|
Requirement :
|
Supply of Materials (Re-Tender) -0.35 mm Galavanized Steel Boalts and Nuts (6 mm dia & 25 mm Long Round Head with Slots), 0.35mm Powder Coated Sheet, 1157-Stone for masonry work, 1190-Second class teak wood in planks, 1550-G.I pipes 50 mm dia, 595-Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, 597-Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, 637-Bright finished or black enameled mild steel screws 40 mm, 640-Bright finished or black enameled mild steel screws 20 mm, 7029-Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, 7319-wall form panel 1250x500 mm, 7326-Corner angle 45x45x5 mm 1.50 m long, 7327-100 mm channel shoulder 2.5 m long, 7328-Double clip (bridge clip), 7329-Single clip, 7330-M.S. Tube 40 mm dia, 983-Coarse sand - zone III (M-Sand for ) plastering Works), Anjili Wood Scandals, Bitumen Washer, Flats Upto 10 mm in Thickness, Galavanized Steel J or L Hooks (8 mm dia ), GI Limpest Washer, Mild Steel Round Bar Above 12 mm Dia, MR4-Solid blocks of size 30x20x15cm, MR94-Quarry Waste, MR-WOODEN PLANKS, Pink Primer for Wood, Polythylene water storage tank with cover and suitable locking arrangement, Precasted Ring (120 cm dia inner and 135 cm outer dia ,35 cm hight ), Precasted Ring (135 cm dia inner and 152 cm outer dia ,35 cm hight ), Precasted Ring (152 cm dia inner and 168 cm outer dia ,35 cm hight ), Precasted Ring (230 cm dia inner and 245 cm outer dia ,35 cm hight ), PVC Bend 63 mm Dia, PVC Door tee 63 X 63X 63 mm dai, PVC Elbow 63 mm dia, PVC End Cap 63 mm dia, PVC pipe 63 mm Outer Dia 6 Kgf/cm2, PVC Reducer 63X 50 mm, Rawl Plug 50 mm (Designation 10 Nos), RCC Collares (300mm Dia), RCC Collares (450mm Dia), RCC Pipes (300mm Dia), RCC Pipes (450mm Dia), Red Oxide Zink Cromite Primer, Royality for good earth, Safeda Ballies 125 mm diameter, Second Class kail wood in planks, Second Class kail wood in scanting, Steel, Welding by electric plant, Wire nails.
|