1. Sector : Road Transport Services
procurement of tyre, tube & flap sets, tubeless radial tyres and additional tube & flaps, pre-cured tread rubber & allied materials, rubber glazing with inserts (epdm rubber), automotive bulbs, mechanical jacks, hydraulic jacks & wheel spanners with tommy bar, tyre & tube patches, window flock nylon epdm rubber channel, papers & boards, office stationery items, binding materials, balata packing, plates, inks, blankets & chemicals, spring leaves, u bolts, centre bolts and spring clamps. * supply, installation and commissioning of plant & machinery & hydraulic press brake 100 ton capacity & hd 3 phase test bench for testing alternator- starter on turnkey basis.
|
Value :
INR 90 Cr
*
|
INR 900 Mn
*
|
Due Date :
1 Day ago
|
27/01/2021
|
TID :42132659
Karnataka
|
|
|
2. Sector : Business Consultancy
Procurement, supply and commissioning of 04 nos. heavy duty direct circulation rotary rigs of 500 meter well construction capacity drill pipes of nc 50 tool joints (4½” if) of size 127mm (5”), external upset, grade e. range one 6.1 m (20 feet) long, weight 24.7 kg/m with steel thread protectors., drill pipes 88.9 mm (3.5 in), nc 38 if tool joints, external upset, grade e, ranqe one 6.1 m (20 feet) lonq, weight 19.8 kg/m with steel thread protectors., triple sheave travelling block with single latching hook, capacity not less than 500 kn, 152 mm (6 in) x 7.50 m (25 ft) long suction hose with fittings, strainer, and foot valve, 76.2 mm (3 in) x 10 m (33 ft) long high pressure wire braided swivel hose complete with fittings and mud mixing gun., drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 203.2 mm x 6.1m (8 in x 20 ft), 167.3 mm (6-5/8 in) rh reg threads with steel thread protectors, drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 158.8 mm x 6.1m (6-1/4 in x 20 ft), 88.9 mm (4½ in) rh reg threads with steel thread protectors, kelly saver sub box to pin (4½" if) made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 (each size drill pipe - 2 nos), box (4½” if rh) to pin (3½ if rh) sub for kelly saver to 88.9mm drill pipe, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75cm., box (4 ½” if rh) to pin (4½” if rh)sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75m., box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (4½” reg rh) to box (4½" reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (6 5/8” reg rh) to box (6 5/8” reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (4½” if rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, sub for attaching fishing tools (si. no 79 to 87) with 88.9mm drill pipe (one set will contain two number of subs for each different size to fishing tools joints), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½" reg rh connection) x box (4 ½” reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (6 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (7 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box 3 ½” if, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box 6 5/8” reg rh connection to box ( 6 5/8" reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box (7 5/8" reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, pin (4 ½” regular rh connection) to box (3 ½” if rh connection), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 sub, box (4 ½” if connection) to box (4 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½” if connection) to box (3 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3 ½” if connection) to box (3 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, any other size sub required for forming drill string, and shall be made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, type c rotary tong, 60.3 mm x 273 mm (2-3/8 in x 10-3/4 in), com...
|
Value :
INR 38.13 Cr
*
|
INR 381.35 Mn
*
|
Due Date :
1 Day ago
|
27/01/2021
|
TID :42170570
Delhi
|
|
|
|
4. Sector : Roads
Quotation of cat b store - tow bar, tow chain, lci-d-253-a50 contractor ac350a, lci-d-253-a35 contractor ac335a, lci-d-253-a25 contractor ac325a, fuse link 63a, fuse link 6a, electronic timer, wheel spanner 30x32, filter opener wrench for heavy vehicle, filter opener wrench for light vehicle.
|
Value :
INR 78.15 K
*
|
INR 78.15 K
*
|
Due Date :
1 Day ago
|
27/01/2021
|
TID :42332395
Assam
|
|
|
5. Sector : Agro Products
Supply of bo items fix spanner 16 x 17, grease gun push type cap.120 gms., linch pin, split pin 1/8"x1 1/4", spring washer m16 flat., cartons for 800 ml juice cans, cartons for 480 gms can, cartons for tomato ketchup sachet, master pack carton for tomato ketchup sachet, carton for bilster pack, master pack carton for blister pack, cartons for jam jar, cartons for tomato ketchup, cartons for master pack mixed fruit jam , cartons for (air india) blister pack.
