|
|
|
|
|
|
|
|
|
|
|
|
|
7.
Uttar Pradesh Tenders
Biz value: INR 1.57 Cr
Bid Before:08 July 20224 Days to go |
| Lucknow Development Authority |
Civil work at gomti nagar yojna ke vikrant khand isthit parijat apartment (part-a).
providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (s.i. no 13.80 page no.-6).
providing and fixing m.s. tubular frames for doors, windows, ventilators and cupboard with rectangular/ l-type sections, made of 1.60 mm thick m.s. sheet, joints mitred, welded and grinded finish, with profiles of required size, cluding fixing of necessary butt hinges and screws and applying a iming coat of approved steel primer fixing with 15x3 mm lugs 10 cm long embedded in cement ncrete block 15x10x10 cm of c.c. 136 (1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size). (s.i. no. 10.15.1) page no. 24 (rate 114.00).
finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade old work (one or more coats applied @ 0.83 ltr/10 sqm). (apex ultima, weather coat all guard) assian, berger (pwd sor 20-21 (13.112.2).
painting or varnishing on iron works in small areas or new wood work one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t&p etc. required for proper completion of work. paint to be used should confirm to the isi no. 103-1950.
wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade one or more coats on old work.
providing and fixing 18 mm thick raj nagar plain white marble/ udaipur green marble/ zebra black marble gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 14 (1 cement 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish 8.2.1) pwd sor 20-21/ (8.2.1).
providing and fixing m.s. tubular frames for doors, windows, ventilators and cupboard with rectangular/ l-type sections, made of 1.60 mm thick m.s. sheet, joints itred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 136 (1 cement 3 coarsesand 6 graded stone aggregate 20 mm nominal size).
providing & laying of chlorinated polyvinryl-chloride (cpvc) pipe.
cutting hole up to 15 x 15 cm. in r.c.c. floor and roof for passing drain pipe etc. and repairing the hole after inserting of drain pipe etc. with cement concrete 124 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm. nominal size) including finishing complete so as to make it leak proof.
arrangement of plumber, helper, labour, sweeper.
for working position realying rain water harvasting in all complete. (analysis rate) class 150 brick work in 14 cement & corse sand in foundation.
12 mm thick cement plaster in 14 cement & corse sand. pwd sor 20-21/si-13.4.1.
providing and laying in position cement concrete of specified grade excluding the cost of centering and uttering - all work up to plinth level 124 (1 cement 2 coarse sand (zone-iii) derived from natural sources 4 graded stone aggregate 20 mm nominal size pwd sor 20-21/si-4.1.3.
providing & fitting of 1 h.p. water pump in all complete.
providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc complete.
providing & fitting 4 h.p. submersible pump in all complete.
providing & laying of water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying a) after surface paration, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. b) laying second layer of fibre glass cloth when the first layer is still green. overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. this will be allowed to air cure for 4 hours followed by water curing for 48 hours. the entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. for the purpose of measurement the entire treated surface will be measured.
... |
|
Tag a friend
Hashtag & Get Tender
Probable Participants
|
|
|
|
|
|
|
|
