|
1. Sector : Non Classified
Acquisition Of Molins Plates
|
Value :
PYG 200 Cr
*
|
PYG 2 Bn
*
|
Due Date :
18 Days to go
|
31/08/2022
|
|
TID :48062040
Paraguay
|
|
|
|
|
|
3. Sector : Shipping
Procurement of steel plates.
|
Value :
2.20 Cr
*
|
22 Mn
*
|
Due Date :
4 Days to go
|
17/08/2022
|
|
TID :51797748
Multi State
|
|
|
4. Sector : Education And Research Institute
Supply of alumimium alloy bar - al 6061 size dia 150 x 1000 mm long, alumimium alloy bar - al 6061 size dia 200 x 1000 mm long, alumimium alloy bar - al 6061 size dia 300 x 1000 mm long, alumimium alloy plate - al 6061 size 1250 x 1250 x 50 mm thk, alumimium alloy plate - al 6061 size 1250 x 1250 x 60 mm thk, alumimium alloy plate - al 6061 size 1250 x 1250 x 100 mm thk, mild steel bar size dia 50 x 1000 mm long, mild steel bar size dia 100 x 1000 mm long, mild steel bar size dia 150 x 1000 mm long, aisi 304 bar size dia 250 x 1000 mm lg, mild steel bar size dia 200 x 1000 mm long, mild steel bar size dia 250 x 1000 mm long, aisi 304 bar size dia 300 x 1000 mm lg, mild steel bar size dia 300 x 1000 mm long, aisi 304 plate size 1250 x 1250 x 50 mm thk, mild steel plate size 1250 x 1250 x 20 mm thick, mild steel plate size 1250 x 1250 x 50 mm thick, mild steel plate size 1250 x 1250 x 60 mm thick, mild steel plate size 1250 x 1250 x 75 mm thick.
Qty 19119
|
Value :
INR 1.10 Cr
*
|
INR 11.02 Mn
*
|
Due Date :
3 Days to go
|
16/08/2022
|
|
TID :51651385
Karnataka
|
|
|
|
|
|
|
|
7. Sector : Fertilizers and pesticides
Procurement of inconel plates
|
Value :
INR 39.20 Lac
*
|
INR 3.92 Mn
*
|
Due Date :
11 Days to go
|
24/08/2022
|
|
TID :52000433
Madhya Pradesh
|
|
|
|
8. Sector : Municipal Corporations
Supply of material stome for masonry work, portland cement, coarse sand ( zone iii ), laterite stone of size 35x20x20cm, solid blocks of size 40x20x10cm, stone aggregate (single size) 20mm nominal size, stone aggregate (single size) 10mm nominal size, concrete mixer - hire charges, vibrator (needle type 40mm), second class kail wood in planks, second class kail wood in scantling, hollock ballies 125mm diameter, twisted steel / deformed bars, stone aggregate ( single size ) 40 mm nominal size, fine sand (zone iv), anjini wood scantls, mild steel round bar above 12mm dia, bright finished or black enameled mild steel butt hinges 100x58x1.90mm, bright finished or black enameled mild steel butt hinges 50x37x1.50mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, anjini wood planks, float glass sheet of nominal thickness 4 mm (weight not less than 10kg/sqm), ceramic glazed tiles first quality minimum thickness 5mm in all colours shades and designs except burgundy, bottle green black , ceramic glazed tiles first quality 300x300mm in all colours shades and designs of white, ivory, grey,fume red brown,etc \, deharadun white lime, water thinnable cement primer for interior wall surface having voc content less than 50gms/litre, acrylic exterior paint , exterior primer, pink primer ( for wood ), 200mm aluminium aldrop, iron hooks and eyes 100mm, pvc pipe 63mm outer dia. 6kgf/cm2, vitreous china orrisa type wc pan size 580mm, vitreous china flat back wash basin 630x450mm, 15mm cp brass tap, cp brass waste 32mm, ci bracket for wash basin and sinks, stainless steel kitchen sink- without drain board 470x420mm bowl depth 178mm, pvc pipe 32mm outer dia. 10kgf/cm2, pvc pipe 110mm outer dia. 4kgf/cm2, pvc pipe 40mm outer dia. 10kgf/cm2, pvc pipe 20mm outer dia. 10kgf/cm2, polyethylene water storage tank with cover and suitable locking arrangement, stone aggregate ( single size ) 06 mm nominal size, structural steel such as tees angles , channels and rs joists, red oxide zinc chromate primer , wall for panel 1250*450 mm, beam clamp 300 to 380 mm (450 to 1070mm), prop 2 m (2 to 3.5m), column clamb 450*1070 mm, adjustable span eso + si (2.35 to 3.4), corner ancle 45*45*5 mm 2.5 long, adjusable telescopic prop 3m (2.02 to 3.75 m), mild steel plates, weldibng by electric plant, mild steel tubes hot finished welded type, gi pipe 40 mm dia, flats upto 10mm in thick , interlocking cc paver block ( 60mm thick, m-30),
|
Value :
INR 8.04 Lac
*
|
INR 8.04 Lac
*
|
Due Date :
11 Days to go
|
24/08/2022
|
|
TID :51903923
Kerala
|
|
|
|
|
|
|