|
|
|
|
5. Sector : Coal and Lignite
Supply of spares - switch pressure, valve safety 190 p.s.i. h.p.un, air filter w/shut off valve, filter airline with automatic, filter air line, lubricator air line, tube nylon 12 o/d x 2150 long, valve quick exhaust, regulator air pressure with ga, ball valve 1/2" bsp, prep air modular combination, pre air combination unit, bushing,split steel, bushing ecentric steel, bushing split, coller half, coller half, bishing eccentric, plate 1, 46 screw, meter, srb (hoist/drag motor), srb (hoist/drag generator), fan 38 inch, fan 30 inch, fan 19 inch, brush seating stone, wedge socket, link drag chain, drag socket shackle, hitch shackle, pin, pin, hitch shackle, centre pin, link bush, trunion link, dump socket, bush, shackle bushing, spreader bar, lower hoist chain, upper hoist chain, swivel tube, casting socket, block rubbing, rack stud, stud rack segment, bolt hex m36, drum flange stud, bolt barrel, bolt barrel 50 dia.x 251 long, bolt holding down, link bush, bush, plate top seal, rope clamp bar drag, clamp rope (for 60mm dia rope), clamp rope (for 70mm dia rope), split locating collar, pedestal bolt, assembly welded gate (r.h.), shaft input pinion, oil seal housing, leg link, spray lance assembly, lock nut m64, pin pulley, pin pulley, hinge pin, retainer bearing, bearing retainer, roller, roller, rope restraining, fairlead roller spigot, spigot fairlead roller, drag pulley, pulley spacer, keep plate spacer, spacer bearing, spacer, bearing spacer, spacer, spacer, bearing spacer, shear block, stud assembly, stud assembly, bolt hex head m12x40 lg., bolt hex head m16 x 55 lg., bolt hex.hd.m20 x 80 long, bolt m24x90 long, bolt hex head m24 x 100 long, bolt hex.hd.m20 x 180 long, m20 bolt x 200 lg, bolt hex m30x3.5x350 long, special bolt c/w nut and l.w, large `d shackle, wrench motor coupling bolt, block rubber, washer m20 spring, washer spring m24, washer spring m36, washer spring m42, nut hex full m20x2.5, nut full m24, nut m36 x 4 hex, nut hex m42, hex nut m48, nut lock m42 x 4.5, nut m56x5.5, nut m64, nut self locking, seal, seal split oil, setscrew m24x3 hex head 150 lo, rubber, frame, valve assy, cage block, flange bolt, 1st reduction gear wheel, brake lining, retaing plate, diaphragm, bolt m20x90 long, locknut m48x5, oil seal, screw m20 2.5 x 50 for 24/96 dragline
|
Value :
INR 5.03 Cr
*
|
INR 50.34 Mn
*
|
Due Date :
21 Days to go
|
08/02/2021
|
TID :42373754
Madhya Pradesh
|
|
|
6. Sector : Computer Hardwares and Consumables
Overall maintenances and operation of non-it equipments installed, ac, novec/extinguisher addressable, fire detection/fire panel/fire suppression system/pa system/wld/rrs, fixtures, wiring, panels (ht & lt) etc., ups, dg, pdu, painting/furniture, ceiling, false flooring, battery bank wires/battery breaker/fuse, amf, sync panel, transformers/isolation transformer, rmu, cables/bbt, wires / conduit, pac, cac, change over, access control, distribution board, switch board/ipdu, earthing, ducting, grills, diffusers, dampers, ac piping & insulation, pac auto change over switch, modular furniture, cold aisle containment system row -1 (sr1 to sr72+ 10nr), start & end roof element 800x1200 stable roof elements, center roof element 600x1200 , door element 1200w x 2100h, server racks/cold aisle, ibms system/dcim/automation server/sensors/dcim switch at datacenter rsdc p-1, p-2 and p-3.
|
Value :
INR 5 Cr
*
|
INR 50 Mn
*
|
Due Date :
10 Days to go
|
28/01/2021
|
TID :42302488
Rajasthan
|
|
|
|
8. Sector : Railway Ancillaries
Supply, installation testing and commissioning of signalling equipments for re-alignment of curves in connection with raising of speed to 160 kmph in nad - mtj section of kota division on west central railway. supply, installation testing and commissioning of signalling equipments for re-alignment of curves in connection with raising of speed to 160 kmph in nad - mtj section of kota division on west central railway. to the president of india acting through the dy.cste/project/kota west central railway 1. i/we _have read the various conditions to tender attached hereto and agree to abide by the said conditions. i/we also agree to keep this tender open for acceptance for a period of 45 days from the date fixed for opening the same and in default thereof, i/we will be liable for forfeiture of my/our earnest money. i/we offer to do the work for west central railway, at the rates quoted in the attached schedule and hereby bind myself/ourselves to complete the work in all respects within 10 months from the date of issue of letter of acceptance of the tender. 2.i/we also hereby agree to abide by the indian railways standard general conditions of contract, with all correction slips up- to-date and to carry out the work according to the special conditions of contract and specifications of materials and works as laid down by railway in ect/2020/06 name of work supply, installation testing and commissioning of signalling equipments for re-alignment of curves in connection with raising of speed to 160 kmph in nad - mtj section of kota division on west central railway. 1.(i) the rates quoted in the offer by the tenderer will be inclusive of basic cost, excise duty, sales tax, inter state tax, vat, works contract tax, service tax transport, loading, unloading charge, labour charges etc., wherever leviable octroi exemption certificates and any other statutory duties shall be issued by the railway in the name of contractor only, subject to this being permissible under prevailing relevant rules. however no additional payment is admissible in case the exemption certificates are not honored by concerned authorities. the price quoted should be firm and no price variation clause will be acceptable. (ii) all the bidders/ tenderers should ensure that they are gst compliant and their quoted tax structures/ rates are as per gst law. 2.method of quoting of rates (i)estimated rates for each item of schedule have already been indicated by railways in the tender
|
Value :
INR 1.86 Cr
*
|
INR 18.60 Mn
*
|
Due Date :
16 Days to go
|
03/02/2021
|
TID :42383596
Multi State
|
|
|
|
10. Sector : Power Plant
Procurement of spares, filter bags, bag filter cage, blow pipe with nozzles, pulse jet valve with pilot, pipe, main door gasket, d.p. arrangement, manual valve 20 nb, check valve 20 nb, differential pressure switch, pressure gauge, wire breaded hose with clamps (40 nb), transfer hopper, fluidizing tiles, vent valve assembly, surge hopper, pneumatic ball valve, 3 way single quail solenoid valve, spring loaded check valve/ diaphragm valve, hose and connector, bend, butter fly valve with actuator 300 nb, gi pipes & fittings, gi nipple, gi union etc for re commissioning of stand by stream of fly ash disposal system of unit no 1 to 4 for ahp i and ii sgtps mppgcl.
|
Value :
1.79 Cr
*
|
17.93 Mn
*
|
Due Date :
9 Days to go
|
27/01/2021
|
TID :41773614
Madhya Pradesh
|
|
|