1. Sector : Business Consultancy
Procurement, supply and commissioning of 04 nos. heavy duty direct circulation rotary rigs of 500 meter well construction capacity drill pipes of nc 50 tool joints (4½” if) of size 127mm (5”), external upset, grade e. range one 6.1 m (20 feet) long, weight 24.7 kg/m with steel thread protectors., drill pipes 88.9 mm (3.5 in), nc 38 if tool joints, external upset, grade e, ranqe one 6.1 m (20 feet) lonq, weight 19.8 kg/m with steel thread protectors., triple sheave travelling block with single latching hook, capacity not less than 500 kn, 152 mm (6 in) x 7.50 m (25 ft) long suction hose with fittings, strainer, and foot valve, 76.2 mm (3 in) x 10 m (33 ft) long high pressure wire braided swivel hose complete with fittings and mud mixing gun., drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 203.2 mm x 6.1m (8 in x 20 ft), 167.3 mm (6-5/8 in) rh reg threads with steel thread protectors, drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 158.8 mm x 6.1m (6-1/4 in x 20 ft), 88.9 mm (4½ in) rh reg threads with steel thread protectors, kelly saver sub box to pin (4½" if) made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 (each size drill pipe - 2 nos), box (4½” if rh) to pin (3½ if rh) sub for kelly saver to 88.9mm drill pipe, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75cm., box (4 ½” if rh) to pin (4½” if rh)sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75m., box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (4½” reg rh) to box (4½" reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (6 5/8” reg rh) to box (6 5/8” reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (4½” if rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, sub for attaching fishing tools (si. no 79 to 87) with 88.9mm drill pipe (one set will contain two number of subs for each different size to fishing tools joints), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½" reg rh connection) x box (4 ½” reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (6 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (7 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box 3 ½” if, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box 6 5/8” reg rh connection to box ( 6 5/8" reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box (7 5/8" reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, pin (4 ½” regular rh connection) to box (3 ½” if rh connection), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 sub, box (4 ½” if connection) to box (4 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½” if connection) to box (3 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3 ½” if connection) to box (3 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, any other size sub required for forming drill string, and shall be made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, type c rotary tong, 60.3 mm x 273 mm (2-3/8 in x 10-3/4 in), com...
|
Value :
INR 38.13 Cr
*
|
INR 381.35 Mn
*
|
Due Date :
2 Days to go
|
27/01/2021
|
TID :42170570
Delhi
|
|
|
|
3. Sector : Coal and Lignite
Procurement of lhd spares, slip ring and brush holder assl. (250m000000134), halogen reflector lamp 24v/50w(eea0026326), link pin(625a000003261), shaft tension end(811b060000175), drive shaft- m(811b060000174), half shaft(eeea0021717), idler sprocket assy ( 250a070000036) , chain wheel (1"pitch) (250b060000054), bush (625a000003260), sprocket (625c000003249) , pillow block bearing (811a050000143), hyd. pump (811b050000101), drive line rear (811b050000130), spider assy. (811m100000417), oil seal (eea0009093), seal output saft (eea0010906), seal (eea0015404), bush(mbh150/170/140a), chain 1" (250a050000031), roller(811a050000103), roller(811a050000104), flight bar and link assly.(811b070000456), transmission (20000) (811c050000116), lift arm assly(811a070000460), startor support(eea0010916) at jk area
|
Value :
INR 36.73 Lac
*
|
INR 3.67 Mn
*
|
Due Date :
11 Days to go
|
05/02/2021
|
TID :42370078
Madhya Pradesh
|
|
|
4. Sector : Other Services
Supply of prosthetic and orthotic equipments / materials - vacuum machine, pscillating saw with blades, zigsaw machine, heat gun, battery operated hand drill, hand shearing machine / metal shear with hand lever, combination grinder cum sander / polisher, oven, alignment apparatus set, padding foam foot scanner 3D medi ACE3D, foot molding machine, multicutter, socket router, piller drill machine / column drill machine, amputee standing frame, lesser alignment apparatus, swing machine, motorized intermittent cervical & lumber traction unit, moist heat unite, cera gem thermal bed, weight machine, static cycle upper & lower both, electrical stimulator LCD / dual channel, shoulder wheel magnetic / LCD, cold pack unit 12 variable cold gel packs, ultrasound unit, overhead pulley, trade mill, stair case, pronator supinator unit, therapy ball / physio ball, corner chair, ADL board, quadriceps exercise table, grip exrciser, weighted cuffs, medicine ball, postural training mirror, standing frame, parallel bar, peg boards, pop boards, little biggest blocks, balls, toys, balance board, ankle exerciser, theraband, inferential therapy, bolster, laser, spacer set, wire hand brush, plaster stirrer, plaster cutting knife, heat resistance glove, rubber hammer, mallet hammer, combination piller (plastic cutter), rivet (wire) cutter, vice gripping plier, contouring iron, tube cutter.
