|
1. Sector : Business Consultancy
Procurement, supply and commissioning of 04 nos. heavy duty direct circulation rotary rigs of 500 meter well construction capacity drill pipes of nc 50 tool joints (4½” if) of size 127mm (5”), external upset, grade e. range one 6.1 m (20 feet) long, weight 24.7 kg/m with steel thread protectors., drill pipes 88.9 mm (3.5 in), nc 38 if tool joints, external upset, grade e, ranqe one 6.1 m (20 feet) lonq, weight 19.8 kg/m with steel thread protectors., triple sheave travelling block with single latching hook, capacity not less than 500 kn, 152 mm (6 in) x 7.50 m (25 ft) long suction hose with fittings, strainer, and foot valve, 76.2 mm (3 in) x 10 m (33 ft) long high pressure wire braided swivel hose complete with fittings and mud mixing gun., drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 203.2 mm x 6.1m (8 in x 20 ft), 167.3 mm (6-5/8 in) rh reg threads with steel thread protectors, drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 158.8 mm x 6.1m (6-1/4 in x 20 ft), 88.9 mm (4½ in) rh reg threads with steel thread protectors, kelly saver sub box to pin (4½" if) made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 (each size drill pipe - 2 nos), box (4½” if rh) to pin (3½ if rh) sub for kelly saver to 88.9mm drill pipe, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75cm., box (4 ½” if rh) to pin (4½” if rh)sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75m., box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (4½” reg rh) to box (4½" reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (6 5/8” reg rh) to box (6 5/8” reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (4½” if rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, sub for attaching fishing tools (si. no 79 to 87) with 88.9mm drill pipe (one set will contain two number of subs for each different size to fishing tools joints), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½" reg rh connection) x box (4 ½” reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (6 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (7 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box 3 ½” if, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box 6 5/8” reg rh connection to box ( 6 5/8" reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box (7 5/8" reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, pin (4 ½” regular rh connection) to box (3 ½” if rh connection), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 sub, box (4 ½” if connection) to box (4 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½” if connection) to box (3 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3 ½” if connection) to box (3 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, any other size sub required for forming drill string, and shall be made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, type c rotary tong, 60.3 mm x 273 mm (2-3/8 in x 10-3/4 in), com...
|
Value :
INR 38.13 Cr
*
|
INR 381.35 Mn
*
|
Due Date :
2 Days to go
|
27/01/2021
|
|
TID :42170570
Delhi
|
|
|
|
2. Sector : Power Plant
Procurement of spares, filter bags, bag filter cage, blow pipe with nozzles, pulse jet valve with pilot, pipe, main door gasket, d.p. arrangement, manual valve 20 nb, check valve 20 nb, differential pressure switch, pressure gauge, wire breaded hose with clamps (40 nb), transfer hopper, fluidizing tiles, vent valve assembly, surge hopper, pneumatic ball valve, 3 way single quail solenoid valve, spring loaded check valve/ diaphragm valve, hose and connector, bend, butter fly valve with actuator 300 nb, gi pipes & fittings, gi nipple, gi union etc for re commissioning of stand by stream of fly ash disposal system of unit no 1 to 4 for ahp i and ii sgtps mppgcl.
