|
|
|
|
|
3. Sector : Civil Works
Civil work - providing and laying in cement concrete148 (1 cement 4 coarse sand 8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form-work,in foundation and floors., making drain along apron. (150x150mm), same as in item 5 at second floor., with necessary screw sextra for providing and fixing flush doors with decorative veneering insteadof non decorative isi marked flush door shutters conforming to is 2202, providing and fixing fly proof galvanized m.s. wire gauge to windowsand clerestory windows using wire gauge with average width of aperture1.4 mm in both directions with wire of dia 0.63 mm all completewith 12 mm mild steel u beading, 30 mm thick shutters mosquito proof jaliwith isi marked m.s. pressed butt hinges brightfinished of required sizekiln seasoned and chemically treatedhollock wood, mild steel for rcc work, 12 mm cement plaster in single coat onfair side of single or half brick wall for interior plastering up tofloor two level including brick wallfor interior plastering upto floor twochamfers, and / or rounded angles notexceeding 80 mm in girth and finishedeven and smooth no. Extra for mixing anyadditive. (1)1 cement 6 c sand, 12mm cement plaster in single coat onrough side of single or half brick wall for interior plastering up to floortwo level including internal roundedangles not exceeding 80 mm in girthand finshed even and smooth. (1)1 cement6c sand, plastering on ceiling and soffits of sssds, plastering on wall.(14), making grooves 10 to 12 mm widex 8mmdeep in plaster of the wallor in ceilingvertically or horizontally as required., add for plaster drip course/ groove in plastered surface or moulding tor.c.c. projections, cement concrete flooring 124 (1 cement2 coarse sand 4 graded stone aggregate20mm nominal sizelaid in onelayer neatcement(40 mm thickfloor). , 20 mm thick cement plaster in dado/skirting in 12 consistingof onepart ofcement and 2partsof aprovedcoarse sandlaid inpanels,finished with 3mm floatingcoat of neat cement or cement and marbledust in ratio of 51 including supply ofall materials labour t & p etc. Requiredfor proper completion of the work., p/l 25mm thick kota stone flooring over20mm thick base of cement mortar14(1cement4 coarse sand) laid over jointed withgrey cement slurry mixed with pigment tomatch the shade of slab includin grubbingand polishing complete., 20mm thick kota stone in dado/skirting in 12 consistingof one part ofcement and 2 partsof aprovedcoarse sandlaid inpanels,finished with 3mm floatingcoat of neat cement or cement and marbledust in ratio of 51 including supply ofall materials labour t & p etc. Requiredfor proper completion of the work., p/l 20mm thickist quality ceramic flooring over20 mm thick base of cement mortar14(1cement4 coarse sand) laid over jointed withgrey cement slurry mixed with pigment to match the shade of slab includin grubbingand polishing complete.(628 ), painting ist coat over priming coat (butexcluding cost of priming coat) on steeland other metal surfaces up to 10 cm.width or girth or small articles notexceeding 0.10sqm in area white superiorsynthetic enamel such as luxol3,hi-glossapcolite superlac, dulux specifiedbrushing to give an even shade andincluding cleaning the surface of alldirt,dust and other foreign matter sandpapering and stoping including cost ofall materials, labour tools and plantsetc. Required for proper completion ofthe work, same as item 30 above but on new woodsurface., finishing walls with water-proofing oncement paint of approved make such assuper snowcem,durrocem,robiacem,guttucemsupercem quality and of required shadeon undecorated wall surfaces (two coat)overone and including one coat whitecement primer to give an even shadeafter thoroughly brushing the surface topowdered materials including curing andcost of all materials., distempering (two coat) with oil bounddistemper of approved brand andmanufacture & of required shade onundecorated wall surface to give an evenshade over & including a priming coatwith cement primer of approved brand &manufacture such as berger,j&n, shalimarasian paints after thoroughly brushingthe surface free from mortar droppings &other foreign matters & also includingpreparing the surface even with plasterof paris or approvedsynthetic material &sand papered smooth including cost ofallmaterials. , distempering (two coat) with oil bounddistemper of approved brand andmanufacture & of required shade onundecorated wall surface to give an evenshade over & including a priming coatwith cement primer of approved brand &manufacture such as berger,j&n, shalimarasian paints after thoroughly brushingthe surface free from mortar droppings &other foreign matters & also includingpreparing the surface even with plasterof pa...
