples, , Provided with Cold Junction Compensation., Iii) Built in Timer for Temperature Readings at 5, Seconds Interval., 1, 5 Heat Transfer in Natural Convection Apparatus, Specifications, • Enclosure Size 20 Cm X 20 Cm X 75 Cm., • Tube Size (test Cylinder) 38mm (o. D.) X 50, Cm Long, • Nichrome Heater (cartridge Type), • Control Panel Comprising Of, I) Voltmeter – 0 – 200 V, Ii) Ammeter – 0 – 2 Amp, Iii) Dimmerstat - 0 - 2amp, 240v, Iv) Digital Temperature Indicator 0-200°c Using, Chormal- Alumel Thermocouples, , Provided with Cold Junction Compensation, 1, 6 Critical Heat Flux Apparatus, Specifications, • Voltmeter 0 - 200 Volts, • Ammeter 0 - 5 Amp, • Cylindrical Glass Vessel Diameter 200mm, Approx., • Cylindrical Glass Vessel Height 125mm, Approx., • Bulk Heater - Nichrome Coil., • Test Heater - Nichrome Wire., 1, Institute of Engineering and Technology, Mohanlal Sukhadia University, Udaipur (raj.) 313001, _____________________________________________________________________________________, • Thermometer - 10° to 100°c., 7 Parallel Flow and Counter Flow Heat Exchanger, Specifications, • Length of Heat Exchange 1.6 M Outer Late, Material G. I., • I. D. – 27.5mm O. D. – 33.8mm, • Inner Tube Material – Copper O.d, 12.7mm, • Thermometer 0° to 200°c–1nos., • Geyser – Instantaneous Type. 3kw Capacity – 1 No., • Measuring Flask – 1000 with Stop Clock., 1, 8 Heat Transfer in Forced Convection, Specifications, • Dia & Length of Test Section – 28 (approx.) X, 40 Cms., • No. of Thermocouples – 6 Nos., • Nichrome Heater of Suitable Capacity, • Blower 0.5 H.p. with Motor with 12” of, Wgp., • Orifice & U Tube Manometer., • Control Panel Comprising of, I. Dimmer Stat 240 V, 2 Amp, . A.c., Ii. Voltmeter 0 - 200 V., A.c., Iii. Ammeter 0 - 200 V., A.c, , Special Notes, Manufacturer Must Have R & D Center Duly Recognized, By Department of Scientific and Industrial Research, , Ministry of Science and Technology., Oem/suppliers Should Have Iso & Ce Certified, Manufacturer Who Can Ensure the Manufacturing of, the Machine as Per the Required Testing, Standards/bs/bls/astm Standards and Within the, Specified Tolerance Limits. Oem Authorization Should, Be Compulsorily Attached with the Technical Bid., Oem Must Hav...
|
Value :
0
*
|
Refer Document
*
|
Due Date :
9 Days to go
|
06/04/2024
|
TID :70546661
Rajasthan
|
|
|