|
Value :
1.79 Cr
*
|
17.93 Mn
*
|
Due Date :
2 Days to go
|
27/01/2021
|
|
TID :41773614
Madhya Pradesh
|
|
|
|
3. Sector : Shipping
Supply of spares for cargo handling equipments in kmtt, project, myanmar, tyres, tube & rims set, engine service kit (including lube oil & fuel filters), radiator, control valve assembly 36812775, starter, alternator, temperature sensor 36812113, oil seals for all types, solenoid valve assembly, gaskets, o rings sets, main control lever, lift cylinder, oil pressure sensor unit, limit switch assembly, engine stop solenoid, ignition switch, battery 12v, 80ah, fuse 15a & 20a, cylinder liner, fan belt, lube oil pump, bearing for all brake shaft, thrust bearing, pinion shaft, front and rear, brake shoe assembly, hydraulic hoses for all types, chain assembly, front tyres, tube & rime set, rear tyre tube &rim set, battery, starter, alternator, clutch plates, brake linings, fuses (all rating used), bulbs (head light, blinkers & rear lamp) each, drive belts, turbo charger, fuel injection pump, radiator assembly, hydraulic pump, thermostat, hour meter, hydraulic hoses, rims, tyres and its tube set, bearings (inner & outer), brake & lever assembly, tyres, tube & rims set, alternator, relays 24v, fuse for all rating each, load cell assembly, direction sensor 161-007-00, potentiometer assembly 161-023-03, battery 12v,, proximity switch 24 v dc, ignition switch, starter, high pressure single sol valve, stop solenoid 24 v dc, solenoid coils, transmission solenoid valve 0501 209 692, oil seals for all, viper blade, fly wheel, engine gasket, filter element pp11329, slew hose, out rigger hose, pumps hose, steering hose, brakes hose, derric cylinder hyd hose, o rings for all types, wire rope, main control valve, out rigger valve, slew valve, pressure relief valve, hp filters, pressure reducing valve, pressure modulating valve, joy stick, in line check valve, glass fuse 8a, 10a, 25a, & 15a, main hyd pump, thrusters for each size, master controller with switching assembly, two-way roller limit switch both types speedo, & siemens, drive panel card, load cells, pa communication, bearing for gear box, breakers for all ratings, drive contactors, main pully & load cell pulley, luffing drive motor, travel motors, miniature relay 4c/o, 110v ac 6a, panel illumination lamps 11w, 230v, 6" panel cooling fan, encoder card in hoist panel, channel relay board, power contractor f model tesys series 3p ac 3, - phase 440v 330a, panel space heater, thermostat 30-85deg, thermal overload relay for motor 5.5 8a class, 10, anemometer set, can tap and its adaptor, 8 channel relay board, control card for atv71>90 kw and <90 kw, aviation lamp, lt rotating lamps, relays, flood light assembly, phoneix relay, main relay (solid state relay), fuse, deep sea controller, 12v battery, battery switch, diode assembly, avr.
|
Value :
INR 1.60 Cr
*
|
INR 16 Mn
*
|
Due Date :
37 Days to go
|
03/03/2021
|
|
TID :42461716
Multi State
|
|
|
|
|
|
|
|
|
|
7. Sector : Roads
Supply of cat a spares for dozer bd-50 a15 make-beml ccc0107020 , clamp, ces0112420, 070501001000 / 560800130000 , light switch, cek0110000 , key switch starting, 130ip91037, 5052000000102 , tacho hour meter, cln0110675 , fitting grease, 110ad11429 , pin cotter, cel2042463 , lamp indicator charge, 110fg 12159 , nut plate, cfs01 21235 , screw, 985zz14255 , cap assy (vandilism cap), 125fl91006, 125fl91100 / 1410414140 , valve drain and shut off / valve assy, 110fl11062, 1350412111 , gauge fuel level, chh2200627 , hose fuel, 110fl91237 , strainer, ccc0107012, 080202012100 , clamp, ccc0101203 , hose clip, 110ec61216 , hose, 110ec61249 , hose, cef0200200 , fuse 20 amp, 110eg02104, 310800021400 , head lamp assy, 110eg91221, 116eg91235 , cable tachometer (bd50 only), ces0520000 , battery relay, 110ec61257 , tube, 71001503040, 071000502000 / 71001501000 , ammeter, 130ip81082, 070603000000 , dash lamp, cel2042402 / , 360ip91119 / 610800030001 , warning lamp f/1055 s/23, 130ip91012 , lub oil pressure gauge, 125eg61045 , hose assy pressure, cel2042412 , lamp indicator ewt, 110mc91144 , seal oil, 110mc02019, 1311011110 , disc main clutch, 110mc11359, 1311011120 , plate main clutch, 110mc21962, 1411013120 , lining brake, cfr0600408, 0441200408 , rivet, 110sk01014, 1311405010 , transmission service kit, 110tm71128 , gasket gear box, ccp0421200 , cap anti, cbn0103020, 0612003020 , needle bearing, 110tm11203, 1311442710 , seat, 110tm61213, 1311442720 , boot, 110sk01039, 1312705210 , final drive service kit, cfw0111030, 01602-11030 , washer spring, chs0710090 , seal oil, 110fd31137, 1312742130 , sprocket, 1302700020, 1953000302 , floating seal (small assy), cfb0121255 , bolt, cbb0107217 , bearing, 110cs02003, 1312143210 , disc clutch driven, 110cs11287, 1302211320 , plate clutch drive, 110sk01022, 1312105020 , steering clutch service kit, 110br91295, 1313341270 , lining, cfr0600410, 0441200410 , rivet, 140701000200 , bearing needle, 1300913710 , bearing ball, 110sk01055 , steering case cover s/kit, 1300914250, 110co91848 , bearing needle, 110tf11363, 1503013520 , plug grease discharge, 140701080000 , seal bearing, 110tf02137, 1413016103 , single flange track roller assy, cln0110000 , fitting grease, 110tf11371, 1413014270 , retainer oil seal, cfs0131230, 01010-31230 , bolt/screw (sl-13, 41), 110ct01001, 1303201000 , track shoe assy single grouser type, cfb0222010, 0104922010 , bolt, 110fg12045 , clamp, 110fg02293 , cover assy, 110fg02285 , exhaust pipe, cfs0131235, 0104031235 , screw, 110cv00019 , hyd sys s/kit, cff0100045, 1306013260 , strainer, chh3003210 , hose, 110 hs 91608, 1306048140 , element, 110hc01013, 100603000001 , hyd. cyl assy rh, cfb0222440 / 0104162445 , 040102272500 , bolt, 110ad11104, 102200002830 , edge cutting, 110ad11112, 102200002930 , edge cutting, 130ad51049, 1407011180 , bit end rh, bfb3511205, 0209101205 / 10220000 , bolt, bfb3511270 , 0209001270 / 10220000 , bolt cutting edge, cfn4311219, 0229001219 / 102200001421 , nut, 110ad02073, 1307000082 , lower arm assy, cfs0132045, 01040-32045 , bolt, cfw0112060, 0160202060 , washer spring , 110ad11437 , pin, 110ad11412 , pin, 110ad02081 , joint, 110c002414 , cable, 110tf91246, 1413014190 , m kit seal/gasket cylinder, 110tf93069 , seal oil, 110tf11411 , bolt, cfn0411815 , nut, 110tf03206, 11tf03206 , cylinder lh&rh, cfw0111854 , washer spring, cfs0131640 , screw, cfs0131225, 040102640500 , bolt, 110tf91732 , ring seal, 110tf61762 , o ring, cfs0131025, 0104031025 , bolt, cfp02 10622 , pin, cfp02 10618 , pin, 110ec 61281 , hose.
|
Value :
INR 21.50 Lac
*
|
INR 2.15 Mn
*
|
Due Date :
14 Days to go
|
08/02/2021
|
|
TID :42413408
Assam
|
|
|
|
|
|
9. Sector : Canal/Irrigation Work
Supply and delivery of goods, cement, rsb, tie wire, nails common wire, plywood phenolic, nylon string, hose level, gallon empty, hacksaw blade, trapal plastic laminated, gi sheet, nail umbrella, drum plastic empty, chain, pad lock, etc for san jose cis cy2020 lot 1.
|
Value :
PHP 20.34 Lac
*
|
PHP 2.03 Mn
*
|
Due Date :
7 Days to go
|
01/02/2021
|
|
TID :42358766
Philippines
|
|
|
|
|