|
Value :
INR 1.89 Cr
*
|
INR 18.97 Mn
*
|
Due Date :
5 Days to go
|
30-05-2020
|
|
TID :39601913
Uttar Pradesh
|
|
|
|
4. Sector : Banking and Mutual Funds and Leasings
Procurement and installation of electrician trade equipments, machinery - c- clamp, c- clamp, spanner adjustable drop forged, blow lamp brass, chisel cold, chisel firmer with handle, allen key alloy steel set, grease gun, bradawl, pulley puller with 3 legs, bearing puller inside and outside, pipe vice cast iron with hardened jaw open type, scissors blade, ss, crimping tool, wire cutter and stripper, mallet hard wood (with handle), hammer extractor type, hacksaw frame, hacksaw frame (adjustable), try square, outside caliper, inside caliper, divider 150 mm spring type, plier, long nose insulated, pliers flat nose insulated, pliers round nose insulated, tweezers, snip straight and bent heavy duty, de metric spanner double ended (set), drill hand brace, drill ss twist block, plane, cutters, smoothing cutters, gauge, wire imperial stainless steel marked in swg & mm, file flat (with handle), file half round (with handle), file round (with handle), file flat rough (with handle), file flat bastard (with handle), file flat, smooth (with handle), file rasp, half round (with handle), copper bit soldering iron (with stand), de-soldering gun, hand vice, table vice, oil can, contactor and auxiliary contacts, contactor and auxiliary contacts, limit switch, rotary switch, relays - cut out, relays - reverse current, relays - over current, relays - under voltage, pin type, shackle type, egg type & suspension type insulators including hardware fitting, hydrometer, hand drill machine, portable electric drill machine, load bank lamp/ heater type, brake test arrangement with two spring balance rating, laboratory type induction coil, out side micrometer, thermometer digital, series test lamp, knife switch dpdt fitted with fuse terminals, knife switch tpdt fitted with fuse terminals, miniature breaker, earth plate, earth electrode, mccb, elcb and rccb, fuses, rheostat ( sliding type ), capacitors, various electronic components, various lamps, plug, socket, piano switch, lamp holder, bus bar with brackets, rubber mat (heavy duty), electrician helmet, rcc pole with accessories (ms angle iron, ‘c’ clamp, stay insulator etc.) and materials, kilowatt meter analog, digital wattmeter, a c energy meter, a c energy meter, power factor meter digital, frequency meter, magnetic flux meter, lux meter, tachometer, tachometer sensor type digital tachometer,, tong tester/ clamp meter, megger, dc starter, 3-point, dc starter, 4-point, wheatstone bridge with galvanometer and battery, single phase variable auto transformer, phase sequence indicator, growler, a c starters. ac motors - resistance type starter, discrete component trainer, linear i.c. trainer, digital i.c. trainer, domestic appliances.- electric induction plate, domestic appliances- electric kettle, domestic appliances- electric iron, domestic appliances- electric immersion heater, domestic appliances- electric ac ceiling fan and ac table fan, domestic appliances- electric geyser storage type, domestic appliances- electric elec. mixer & grinder, domestic appliances- washing machine, domestic appliances- motor pump set, oil testing kit, inverter with battery, voltage stabilizer, dc power supply, battery charger, current transformer, potential transformer, solar panel with battery, pillar electric drill machine motorized, motorized bench grinder, a.c. series type motor, single phase capacitor motor with starter switch, manual motor coil winding machine, ceiling fan coil winding machine, primary current injection set, stepper motor with digital controller, shaded pole motor, fire extinguisher co2, fire buckets with stand, hand tools storage drawers for all hand tools, measuring equipment’s storage drawers, product display show case.
