|
1. Sector : Power Plant
Sale of non-ferrous and ferrous scrap, , M.S. Miscellaneous scrap - 100 MT, PVC Empty container 200 Ltrs Capacity - 83 Nos., MS Empty Barrels 210 Ltrs Capacity (SH)- 600 Nos., M.S. Miscellaneous scrap - 30 MT, Auto Scrap - 67 Kgs, T&P Scrap - 13 Kgs, Bearing Scrap - 5065 Kgs, Ni- Hard Scrap - 1530 Kgs, G I Miscellaneous Scrap - 16810 Kgs, Cast Iron Scrap - 3098 Kgs, Wooden Scrap - 6320 Kgs, PVC Miscellaneous Scrap - 1044 Kgs, Ms Rail Cut Bit Scrap - 200 Kgs, Grinding Roller Scrap - 2940 Kgs, Fused SV Lamp Choke – 1003 Nos., Condemned Ceiling Fan (Without Blade & Regulator)-27 Nos., Condemned Tube Light Choke – 397 Nos., PVC Empty Container (35 Ltrs) – 70 Nos., Exhaust Fan (Without Blade & Regulator) – 05 Nos., Condemned Motor (Without Name Plate) – 01 No., Instrumentation Scrap – 351 Kgs, Cast Steel Scrap – 4240 kgs, MS Basalt Pipe Scrap – 17510 Kgs, Empty HDPL Polythene Bag Unserviceable – 2161 Nos, , Condemned Conveyor Belt scrap (Steel cord)- 120 MT, , Condemned Conveyor Belt scrap (Steel cord)- 117.460 MT, Released waste oil with MS empty barrels 200/210 Ltrs Capacity (SH) - 76 Nos with 15210 litres, Rubber scrap - 8.780 MT, Condemned Nylon conveyor belt scrap - 7.550 MT, M.S Hot end cold end basket scrap - 777 Nos.", Brass Scrap – 74 Kgs, Armoured Copper Cable – 2058 Kgs, Stainless Steel Scrap – 3733 kgs, Aluminium Scrap – 508 Kgs, Aluminium Casting Scrap – 380 Kgs, Armoured Aluminium Cable Scrap – 1826 kgs, Phosphur Bronze Scrap – 1098 Kgs, Hastelloy Scrap – 114 Kgs, SS Scrap Magnetic With MS Weldment – 3212 Kgs, Condemened Coil Scrap – 17 Nos., Compressor Scrap – 22 Nos.,
|
Value :
INR 1.71 Cr
*
|
INR 17.10 Mn
*
|
Due Date :
14 Days to go
|
10-02-2020
|
|
TID :38385669
Tamil Nadu
|
|
|
|
2. Sector : Municipal Corporations
Mgnrega materials supply -stone aggregate 40 mm nominal size, stone aggregate 20 mm nominal size, stone aggregate 10 mm nominal size, coarse sand (zone iii), ordinary portland cement, quarry wast, concrete mixer 0.25to0.40 cum with hopper, vibrater, hire charge of diesel road roller 8 to 10 tonne, diesel oil, stone aggregate80mm nominal size, stone aggregate 63 mm nominal size, stone aggregate 50 mm nominal size, stone cipping /screening 10/11.2 mm nominal size, stone cipping /screening 4.75 mm nominal size, stone cipping /screening 150 micron nominal size
|
Value :
INR 1.34 Cr
*
|
INR 13.44 Mn
*
|
Due Date :
Closing today
|
27-01-2020
|
|
TID :38297894
Kerala
|
|
|
|
3. Sector : Power Plant
Sale of scrap materials available at various sub stores - m.s scrap, stainless steel scrap, auto parts scrap, tube light fitting scrap, condenmend type-writter, aluminium scrap, acsr scrap, ug aluminium cable scrap, bronze scrap, aluminium cable scrap, condemned wall clock, condemned mv/sv lamp choke, condemned pedestal fan, condemned tubelight choke, condemned megger, condemned air conditioner, condemned exhaust fan motor, condemned rhoneo machine, condemned stabilizer, mv/sv lamp fitting scrap, m.s.scrap, m.s / steel wire rope scrap, stainless steel scrap, bearing scrap, auto scrap, tools & plants scrap, tube light fitting scrap, cast iron scrap, aluminum scrap, lead scrap, deal wood / country wood scrap, waste paper scrap, condemned tube light choke, ms empty drum leaky 200/210 litre capacity, condemned ceiling fan without regulator, ug aluminum cable cut bit scrap, condemned s.v / m.v