|
|
|
2.
Jharkhand Tenders
Biz value: INR 221.95 Cr
Bid Before:06 February 202116 Days to go |
| Central Coalfields Limited |
| Planning, design, engineering, construction, fabrication, erection, supply, installation, testing, trial run and commissioning of coal handling plant (5.0 mtpa) for konar ocp consisting of all civil, structural, electrical and mechanical works and all other accessories and facilities required to make it complete in all respects on turnkey basis and operation & maintenance of plant for five years. |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
3.
Delhi Tenders
Biz value: INR 89.76 Cr
Bid Before:08 February 202118 Days to go |
| Delhi Metro Rail Corporation Limited |
| Architectural finishing works including design, fabrication, supply, erection & roof
sheeting of prefabricated steel roof portal pre- engineered building (peb) structures & foot over bridge (fob)
including design & construction (substructure & superstructure) & necessary changes in existing station for
connection of fob, external facade, water supply, sanitary installation, drainage, site development works at
seven elevated stations namely keshopur, paschim vihar, peeragarhi, mangol puri, west enclave, pushpanjali &
deepali chowk on janakpuri west to r.k.ashram corridor (extn. of line-8) of phase-iv of delhi mrts. |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
|
|
5.
Delhi Tenders
Biz value: INR 38.13 Cr
Bid Before:27 January 20216 Days to go |
| Water And Power Consultancy Services Indian Limited |
| Procurement, supply and commissioning of 04 nos. heavy duty direct circulation rotary rigs of 500 meter well construction capacity drill pipes of nc 50 tool joints (4½” if) of size 127mm (5”), external upset, grade e. range one 6.1 m (20 feet) long, weight 24.7 kg/m with steel thread protectors., drill pipes 88.9 mm (3.5 in), nc 38 if tool joints, external upset, grade e, ranqe one 6.1 m (20 feet) lonq, weight 19.8 kg/m with steel thread protectors., triple sheave travelling block with single latching hook, capacity not less than 500 kn, 152 mm (6 in) x 7.50 m (25 ft) long suction hose with fittings, strainer, and foot valve, 76.2 mm (3 in) x 10 m (33 ft) long high pressure wire braided swivel hose complete with fittings and mud mixing gun., drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 203.2 mm x 6.1m (8 in x 20 ft), 167.3 mm (6-5/8 in) rh reg threads with steel thread protectors, drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 158.8 mm x 6.1m (6-1/4 in x 20 ft), 88.9 mm (4½ in) rh reg threads with steel thread protectors, kelly saver sub box to pin (4½" if) made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 (each size drill pipe - 2 nos), box (4½” if rh) to pin (3½ if rh) sub for kelly saver to 88.9mm drill pipe, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75cm., box (4 ½” if rh) to pin (4½” if rh)sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75m., box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (4½” reg rh) to box (4½" reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (6 5/8” reg rh) to box (6 5/8” reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (4½” if rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, sub for attaching fishing tools (si. no 79 to 87) with 88.9mm drill pipe (one set will contain two number of subs for each different size to fishing tools joints), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½" reg rh connection) x box (4 ½” reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (6 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (7 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box 3 ½” if, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box 6 5/8” reg rh connection to box ( 6 5/8" reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh conne |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
|
|
7.
Chhattisgarh Tenders
Biz value: INR 28.13 Cr
Bid Before:08 February 202118 Days to go |
| South East Central Railway |
| Excavation of trenches, laying of signaling, telecom & power cables, casting of foundation &erection of apparatus cases, junction boxes, signals, fixing of power equipments, relays, installation of relay racks, track circuits, electric point machines, data logger, msdac & provision of auto signalling between champa & gevra road station of division of s.e.c. railway. |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
8.
Tamil Nadu Tenders
Biz value: INR 25.05 Cr
Bid Before:02 February 202112 Days to go |
| Public Works Department |
Providing internal room arrangements, kitchen equipments, fire fighting, drainage, play ground, front elevation and other amenities etc., to new medical college residential buildings at namakkal in namakkal district.
Construction of mani folding room, ht room, laundry, mortuary block, bio medical waste room etc., and providing internal and external water supply and sanitary arrangements, renovation works in existing hospital buildings, ward arrangements, internal road arrangements fire fighting arrangements and other amenities etc., to new hospital building at tiruppur in tiruppur district.
Providing internal and external water supply and sanitary arrangements, internal road arrangements, etp arrangements, front elevation, internal arrangements to auditorium etc., and other amenities etc., to college buildings in new government medical college and hospital buildings at in nagapattinam district.
Construction of compound wall for boys hostel, internal road arrangements, providing external water supply and sanitary arrangements, front elevation, internal arrangements for lecture hall and examination hall, men's and ladies hostel and other amenities etc., for the main work of construction of infrastructure facilities to increase mbbs seats from 150 to 250 in government coimbatore medical college at coimbatore district. |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
|
|
|