|
Value :
1.60 Cr
*
|
16 Mn
*
|
Due Date :
5 Days to go
|
30-05-2020
|
|
TID :39052161
Uttaranchal
|
|
|
|
5. Sector : Other Services
Supply of materials, picked jhama bricks, 1st class bricks, 37.5 mm stone singles, 20 mm down stone bazree, medium sand, cement, rod ( m.s/tor), shuttering, m.s structural works with hollow sections ( square or rectangular shape ) conforming to is806-1957 & is1161-1958 ) connected to one another with bracket ,gusset,cleat as per design , drawing & direction of engineering., asbestos corrugated ( tradfford or similar approved quality)sheet (6 mm thick) work ( excluding the supporting frame work)fitted and fixed with 9.5 mm.dia.j or l hook-bolt and nuts,limpet and bitument washers and putty with 150 mm end lap & one corrugation minimum side lap complete.(payment should be made on area of finished work), asbestos ridging (with standard lap) fitted and fixed with necessery hook,bolts,nuts,washers,etc complete, holding down bolt (16mm dia & 450 mm long), g.i wire mesh, local hard wood, lime, gum, bamboo for fencing, nylon net, supplying & fitting,fixing door of g.i sheet with wooden frame, display board for construction of poultry shed of 121 nos self help groups of pundibari gp
|
Value :
INR 88.89 Lac
*
|
INR 8.88 Mn
*
|
Due Date :
8 Days to go
|
02-06-2020
|
|
TID :39592682
West Bengal
|
|
|
|
6. Sector : Education And Research Institute
Supply of spares rotation unit, modified trans shaft, bolt special, bolt special, o ring for seal kit, back up ring for seal kit, seal brush hyd chuck for seal kit, key sq 1/2x1/2x4-1/4 lg for rebuilt kit, gasket .062 thk for rebuilt kit, gasket transmission mount for rebuilt kit, gasket pump mount for rebuilt kit, gasket plastic tran for rebuilt kit, gasket steel for rebuilt kit, gasket thk for rebuilt kit, filter assy for rebuilt kit, speedi sleeve p-spindle for rebuilt kit, hyd pump assy head lube for rebuilt kit, speedi sleeve 55.00mmgold for rebuilt kit, seal excluder 5.865x.375x for rebuilt kit, oil seal 5-7/8 id x 6-7/8 od x for rebuilt kit, oil seal for rebuilt kit, gasket front cover for rebuilt kit, gasket side cover for rebuilt kit, gasket pump for rebuilt kit, bearing roller thin section (61830ma) for rebuilt kit, bear. sphe. roller thrust (29330e) for rebuilt kit, bearing (6211) for rebuilt kit, hv chain for rebuilt kit, o-ring for rebuilt kit, transparent tubing 1/2" id for rebuilt kit, snap ring for rebuilt kit, bearing (6211nr) for rebuilt kit, kit needle roller brg, rebuilt kit", bearing needle for rebuilt kit, coupling tran/mtr/cs1000 for rebuilt kit, coupling trans assy for rebuilt kit, gasket .015 thk for rebuilt kit, gasket .032 thk for rebuilt kit, keywood ruff for rebuilt kit, pin head mount, assy. head mount pin, support transmission, bushing pressfit, flange bushing, jaw spring, jaw nq, hyd motor assy rotation, adapter sae, gear, shaft input, cradle and feed assembly, upper guide plate- left, upper guide plate- right, cylinder holder, slotted screw, shaft, key plate, screw, wear plate, wear plate, screw, washer, lock nut, distance plate, rod holder, v-block, guide socket, control panel, rpm adjustment, pressure gauge, flush pump and mud mixture, hydraulic motor tyroa, coupling, crown block, idler pulley, main pulley, idler shaft, water swivel 25000 t.c., spindle extention, o- ring, teflon packing/packing set for atlas copco/epiroc make hydrostatic drill rig model ct 14 of kusmunda exploration camp of ri v, cmpdi.
|
Value :
INR 83.75 Lac
*
|
INR 8.37 Mn
*
|
Due Date :
10 Days to go
|
04-06-2020
|
|
TID :39617841
Chhattisgarh
|
|
|
|
|
|
8. Sector : Coal and Lignite
Supply of spares, shaft sleeve, sleeve nut, bearing bush , large seating & bush , neck bush (bronze), wearing ring casing, split gland (bronze), impeller (bronze), pump shaft, imp. key , wearing ring, sleeve nut & lock nut for sleeve , impeller (bronze), gland half (bronze), sleeve nut & lock nut for sleeve (d.e.) steel, sleeve nut (d.e.), sleeve nut (n.d.e.), bearing bush (d.e. & n.d.e.), shaft sleeve (n.d.e.), shaft sleeve (d.e.), impeller (bronze),, imp. key (en9), pump shaft , impeller , brg. housing bracket (n.d.e.) c.i, lock nut for bearing , lock washer for bearing , bearing cover, sleeve nut, key for impeller , for flowmore make pumps
|
Value :
INR 54.16 Lac
*
|
INR 5.41 Mn
*
|
Due Date :
4 Days to go
|
29-05-2020
|
|
TID :39615098
Maharashtra
|
|
|
|
9. Sector : Security Services