|
Value :
INR 30 Lac
*
|
INR 3 Mn
*
|
Due Date :
2 Days to go
|
27/01/2021
|
TID :42210996
Chhattisgarh
|
|
|
|
6. Sector : Minerals
Annual rate contract for civil maintenance work. - Engaging portable electrically operated heavy-duty breaker machine for dismantling of concrete foundation, floor concrete, masonry wall, brick bunds, other unwanted old footings etc., including cutting of re- bars using grinder/gas cutter, operator charges, labour charges for cleaning & shifting the debris generated into our scrap yard, hire charges of the machine etc Labour charges for dismantling of ms structural by appropriate cutting method (cold cutting/gas cutting etc.) The work includes cutting, removing of ms structural like columns, beam, platform, staircase etc. And dispose the dismantled items in to the scrap yard Fabrication & erection of ms structural supports such as side cladding angles, handrail, staircase, false ceiling supports, cleats, stiffeners, battens, joint plates, purlins and other supports etc., including straightening, cutting, fixing in position, welding, bolting at required places, painting the steel surface with one coat of epoxy primer & one coat of epoxy finish paint after thorough surface preparation to carry out the complete work Labour charges for painting the masonry surface with one coat of water based primer & two coats of water based finish paint after necessary surface preparation. The work includes removing of any loose old paint layer, dirt, grease etc., using, sand/emery paper/wire brush, scrubbing with water wherever required, cleaning using cotton waste and disposing the debris within a distance of 200m inside the company premises. Any cracks found on the masonry wall shall be filled using crack filler/wall putty to make the surface smooth for painting. Successive coats of paint shall be applied only after hard drying of the previous coat. The rate shall include labour charges, cost of scaffolding, paint brush, hire charges of high pressure jet pump and other tools required for the work. Irel will issue paint & primer free of cost Providing masonry work in cm 15, using concrete block/brick of required size including raking out joints, finishing to proper lines & levels, chipping the existing floor concrete surface for necessary bonding, curing etc. Plastering in cm 14, 10 mm average thick, using good quality m- sand, one coat floated hard and trowelled smooth and curing etc., complete. Plastering in cm 14, 10 mm average thick, using good quality m- sand, one coat floated hard and trowelled smooth and curing etc., complete. Providing and laying in position plain cement concrete mix 124 (1 cement, 2 coarse sand and 4 graded broken stone aggregate 40- 20mm nominal size) for floor concrete repair work, damaged pit, bunds etc., after ramming of existing earth, well compacted, finishing smooth to a fair face at all levels, curing etc Providing & laying reinforced cement concrete 11.53 mix (1 cement, 11/2 coarse sand and 3 graded broken stone aggregate 10- 20mm nominal size) for damaged road repair, machine foundation, tank footing, collection pit, precast slab, man hole / chamber etc. Labour charges for fixing reinforcement high yield strength deformed bars, cutting to required size, bending & placing in position, binding with 18/20 gauge black annealed/ gi tying wire, including lead, lift of reinforcement form our stores to site, laying as per drawing and as directed by engineer-in-charge (weight of steel bar shall be taken as per relevant is standard). Providing, fixing & dismantling after use, scaffoldings in interior, exterior of buildings, made using 40 mm nb-ms pipes, clamps & suitable wooden planks, for using as working platform to carry out any repair/modification/painting work Engaging back hoe loader / jcb for leveling site clearing, earth work, removal of debris/waste etc. Engaging tipper lorries for site clearance/shifting of waste/debris etc, as directed by engineer-in-charge
|
Value :
INR 22.61 Lac
*
|
INR 2.26 Mn
*
|
Due Date :
2 Days to go
|
27/01/2021
|
TID :42233195
Kerala
|
|
|
|
8. Sector : Coal and Lignite
Procurement of spares - drain filter cartridge, part no.4205684, hyd oil tank element filter, part no.4333469, pump tranmission oil filter, part no.4252563, pilot oil element, part no.4207841/3015259, strainer hydraulic oil tank, part no.4237660/4317008, ac element outer, part no.4240294/1199364, ac element inner, part no.4240295/1168261, tooth, part no.td08413, lock pin, part no.te08790, washer, part no.te08791, pin assy, part no.8045358 for tata-1200 hyd excavator.
|
Value :
INR 8.45 Lac
*
|
INR 8.45 Lac
*
|
Due Date :
2 Days to go
|
27/01/2021
|
TID :42403810
Orissa (Odisha)
|
|
|
|
10. Sector : Education And Research Institute
Supply of painting items 2020-21 - distemper white- asian/berger/tractor, primer white interior wall painting-asian/berger/tractor, primer white exterior wall painting -asian/berger/tractor, interior wall emulsion paintasian/berger/tractor, exterior wall emulsion paintasian/berger/tractor, stainer - all colours 100 ml, enamel paint all coulerasian/berger/tractor, enamel paint all coulerasian/berger/tractor, enamel paint all coulerasian/berger/tractor, terpent oil (1 ltr) bottle, thinner, white cem /chunna/lime, pop powder, brush 1" to 10 ", roller 1 " to 10 ", emery paper 80, patty blade 4", patty blade 6", wall patty - birla white, white cement - branded, cement bag- acc/ultra tech/my cem, bricks -soil.
|
Value :
INR 2 Lac
*
|
INR 2 Lac
*
|
Due Date :
3 Days to go
|
28/01/2021
|
TID :42471920
Karnataka
|
|
|