1. Sector : Business Consultancy
Procurement, supply and commissioning of 04 nos. heavy duty direct circulation rotary rigs of 500 meter well construction capacity drill pipes of nc 50 tool joints (4½” if) of size 127mm (5”), external upset, grade e. range one 6.1 m (20 feet) long, weight 24.7 kg/m with steel thread protectors., drill pipes 88.9 mm (3.5 in), nc 38 if tool joints, external upset, grade e, ranqe one 6.1 m (20 feet) lonq, weight 19.8 kg/m with steel thread protectors., triple sheave travelling block with single latching hook, capacity not less than 500 kn, 152 mm (6 in) x 7.50 m (25 ft) long suction hose with fittings, strainer, and foot valve, 76.2 mm (3 in) x 10 m (33 ft) long high pressure wire braided swivel hose complete with fittings and mud mixing gun., drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 203.2 mm x 6.1m (8 in x 20 ft), 167.3 mm (6-5/8 in) rh reg threads with steel thread protectors, drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 158.8 mm x 6.1m (6-1/4 in x 20 ft), 88.9 mm (4½ in) rh reg threads with steel thread protectors, kelly saver sub box to pin (4½" if) made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 (each size drill pipe - 2 nos), box (4½” if rh) to pin (3½ if rh) sub for kelly saver to 88.9mm drill pipe, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75cm., box (4 ½” if rh) to pin (4½” if rh)sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75m., box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (4½” reg rh) to box (4½" reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (6 5/8” reg rh) to box (6 5/8” reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (4½” if rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, sub for attaching fishing tools (si. no 79 to 87) with 88.9mm drill pipe (one set will contain two number of subs for each different size to fishing tools joints), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½" reg rh connection) x box (4 ½” reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (6 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (7 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box 3 ½” if, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box 6 5/8” reg rh connection to box ( 6 5/8" reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box (7 5/8" reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, pin (4 ½” regular rh connection) to box (3 ½” if rh connection), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 sub, box (4 ½” if connection) to box (4 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½” if connection) to box (3 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3 ½” if connection) to box (3 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, any other size sub required for forming drill string, and shall be made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, type c rotary tong, 60.3 mm x 273 mm (2-3/8 in x 10-3/4 in), com...
|
Value :
INR 38.13 Cr
*
|
INR 381.35 Mn
*
|
Due Date :
10 Days to go
|
27/01/2021
|
TID :42170570
Delhi
|
|
|
2. Sector : Coal and Lignite
Supply of spares - switch pressure, valve safety 190 p.s.i. h.p.un, air filter w/shut off valve, filter airline with automatic, filter air line, lubricator air line, tube nylon 12 o/d x 2150 long, valve quick exhaust, regulator air pressure with ga, ball valve 1/2" bsp, prep air modular combination, pre air combination unit, bushing,split steel, bushing ecentric steel, bushing split, coller half, coller half, bishing eccentric, plate 1, 46 screw, meter, srb (hoist/drag motor), srb (hoist/drag generator), fan 38 inch, fan 30 inch, fan 19 inch, brush seating stone, wedge socket, link drag chain, drag socket shackle, hitch shackle, pin, pin, hitch shackle, centre pin, link