Supply of cement (50 kg pack), white cement(50kg pack), narmada sand, jeera dust, kali gitti (20mm), kali gitti (40mm), kali gitti(06mm), kopra (per ghan fit), loha sariya (6mm under weight), loha sariya (vibhinn size), binding wire(tar), veldmesh 11 gage 1x1, veldmesh 13 gage 1x1, g.i. chadar nalidar (vibhinn size colour coated), white putti, seremic tiles 16x16, tiles 12x12, tiles 8x12, tiles 18x12, vetrified tiles 2x2, pipe p.v.c 3 inch(10fit size), pipe p.v.c 4 inch(10fit size), p.v.c. band 4 inch, p.v.c. murga 4 inch, p.v.c. tey 4 inch, p.v.c. joint socket pipe 4 inch, p.v.c nani trip 4 inch, p.v.c nani trip 3 inch, p.v.c,joint socket pipe 3 inch, p.v.c band 3 inch , p.v.c.tey 3 inch, toilet seat various size with flash, western style toilet seat complete, washwashin complete, urinal seat male complete, urinal seat female, pani ki tanki (500 ltr), pani ki tanki (1000 ltr), steel toti, brick (sada), brick (chimney), brick (cement), clay fly ash brick, kitchen sink, g.i. pipe 03 inch 10 or 20 feet, g.i. pipe 02 inch 10 or 20 feet , g.i pipe 01 inch 10 feet , g.i.pipe 3/4 inch 10 feet , g.i pipe 1/2 inch 10 feet , u.p.v.c. pipe 1/2 inch 10 feet, u.p.v.c. pipe 3/4 inch 10 feet, u.p.v.c. pipe 1 inch 10 feet, g.i. socket 2 inch, g.i.socket 1 inch, g.i.socket 3/4 inch, g.i.socket 1/2 inch, u.p.v.c. toti 1/2 inch, u.p.v.c. union 1/2 inch, u.p.v.c. union 3/4 inch, u.p.v.c. union 1 inch, u.p.v.c. socket 1/2 inch, u.p.v.c. socket 3/4 inch, u.p.v.c. socket 1 inch, u.p.v.c. point elbow 1/2 inch, u.p.v.c. point elbow pone inch, u.p.v.c. point elbo 1 inch, u.p.v.c. tey 1/2 inch, u.p.v.c. tey 3/4 inch, u.p.v.c. tey 1 inch, u.p.v.c. walve 1/2 inch (brass thread), u.p.v.c. walve 3/4 inch (brass thread), u.p.v.c. walve 1 inch (brass thread), connection nippal 1/2 inch, connection nippal 3/4 inch, connection nippal 1 inch, p.v.c. toti 1/2 inch, pilor cock, angel cock, bib cock, two way cock, j hook complete, white marble, green marble, granite, p.v.c. nani trip 1 inch, p.v.c. nani trip 2 inch, pvc point tee 1x1/2, pvc point albow 1x1/2, pvc f.t. 1 inch, pvc f.t. 1/2 inch, pvc f.t. 3/4 inch, pvc m.t. 1 inch, pvc m.t. 1/2 inch, pvc m.t. 3/4 inch, solvent (400 gram pack me), teflon tap, marble cutting blade 4 inch, loha cutting patthar 4 inch, loha ghisai patthar (grinder) 4 inch, loha patti 3/4 25x5 35x5 40x5 45x5 size me, oil paint, loha primer, tarpin tel, cement primer, distemper, distemper (imulson), teracota (experia), retmal ( different no. me), chicken mess (size 3x50), loha machchar jali 3 4 5 6 fit arz me, steel machchar jali 3 4 5 6 fit arz me, welding rod central jail.
|
Value :
50 Lac
*
|
5 Mn
*
|
Due Date :
1 Day to go
|
26-05-2020
|
|
TID :39256894
Madhya Pradesh
|
|
|
|
10. Sector : Municipal Corporations
Supply of martial - stone screening type a (13.2 mm), stone screening type b (11.2mm), stone aggregate(single size) 06 mm nominal size, stone aggregate(single size) 10 mm nominal size, stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)20 mm nominal size, portland cement, hire charges of diesel road roller- 8 to 10 tonne, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), fly ash bricks(traditional), coarse sand, medium sand, fine sand, silver sand, coloured inter locking c.c. paver block, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, rcc pipe 900 mm dia np - 3 spigot, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, galvanised steel plain sheets, seam bolts and nuts 6 mm dia and 25 mm long, g.i. plain washer for seam bolts, stainless steel bolts /square bar and plates, welding by electric plant, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, brick aggregate (single size)40 mm nominal size, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), nylon net, paddy straw, g i wire, wire mesh (rabbit), sal silliguri, other local wood, ordinary teak wood, sisu/gamar wood, float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, coal tarring, hydraulic door closer tubular type aluminium section body, brass 150 mm floor door stopper (0.357 kg), anodised aluminium hanging type door stopper, chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, frp composite door frame 66mm x 90mm, frp composite door frame 66mm x 70mm, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, supplying solid flush type doors of commercial quality, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia, fencing post 215 cm 150 mm x 150 mm section at bottom, 100 mm x 100 mm section at top with t-base 300 mm x 150 mm x 100 mm,...
|
Value :
INR 50 Lac
*
|
INR 5 Mn
*
|
Due Date :
Closing today
|
25-05-2020
|
|
TID :39495844
West Bengal
|
|
|