|
Value :
0
*
|
Refer Document
*
|
Due Date :
1 Day to go
|
29/01/2021
|
TID :42018485
Maharashtra
|
|
|
|
7. Sector : Education And Research Institute
Supply of accessories - "12.7 mm post holder with spring-loaded hex-locking thumbscrew , l=40 mm, 5 per pack, ", " 12.7 mm post holder with spring-loaded hex-locking thumbscrew , l=50 mm, 5 per pack", " 12.7 mm post holder with spring-loaded hex-locking thumbscrew , l=75 mm, 5 per pack", " 12.7 mm post holder with spring-loaded hex-locking thumbscrew , l=100 mm, 5 per pack", mounting base, 25mm x 58mm x 10mm, mounting base, 25mm x 75mm x 10mm, mounting base, 50mm x 75mm x 10mm, 31.8 mm studded pedestal base adapter, m6 thread, 5 pack, metric, clamping fork, 1.24 inch counter-board slot, universal, 5 pack, swivel base adapter - metric, 12.7mm stainless steel optical post, m4 stud, m6 tapped hole, l= 50mm, 12.7mm stainless steel optical post, m4 stud, m6 tapped hole, l= 30mm, 12.7mm stainless steel optical post, m4 stud, m6 tapped hole, l= 20mm, 12.7mm stainless steel optical post, m4 stud, m6 tapped hole, l= 75mm, 12.7mm stainless steel optical post, m4 stud, m6 tapped hole, l= 100mm, 12.7mm stainless steel optical post, m4 stud, m6 tapped hole, l= 150mm, slip-on post collar for 1/2" posts, metric m6 thumbscrew - metric, 5 per pack, right angle post clamp (metric) for ½ inch post, 5mm hex, 5 per pack, right-angle end clamp for 1/2" posts, m6 stud and 5 mm hex, 5 pack, swivel post clamp (metric), 360 degree continuously adjustable, 5 per pack, general purpose table clamp, l-shape, 5 pack , heavy-duty variable height clamp, m6 tapped, 5 pack, metric 1" lens mount with internal and external sm1 threads, m4 tap, rotation mount for 1" (25.4 mm) optics, m4 tap , rotation mount for 12.7mm (1/2") optics, metric, one sm05rr retaining ring included, 190-piece hex key kit, metric, spanner wrench with clear aperture for sm1 retaining rings , kinematic prism mount, 25.4 mm deep, m4 taps , large adjustable clamping arm, m4 threaded post, "heating components set for rubidium vapor cell, (i) vapor cell cap heater for 25mm glass cells, (ii) temperature controller, 120 vac with power cord, (iii) 6-pin, male-male hirose connector cable, 10 foot long", kinematic mirror mount for 1 inch optics, mounted standard iris, 12 mm max aperture, mounted standard iris, 25 mm max aperture, self-centering lens mount, 0.15" (3.8mm) to 1.7" (43mm), benchtop organizer with balldriver set and dropper bottles, metric, 25 mm square construction rail, 15" long, 1/4"-20 taps, 1" construction cube, three 1/4" (m6) counterbored holes, m6 x 1.0 low-profile channel screw, 10 mm long, 100 pack, magnetic beam height measurement tool, neutral density filter kit (25mm, sm1 mounted (350-1100nm) for opto-mechanics
|
Value :
0
*
|
Refer Document
*
|
Due Date :
1 Day ago
|
27/01/2021
|
TID :42225420
Delhi
|
|
|
8. Sector : Education And Research Institute
Supply of lab consumables - dvd sony, cd sony, pen drive 8 gb hp/sony, sine cloth, screw driver set (taparia), gaws chisel 1” low carbon steel, cross chisel 1” low carbon steel, 1 ½” flat chisel low carbon steel, portable hand power planing machine, power screw driver machine, 2”x 1” yellow teak wood, 2” x 2” yellow teak wood, energy, spindle oil 30 grade, talpa oil 100 grade, engine oil 20w40 grade, kerosene, diesel, petrol, weighing machine digital 100 gm to 25 kg, thermometer 00 to 150 0c, stop watch digital, sheet metal, g. i. sheet 8 feet length x 3 feet width,, thickness 27 gauge, soldering lead, straight snip, soldering gun 250 watts, round snip, hydrochloric acid, welding, m s flat 50mm x 6mm x 20 feet, welding m s electrodes 3.15 mm size, (each packet containing approx. 90, electrodes per packet), power hacksaw blade 18 inch, smithy section, tongs 16 " (round), wooden handle big size, material testing, c r relay make m c 320 ke 22 series 1, 4 a,, 500 v, ac 11, fitter section, m s flat 50mm x 6mm x 20 feet, power hacksaw blade 18 inches, hacksaw blade 12 x ½ x 22 tpi, hacksaw frame 12”, flat chisel 1” high carbon steel, center punch 450 high carbon steel, machine, m s round rod 25 mm dia, cast iron dumbles 45x 35 x 200 mm, power hacksaw blade (mirand) 18”, hss tool 1” x 1” x 6”, gear box oil 40 grade, revolving centre m 24, knurling tool (diamond cut and parallel cut) 2 each, grease (white), cutting oil, spanner 16” x 17”, 22” x 24” (each), foundry, river sand (white), trowels, moulding box (kops and drag)10” x 10” x 4”, foundry sand (mixture), cutting player (taporia) to the department of mechanical engineering, uvce
|
Value :
0
*
|
Refer Document
*
|
Due Date :
6 Days to go
|
03/02/2021
|
TID :42244412
Karnataka
|
|
|
|
|