bush, trunion link, dump socket, bush, shackle bushing, spreader bar, lower hoist chain, upper hoist chain, swivel tube, casting socket, block rubbing, rack stud, stud rack segment, bolt hex m36, drum flange stud, bolt barrel, bolt barrel 50 dia.x 251 long, bolt holding down, link bush, bush, plate top seal, rope clamp bar drag, clamp rope (for 60mm dia rope), clamp rope (for 70mm dia rope), split locating collar, pedestal bolt, assembly welded gate (r.h.), shaft input pinion, oil seal housing, leg link, spray lance assembly, lock nut m64, pin pulley, pin pulley, hinge pin, retainer bearing, bearing retainer, roller, roller, rope restraining, fairlead roller spigot, spigot fairlead roller, drag pulley, pulley spacer, keep plate spacer, spacer bearing, spacer, bearing spacer, spacer, spacer, bearing spacer, shear block, stud assembly, stud assembly, bolt hex head m12x40 lg., bolt hex head m16 x 55 lg., bolt hex.hd.m20 x 80 long, bolt m24x90 long, bolt hex head m24 x 100 long, bolt hex.hd.m20 x 180 long, m20 bolt x 200 lg, bolt hex m30x3.5x350 long, special bolt c/w nut and l.w, large `d shackle, wrench motor coupling bolt, block rubber, washer m20 spring, washer spring m24, washer spring m36, washer spring m42, nut hex full m20x2.5, nut full m24, nut m36 x 4 hex, nut hex m42, hex nut m48, nut lock m42 x 4.5, nut m56x5.5, nut m64, nut self locking, seal, seal split oil, setscrew m24x3 hex head 150 lo, rubber, frame, valve assy, cage block, flange bolt, 1st reduction gear wheel, brake lining, retaing plate, diaphragm, bolt m20x90 long, locknut m48x5, oil seal, screw m20 2.5 x 50 for 24/96 dragline
|
Value :
INR 5.03 Cr
*
|
INR 50.34 Mn
*
|
Due Date :
22 Days to go
|
08/02/2021
|
TID :42373754
Madhya Pradesh
|
|
|
3. Sector : Power Plant
Procurement of spares, wedge ring, dum ring, hub plate, grinding table hub cover, grinding table upper ring thk- 20mm, lh sealing arrangement seal gasket, air seal gasket, backing metal, dust seal retainer, gasket(t=mm), seal plate thk-01mm, bottom liners, liner assembly, insulation cover plate, deflector p1, p2 & p3(hard chrome lined), ceramic tiles for deflector assembly of coal mill (mvm 32f) for sub categories (spares for grinding table assembly, lower housing assembly and middle housing assembly) at 2x660 mw, sstpp, mppgcl, dongalia.
|
Value :
INR 3.44 Cr
*
|
INR 34.43 Mn
*
|
Due Date :
3 Days to go
|
20/01/2021
|
TID :42202960
Madhya Pradesh
|
|
|
4. Sector : Water Storage and Supply
Design, drawing, fabrication, supply, transportation, erection, testing and commissioning of 11 nos. CR gate at ba/idonwa chowk in kadane river and h.r gates at three site of left embankment in kadane river at ramnagar i c/s glr/s (512e-1.31 m 01.98 m-4 nos.), ram nagar ii xis & c/s(size-1.52 m x1.52 m-4 nos.) and bhartipur r/s (size-1.83 m x 1.83 m-02 nos.) with their hoisting system,platform and approach !adder in sakra block. (design discharge-203.00 cumec,bottom seal level- ,h.f.l-46.55 m,operating platform level-,discharge of left canal-1.077 cumec). Hindi
|
Value :
INR 1.89 Cr
*
|
INR 18.90 Mn
*
|
Due Date :
11 Days to go
|
28/01/2021
|
TID :42355737
Bihar
|
|
|
|
|
|
8. Sector : Coal and Lignite
Supply of lhd spares, backup ring eea0021738, o ring 12wl4189653a, backup ring 12wl4189654a, o ring eea0021751, seal kit eea0020991, seal kit eea0020978, seal kit eea0020994, o ring eea0021697, seal kit eea0020815, piston eea0021737, piston eea0021741, piston rod s/a eea0024577, cover eea0021750, steering cylinder 811b050000201, twin cooler 811c050000102, brake valve 811b050000150, hex head bolt mbh150/170/140ab, spider assy 811a050000417, cable(steering valve) 412a000000228, filter assembly eea0001160, steering accumulator (4ltr) 811a050000191, accumulator (1ltr) 811a050000192, seal kit eea0009584, hydraulic pump 811b050000101, steering valve assy. 811m000002017, seal kit eea0009585, fr & rv output flange eea0011861, kit drive plate eea0010872, seal eea0010906, charging pump eea0010924, transmission repair kit eea0018039, lift cylinder 811b050000198, transmission 811050000116
