5.
Kerala Tenders
Biz value: INR 83.43 Lac
Bid Before:29 March 2023 2 Days to go
Village Panchayat
Supply of Material supply for mgnregs works, Beam clamp 300-380 mm (450-1070 mm) , Bitumen washer , Cheru narakam/Bamblose Narakam Seedling , Coarse sand (zone III) , Dry distemper , Epoxy paint , Fine sand (zone IV) , G.I Limpet washer , Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots , Galvanised steel J or L hooks 8 mm dia , Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm , GI trafford profile sheet 0.35mm thick , Grafted Jack Fruit Sapling , Grafted Mango Sapling , Interlocking C.C. paver block (80 mm thick, M-30) , Metal Primer (U.G.) , Mild steel tubes hot finished welded type , Multi surface paint , Portland Cement , Quarry Waste , Rambutan Sapling , Red oxide Zinc chromate primer , Sapota graft , Solid blocks of size 40x20x20cm , Stone Aggregate(single size) 06 mm nominal size , Stone Aggregate(single size) 10 mm nominal size , Stone Aggregate(single size)20 mm nominal size , Stone for masonry work , Twisted steel/deformed bars , Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre , Welding by electric plant , Wire nails , Polyurethene bags, Green Net 75% shade.
Tag a friend
Hashtag & Get Tender
Probable Participants
6.
Kerala Tenders
Biz value: INR 76.12 Lac
Bid Before:30 March 2023 3 Days to go
Village Panchayat
Supply of material for mgnregs meterial supply, Stone Aggregate(single size) 40 mm nominal size, Stone Aggregate(single size)20 mm nominal size, Stone Aggregate(single size) 10 mm nominal size, Coarse sand (zone III), Portland Cement, Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper, Vibrator (Needle type 40 mm), Quarry Waste, Fine sand (zone IV), Solid blocks of size 40x20x15cm, Solid blocks of size 40x20x10cm, Gravel 5 mm to 10 mm, Gravel 1.5 mm to 2 mm, Mild steel tubes hot finished welded type, Welding by electric plant, GI trafford profile sheet 0.35mm thick, Bitumen washer, Stainless steel screws 50 mm, Twisted steel/deformed bars, Red oxide Zinc chromate primer, 200 mm Aluminium aldrop, Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, Wire nails.
Tag a friend
Hashtag & Get Tender
Probable Participants