lamp choke, condemned a.c unit window type-2-ton cap, condemned motor for exhaust fan, condemned submergible pump motor (25hp), make texmo, condemned thickness measurement gauge, ac induction motor 400 v, 72hp bth make (sh), ac induction motor 400v,156a, 11hp (sh), transformer oil pump motor 4.3 hp (sh), ac induction motor 10hp 400v. (sh), ac induction motor 400v,18.5hp (sh), dc generator type dy 11 kv, 100/63a (sh), oil starter hp 18.5 (sh) w/o oil, 22kv pt insulator (sh), hv busing (sh), star – delta starter suitable 72hp (sh) w/o oil, c.g make 75hp oil starter without oil - (sh), t.w. tray (sh), empty wooden drum 2' x 3', t. w. sc table with drawer (sh), t.w. dining table (sh) 4 1/2' x 2 1/2', t.w sc table (sh), t.w sc table without drawer (sh), t.w jc table without drawer ( sh), tw. form rack (sh), form rack cw (sh), magnetic level oil indicator (sh), interapting champer (sh), supporting insulator (sh), breaking champer insulater's (sh), waste oil (lub), empty drum 200 / 210l (sh)', distance ring for guide vane servomotor, piston ring for relief valve, ci piston for pressure relief valve 180/169, metal sealing ring for relief valve, flange for guide vane bearing bushing, valve seat sluice valve, distance ring for guide vane servomotor, metallic ring, cup seal for guide vane 200/155mm servo motor, sealing for draft ball valve, strainer disc as per drawing, lamination filter element, gm retaining cup, pb bush 70x85x155, packing ring 164x100x45mm, sealing ring 164/100q, plunger 120x45x105mm, control piston 230x50mm, plunger 120mm dia of spl brass alloy, shear pin mst 50/2, bolts 20x35m ss coated, guide vane key, coupling bolt for shaft, steel coupling bolt 195mm x 2 ¾, piston ring( for gate servomotor) 425x408x18mm, sealing ring for relief valve, ball bearing f a g 6212, gauge glass for governor tank, pilot sleeves actuator piston, piston valve 200x120mm, gear oil pump w/o ac motor 1400rpm, steel sleeve, gun metal safety valve ½’’, thrust ball bearing skf 51111, ci piston for pressure relief valve 100/93mm, piston for non-return valve 40mm, valve pin 210x28mm, pilot valve pin 12mm dia, pilot piston of actuator, taper roller bearing skf 30204, sealing ring for impulse valve, guide van lever, pilot piston for the unloaded valve, runner diaphragm rayon, spring charging handle, guide vane link, phosphor bronze bush, ss impeller 6 kw, steel gauge clutches, buna cup seal for guide vane, 137x110x10mm, buna cup seal for guide vane b type, cylindrical pressure spring, 35x22x3mm, buna pin cup for guide vane, spring for air valve, cylindrical pressure spring, 140x19x2.2mm, ci bushes for guide vane, air gauge 0.200lps, air gauge 0.100lps, compression air pressure gauge pipe, diaphragm plate 120513/a, stator winding bar for generator no3, stator coil, hydraulic u seal, tunnel tube for air cooler, spring for pre adjusting valve, glass cover with two flanges, illumination flanges with pump holder, 11kv spark horns with name plate for, distance, 11kv spark horns for gap distance, name plate), 6kv dw pump housing, cylindrical pressure spring, 220x32x4mm, cylindrical pressure spring, 46x30x3.5mm, spring for non return valve, bushes 25/22x12mm, bushes 40/35x39mm, pressure spring 123x35x5mm, pressure spring for nrv, 28x4x3.3m, spring for control magnet valve, cylindrical compression spring for the, unloaded valve dia 5mm, cylindrical pressure spring 