|
Value :
INR 67.68 Lac
*
|
INR 6.76 Mn
*
|
Due Date :
2 Days to go
|
19/01/2021
|
TID :42155401
Orissa (Odisha)
|
|
|
9. Sector : Municipal Corporations
Supply of different stationary items "stationary items, plastic container for holding indelible ink small container with lid 14000 nos, steel pin 15 pcs.pouch 14000 nos, match box good quality 14000 nos, blade good quality 14000 nos, post it small 200 nos, post it big 100 nos, steel clip 3"" 200 nos, steel clip 4"" 200 nos, gems clip metal good quality 300 box, gems clip plastic coated good quality 200 box, fevi stick 8 gm 500 nos, fevi stick 15 gm 500 nos, scissors good quality 100 nos, plastic scale 12"" good quality 200 nos, eraser good quality 15000 nos, cello tape medium 15000 nos, wooden pencil good quality 15000 nos, wooden base wire good quality 15000 nos, bodkin(phorna) good quality, 12"" 15000 nos, gum big bottle (300 ml) 15000 bottle, chalk 30 pcs box 100 box, knife (6"" ordinary) good quality 100 nos, single punch good quality 200 nos, double punch good quality 100 nos, clip board good quality, a4 500 nos, blank envelop 11""x 5"" brown 10000 nos, blank envelop 11""x 5"" white 5000 nos, dendrite tube 10 ml 100 nos, fevi quick 0.5 gm 100 nos, blank cd 700 mb (50 pcs box) with jacket sony 100 box, blank dvd (50 pcs box) with jacket good quality 100 box, magnifying glass for low vision electors good quality 14000 nos, brown paper for packing art paper size 60 ream, pen drive 32 gb scandisk 100 nos, cloth pasted cover 21"" x 14"" 100 nos, calculator 10 digit good quality 100 nos, calculator ordinary 400 nos, marker pen all color, good quality 100 nos, sketch pen (black, blue, red) good quality (in packet) 100 packet, high lighter pen all color, good quality 200 nos, correction pen fabre castle 200 nos, ball pen use & throw all colors agni gell 60000 nos, rubber band (20 pcs packet) 20 pc in a packet 14000 packet, rubber band 2"" kg 10 kg, rubber band 4"" kg 10 kg, rubber band 6"" kg 10 kg, tag 1 bundle= 10 pc 15000 bundle, fourfold file cover good quality 15000 nos, file cover with flap good quality 2000 nos, plastic cover file good quality, a4 17000 nos, plastic channel file good quality, a4 300 nos, carbon paper a4, 100 pcs per pkt 300 packet, xerox paper a4, 75 gsm 500 ream, xerox paper a3, 75 gsm 100 ream, xerox paper legal, 75 gsm 100 ream, white paper dfs good quality 50 ream, white paper fs good quality 160 ream, sponge cup good quality 17000 nos, hard board (big) 6 inch x 4 inch 15000 nos, morteen coil good quality 100 nos, nail 1 bundle= 5 pc of 2.5"" nails 14000 bundle, needle good quality 14000 nos, sealing wax good quality 170000 nos, candle 8 inch 170000 nos, candle 10 inch 500 nos, markin cloth 1m x 1m 15000 nos, cloth duster 18"" x 18"" 45000 nos, clay paper weight 50 gms each 62000 nos, thread ball 1 ball=20 gram 15000 nos, thin twine thread 1 ball=20gm 20000 nos, sutli 1 ball=50 gram 14000 nos, lock & key small size, good quality 1000 nos, lock & key link 5 lever 500 nos, for the asg election 2021
|
Value :
INR 66.73 Lac
*
|
INR 6.67 Mn
*
|
Due Date :
5 Days to go
|
22/01/2021
|
TID :42282873
West Bengal
|
|
|
10. Sector : Coal and Lignite
Procurement of spares for tata hitachi hydraulic shovels working - o ring, seal oil, seal kit (bc), arm cyl. kit, ring wear, ring backup, packing u ring, hose, hose rubber, coupling,
|
Value :
INR 43.79 Lac
*
|
INR 4.37 Mn
*
|
Due Date :
1 Day to go
|
18/01/2021
|
TID :42318233
Madhya Pradesh
|
|
|