1. Sector : Business Consultancy
Procurement, supply and commissioning of 04 nos. heavy duty direct circulation rotary rigs of 500 meter well construction capacity drill pipes of nc 50 tool joints (4½” if) of size 127mm (5”), external upset, grade e. range one 6.1 m (20 feet) long, weight 24.7 kg/m with steel thread protectors., drill pipes 88.9 mm (3.5 in), nc 38 if tool joints, external upset, grade e, ranqe one 6.1 m (20 feet) lonq, weight 19.8 kg/m with steel thread protectors., triple sheave travelling block with single latching hook, capacity not less than 500 kn, 152 mm (6 in) x 7.50 m (25 ft) long suction hose with fittings, strainer, and foot valve, 76.2 mm (3 in) x 10 m (33 ft) long high pressure wire braided swivel hose complete with fittings and mud mixing gun., drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 203.2 mm x 6.1m (8 in x 20 ft), 167.3 mm (6-5/8 in) rh reg threads with steel thread protectors, drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 158.8 mm x 6.1m (6-1/4 in x 20 ft), 88.9 mm (4½ in) rh reg threads with steel thread protectors, kelly saver sub box to pin (4½" if) made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 (each size drill pipe - 2 nos), box (4½” if rh) to pin (3½ if rh) sub for kelly saver to 88.9mm drill pipe, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75cm., box (4 ½” if rh) to pin (4½” if rh)sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75m., box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (4½” reg rh) to box (4½" reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (6 5/8” reg rh) to box (6 5/8” reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (4½” if rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, sub for attaching fishing tools (si. no 79 to 87) with 88.9mm drill pipe (one set will contain two number of subs for each different size to fishing tools joints), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½" reg rh connection) x box (4 ½” reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (6 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (7 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box 3 ½” if, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box 6 5/8” reg rh connection to box ( 6 5/8" reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box (7 5/8" reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, pin (4 ½” regular rh connection) to box (3 ½” if rh connection), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 sub, box (4 ½” if connection) to box (4 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½” if connection) to box (3 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3 ½” if connection) to box (3 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, any other size sub required for forming drill string, and shall be made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, type c rotary tong, 60.3 mm x 273 mm (2-3/8 in x 10-3/4 in), com...
|
Value :
INR 38.13 Cr
*
|
INR 381.35 Mn
*
|
Due Date :
4 Days to go
|
27/01/2021
|
TID :42170570
Delhi
|
|
|
2. Sector : Coal and Lignite
Supply of spares - switch pressure, valve safety 190 p.s.i. h.p.un, air filter w/shut off valve, filter airline with automatic, filter air line, lubricator air line, tube nylon 12 o/d x 2150 long, valve quick exhaust, regulator air pressure with ga, ball valve 1/2" bsp, prep air modular combination, pre air combination unit, bushing,split steel, bushing ecentric steel, bushing split, coller half, coller half, bishing eccentric, plate 1, 46 screw, meter, srb (hoist/drag motor), srb (hoist/drag generator), fan 38 inch, fan 30 inch, fan 19 inch, brush seating stone, wedge socket, link drag chain, drag socket shackle, hitch shackle, pin, pin, hitch shackle, centre pin, link bush, trunion link, dump socket, bush, shackle bushing, spreader bar, lower hoist chain, upper hoist chain, swivel tube, casting socket, block rubbing, rack stud, stud rack segment, bolt hex m36, drum flange stud, bolt barrel, bolt barrel 50 dia.x 251 long, bolt holding down, link bush, bush, plate top seal, rope clamp bar drag, clamp rope (for 60mm dia rope), clamp rope (for 70mm dia rope), split locating collar, pedestal bolt, assembly welded gate (r.h.), shaft input pinion, oil seal housing, leg link, spray lance assembly, lock nut m64, pin pulley, pin pulley, hinge pin, retainer bearing, bearing retainer, roller, roller, rope restraining, fairlead roller spigot, spigot fairlead roller, drag pulley, pulley spacer, keep plate spacer, spacer bearing, spacer, bearing