|
1. Sector : Non Classified
Plumbing Material
|
Value :
RSD 250 Cr
*
|
RSD 2.50 Bn
*
|
Due Date :
14 Days to go
|
10/10/2023
|
|
TID :64466865
Serbia
|
|
|
|
|
|
|
|
|
5. Sector : Security Services
Supply of Cement Begs, S Tripper, Aggregate Tripper, Labor, Plinth Retaining Wall Providing Laying of retaining wall, Flooring PPC Flooring, Tiling, Brick Work Providing laying cement brick masonry, Internal Plaster 12by15 mm thick cement plaster, External Plaster Providing applying 18 mm, Roof Providing weilding onsite Iron Beam Structure, False Ceiling Providing fixing of False Ceiling, Wash Basin, Toilet Seat, Door, Exhuast with Fitting, Accessories with Fitting, Plumbing Work, Water Tank 500Ltr with Fitting, Load Carrier Logistices
Qty 971
|
Value :
INR 50 Lac
*
|
INR 5 Mn
*
|
Due Date :
3 Days to go
|
29/09/2023
|
|
TID :64578792
Jammu-kashmir
|
|
|
6. Sector : Municipal Corporations
Supply, Fitting, Fixing of non schedule items for Construction of Auditorium Cum Cultural Center, At-Kuchinda NAC
FRP DOOR FRAME, Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., FRP DOOR SHUTTER, Supplying fitting, fixing Factory made single leaf rigid FRP sandwich composite Door/Window shutter (alternately GRP) of 32 mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised isopathalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) mpregnate with orthopthalic polysterskin. The thickness of the skins shall not be less than 1.5 mm Expanded polystyone(EPS) structural foam panel of 29 mm thickness and a density of 20 kg/cu.mtr shall be used as core material. Wooded reinforcement made of seaoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinfocements for fitting the metal fittings such as tower bolt, aldrop. Hanles, etc. shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material. The material and process for mariufacturing the door shutters shall be conform to RV- TIFAC composite design Center's standards and specifications and the door shutters tested in conforming to IS 4020-1998. The finish door shutter will be plain colour as per specification and diection of Engineer-In Charge. (Ground Floor), WOODEN FLOORING., Providing and laying in position 12 mm thick Engineered Hardwood Flooring of make Xylos Walnut shade having dimension 12*1210 mm*125 mm having smart lock tongue and groove joints to secure long lasting joint. The material comprising of three layers, Top Layer is of genuine hardwood surface, the middle layer is of pine or spruce ribs laid transversely and the third layer is stabilizing bottom layer. The Floor is finished on top with seven course of UV curved formaldehyde free lacquer. The planks are installed on foam and polythene sheet on top of the under floor and stuck to one another using adhesive in the groove of the board all complete including all accessories (Skirting, Profile) etc., Gyp Board Ceilling, Providing and fixing False ceiling as per Saint Gobain Specifications made of standard G.I. Sections and 12mm thick gyp board sheets inclusive of all hangers, edge members and other clips complete, with sheets fixed with proper Philip fastner by power drills and joints duly finished ensuring level in line, complete with putty, primer and painting of approved make and colour. Cost includes cutouts for electrical fittings, materials, labour, T&P etc complete as per direction of the Engineer-in-charge. (Basic Rate of Gypsum Board 12mm thk. Rs.303/ sheet). , GRID CEILING WITH ANUTONE SUBTEX NUBBY STEP EDGE , Supply and Installation of Anutone 15 mm glassfiber steppe edge Glass fibre core ceiling tile of size 595 x 595 x 15mm having all edges encapsulated with chemical treated paint & having density 100-120 Kgs/ m3, weight 1.5 - 3.0 kg/m2 which is suspended by using 0.3mm thick and 15 mm wide pre coated metal T15/24 grid system. The technical parameters are as follows Core - Glassfibre, Fire – Class 1 & P , Acoustics – NRC 0.95, Climate (OC RH) – 40, 95, Termite resistance , Light reflectance – 85 %, Green (RC %) – 35, Hygiene (VoC, Clean room) – Low, Class 3 Strength, Load capacity (Kg) - Antisag. The T15/24 Grid system of 600 x 600 mm module shall include wall angle(WA15) with unequal flanges of size 14 x 20 x3000mm wide, length 3000mm, 0.43 mm thick fixed along the perimeter of wall with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the Main T15(MT15W36) having flange width 15mm /24 mm , height 32/38 mm and length 3600mm thickness 0.30 mm from the soffit with help of soffit cleat and wire at 1200mm c/c. Cross T15 (CT15W12) with flange width 15 mm, height 32 mm and length 1200 mm is then interlocked into the pre-cut slots in the Main T15 at 600mm centers in the direction perpendicular to the Main T15. Finally Cross T15 (CT15W06) having flange width 15 mm, height 32mm and length 600mm are then interlocked into the pre cut slots in the 1200 mm Cross T15 at 1200mm centers and in direction parallel to the Main T15. Anuton Subtex Nubby steppe edge of size 595 x 595 x 15mm thick shall be placed into the grid size of 600 x 600 mm. Ensure arrow marks behind subtex panels are orianted in one direction to achieve uniform shade. Test certificate will be submmited after procurement of materials. , CEILING - CEILING WITH WOODEN SLAT HDF PLANK - Anutone or equivalet.,...
|
Value :
INR 42.81 Lac
*
|
INR 4.28 Mn
*
|
Due Date :
Closing today
|
26/09/2023
|
|
TID :64534786
Orissa (Odisha)
|
|
|
|
|
|
8. Sector : Non Classified
Supply Of Medical Supplies .
|
Value :
EUR 17.95 Lac
*
|
EUR 1.79 Mn
*
|
Due Date :
Closing today
|
26/09/2023
|
|
TID :63958461
Kazakhstan
|
|
|
9. Sector : Municipal Corporations
Supply of brick, brick gitti, rod, cement, sand, cycle riksahw, e-rikshaw, pa system, rcc gitti, pillar, fencing net, iron gate, iron door, hume pipe, pvc pipe, elbow, sanitary fitting, plumbing items, hand pump material, paint, electrical items, plastic bank etc for village panchayat Saray lilaghar urf barchanpur.
Hindi image
|
Value :
INR 11.12 Lac
*
|
INR 1.11 Mn
*
|
Due Date :
7 Days to go
|
03/10/2023
|
|
TID :64600183
Uttar Pradesh
|
|
|
|
10. Sector : Other Services
Supply Of Carpentry Goods.
|
Value :
BDT 10.51 Lac
*
|
BDT 1.05 Mn
*
|
Due Date :
23 Days to go
|
19/10/2023
|
|
TID :64631726
Bangladesh
|
|
|