22mm, polishing ball bar roller 18mm d, pressure spring for the unloaded valve, 5x45x120 mm, ss wearing ring, grinding wheel, grinding wheel 45x45x6.35mm, grinding wheel 1 ¼’’x1 ¼’’x1/4’’, grinding wheel 1 ½’’ x1’’ x1/4’’, (aluminium oxide), grinding wheel, 45x45x6.35mm, grinding wheel 1 ¼’’x1’’x 1/4’’, grinding wheel 1 ½’’x1’’ x1/4’’, polishing ball bar roller 60mm d, grinding wheel 30x30x6.35mm, polishing ball bar roller 60mm d(fine), runner skirt ring outer (ss), runner skirt ring inner (ss), piston rings for the relief valve 950x900x30mm, sealing ring 1210/1100x50mm, spl. brass alloy, de watering pump housing 22kw, thrust runner disc for 35 mw, upper regulating lever, special protection plat...
|
Value :
INR 57.35 Lac
*
|
INR 5.73 Mn
*
|
Due Date :
7 Days to go
|
03-02-2020
|
|
TID :38292000
Tamil Nadu
|
|
|
|
|
|
5. Sector : Municipal Corporations
Mgnrega materials supply -stone aggregate 40 mm nominal size, stone aggregate 20 mm nominal size, stone aggregate 10 mm nominal size, coarse sand (zone iii), ordinary portland cement, quarry wast, concrete mixer 0.25to0.40 cum with hopper, vibrater, hire charge of diesel road roller 8 to 10 tonne, diesel oil, stone aggregate80mm nominal size, stone aggregate 63 mm nominal size, stone aggregate 50 mm nominal size, stone cipping /screening 10/11.2 mm nominal size, stone cipping /screening 4.75 mm nominal size, stone cipping /screening 150 micron nominal size
|
Value :
INR 26.05 Lac
*
|
INR 2.60 Mn
*
|
Due Date :
Closing today
|
27-01-2020
|
|
TID :38297873
Kerala
|
|
|
|
|
|
|
|
8. Sector : Municipal Corporations
Earthwork in surface excavation for levelling and lowering the ground manually (other than foundation of buildings, culverts, road drains and trenches of pipe lines and cables) and removing the excavated stuff to a distance not exceeding 50m and lift up to 1.5m, excavated surface levelled and neatly dressed, disposed earth to be levelled including breaking of clods and neatly dressed as per specifications. Specification. No. Kbs 2.1(a) i 2.3.1 ksrb 2-1.1 -do -ordinary soil ( pwd.sr. 2018-19, p.no - 5. I.no - 2.1 ), Ksrrb m300-55. Construction of subgrade and earthen shoulders. Construction of sub-grade and earthen shoulders with approved material gravel/murrum with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table no. 300-2 complete as per specifications (including cost of earth, watering charges & compaction by vibratory roller)morth specification no. 305 ( pwd sr 2018-19 item-19.62 page-147), Ksrrb m600-1.providing and constructing dry lean cement concrete mix cc 1510 base with opc 25mm and down size graded granite metal coarse aggregate at 0.86cum and fine aggregates @0.58cum over a prepared sub-base, coarse and fine aggregate conforming to is 383-2016,aggregate cement ratio not to exceed 151, aggregate gradation after blending to be as per table 600-1,optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver, compacting with 8-10 tonnes vibratory roller, finishing and curing complete as per specifications. Clause 601of morth v revision and is 456 table-5 -do- with opc at 150 kg/cum and coarse aggregate 0.86cum, fine aggregate 0.58cum using concrete batch mix plant at 75 cum/hr capacity with slip form paver with electronic sensor. ( pwd.sr. 2018-19, p.no - 5. I.no - 22.1.4 ), Ksrrb m600-3. Construction of rolled cement concrete mix 148 opc @180kgs, with 25mm