spacer, spacer, spacer, bearing spacer, shear block, stud assembly, stud assembly, bolt hex head m12x40 lg., bolt hex head m16 x 55 lg., bolt hex.hd.m20 x 80 long, bolt m24x90 long, bolt hex head m24 x 100 long, bolt hex.hd.m20 x 180 long, m20 bolt x 200 lg, bolt hex m30x3.5x350 long, special bolt c/w nut and l.w, large `d shackle, wrench motor coupling bolt, block rubber, washer m20 spring, washer spring m24, washer spring m36, washer spring m42, nut hex full m20x2.5, nut full m24, nut m36 x 4 hex, nut hex m42, hex nut m48, nut lock m42 x 4.5, nut m56x5.5, nut m64, nut self locking, seal, seal split oil, setscrew m24x3 hex head 150 lo, rubber, frame, valve assy, cage block, flange bolt, 1st reduction gear wheel, brake lining, retaing plate, diaphragm, bolt m20x90 long, locknut m48x5, oil seal, screw m20 2.5 x 50 for 24/96 dragline
|
Value :
INR 5.03 Cr
*
|
INR 50.34 Mn
*
|
Due Date :
16 Days to go
|
08/02/2021
|
TID :42373754
Madhya Pradesh
|
|
|
3. Sector : Water Storage and Supply
Design, drawing, fabrication, supply, transportation, erection, testing and commissioning of 11 nos. CR gate at ba/idonwa chowk in kadane river and h.r gates at three site of left embankment in kadane river at ramnagar i c/s glr/s (512e-1.31 m 01.98 m-4 nos.), ram nagar ii xis & c/s(size-1.52 m x1.52 m-4 nos.) and bhartipur r/s (size-1.83 m x 1.83 m-02 nos.) with their hoisting system,platform and approach !adder in sakra block. (design discharge-203.00 cumec,bottom seal level- ,h.f.l-46.55 m,operating platform level-,discharge of left canal-1.077 cumec). Hindi
|
Value :
INR 1.89 Cr
*
|
INR 18.90 Mn
*
|
Due Date :
5 Days to go
|
28/01/2021
|
TID :42355737
Bihar
|
|
|
4. Sector : Shipping
Supply of spares for cargo handling equipments in kmtt, project, myanmar, tyres, tube & rims set, engine service kit (including lube oil & fuel filters), radiator, control valve assembly 36812775, starter, alternator, temperature sensor 36812113, oil seals for all types, solenoid valve assembly, gaskets, o rings sets, main control lever, lift cylinder, oil pressure sensor unit, limit switch assembly, engine stop solenoid, ignition switch, battery 12v, 80ah, fuse 15a & 20a, cylinder liner, fan belt, lube oil pump, bearing for all brake shaft, thrust bearing, pinion shaft, front and rear, brake shoe assembly, hydraulic hoses for all types, chain assembly, front tyres, tube & rime set, rear tyre tube &rim set, battery, starter, alternator, clutch plates, brake linings, fuses (all rating used), bulbs (head light, blinkers & rear lamp) each, drive belts, turbo charger, fuel injection pump, radiator assembly, hydraulic pump, thermostat, hour meter, hydraulic hoses, rims, tyres and its tube set, bearings (inner & outer), brake & lever assembly, tyres, tube & rims set, alternator, relays 24v, fuse for all rating each, load cell assembly, direction sensor 161-007-00, potentiometer assembly 161-023-03, battery 12v,, proximity switch 24 v dc, ignition switch, starter, high pressure single sol valve, stop solenoid 24 v dc, solenoid coils, transmission solenoid valve 0501 209 692, oil seals for all, viper blade, fly wheel, engine gasket, filter element pp11329, slew hose, out rigger hose, pumps hose, steering hose, brakes hose, derric cylinder hyd hose, o rings for all types, wire rope, main control valve, out rigger valve, slew valve, pressure relief valve, hp filters, pressure reducing valve, pressure modulating valve, joy stick, in line check valve, glass fuse 8a, 10a, 25a, & 15a, main hyd pump, thrusters for each size, master controller with switching assembly, two-way roller limit switch both types speedo, & siemens, drive panel card, load cells, pa communication, bearing for gear box, breakers for all ratings, drive contactors, main pully & load cell pulley, luffing drive motor, travel motors, miniature relay 4c/o, 110v ac 6a, panel illumination lamps 11w, 230v, 6" panel cooling fan, encoder card in hoist panel, channel relay board, power contractor f model tesys series 3p ac 3, - phase 440v 330a, panel space heater, thermostat 30-85deg, thermal overload relay for motor 5.5 8a class, 10, anemometer set, can tap and its adaptor, 8 channel relay board, control card for atv71>90 kw and <90 kw, aviation lamp, lt rotating lamps, relays, flood light assembly, phoneix relay, main relay (solid state relay), fuse, deep sea controller, 12v battery, battery switch, diode assembly, avr.
|
Value :
INR 1.60 Cr
*
|
INR 16 Mn
*
|
Due Date :
39 Days to go
|
03/03/2021
|
TID :42461716
Multi State
|
|
|
|
|
|
|
|
|