and down size graded granite metal coarse aggregate at 0.85cum and fine aggregates @0.57cum base course with coarse and fine aggregate conforming to is383, aggregate cement ratio 121 and minimum cement content of 180kg/cum, aggregate gradation to be as per table 600-4 after blending, mixing in batching plant at optimum moisture content, transporting to site, laying with a paver with electronic sensor, compacting with 8-10 tonnes smooth wheeled vibratory roller to achieve, the designed flexural strength, finishing and curing complete as per specifications( pwd.sr. 2018-19, p.no - 5. I.no - 22.3 ), Constructing un-reinforced, plain cement concrete for pavements using grade concrete m30 over a prepared base with opc coarse aggregate at 0.69 cum, fine aggregates at 0.46 cum,coarse and fine aggregate conforming to is383-2016, with superplastizer at 3 its conforming to is 9103-2008. Mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing). & spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters in a continuous operation including provision of contraction, expansion, construction and longitudinal joints,including groove cutting charges, joint filler, separation membrane of impermiable plastic sheet of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing tolines and grades, textured with texturing machine, and curing including cost of all materials, labour,hire charges of machineries,all lead & lift charges etc., complete as per specifications. -do- with opc at 360 kg/cum and coarse aggregate 0.69cum, fine aggregate 0.46cum.( pwd.sr. 2018-19, p.no - 5. I.no - 22.6 ), Ksrb 2-2.1 earthwork excavation for foundation of buildings, culverts, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5 m. In depth including dressing the bottom and sides of pits and trenches,stacking the excavated soil clear from edges of excavation with lead upto 50 m.after breaking of clods complete as per specification ( pwd sr 2018-19 item-2.3 page-06), Ksrrb m100-1 loading and unloading of stone boulder i stone aggregates /sand/ kanker i moorum. Ksrrb m100-1 placing tipper at loading point, loading with front end loader,dumping, turning for return trip, excluding time for haulage and return trip complete as per specifications. Morth -100/ chapter 1 ( pwd.sr. 2018-19, p.no -134. I.no -17.1 ), Ksrb 4-1.3 providing and laying in position plain cement concrete of mix 148 with opc cement @ 180kgs, with 40mm and down size graded granite metal coarse aggregates @0.85cum and fine aggregates @ 0.57cum machine mixed, machine mixed, concret...
|
Value :
INR 24.60 Lac
*
|
INR 2.46 Mn
*
|
Due Date :
Closing today
|
27-01-2020
|
|
TID :38290425
Karnataka
|
|
|
|
9. Sector : Municipal Corporations
Mgnrega materials supply -stone aggregate 40 mm nominal size, stone aggregate 20 mm nominal size, stone aggregate 10 mm nominal size, coarse sand (zone iii), ordinary portland cement, quarry wast, concrete mixer 0.25to0.40 cum with hopper, vibrater, hire charge of diesel road roller 8 to 10 tonne, diesel oil, stone aggregate80mm nominal size, stone aggregate 63 mm nominal size, stone aggregate 50 mm nominal size, stone cipping /screening 10/11.2 mm nominal size, stone cipping /screening 4.75 mm nominal size, stone cipping /screening 150 micron nominal size
|
Value :
INR 20.59 Lac
*
|
INR 2.05 Mn
*
|
Due Date :
Closing today
|
27-01-2020
|
|
TID :38297881
Kerala
|
|
|
|
|