|
|
|
|
|
|
|
|
9. Sector : Power Plant
Work of removal ms/cs 600 nb (24” inch) size existing pipes, including valve& bend and erection, commissioning of ss 316l (24” inch) pipe of idct shell no. 1 to 11 during aoh/coh/fsd/rsd of unit no. 3 and 4. work of supply and application of metal protective paint/coating on external surface of various structures & auxiliaries of ash handling plant of unit no.3 & 4. various maintenance related work of dm plant, pt plant & et plant on "as & when required" basis. work of various maintenance related to boiler unit 3 to 4 on “as & when required basis. work of maintenance at emd-i tps on as & when required basis. work of on line pd testing of 245kv-1200 sq. mm and 300 sq. mm xlpe cable termination bushing with required testing equipment. work of removal, fabrication, erection, testing & commissioning of ms/cs/gi piping of various size, at various location for tg and bop area of unit 3 & 4, on as and when required basis at stps. work for store materials unloading, loading, shifting and stacking with scrap, gases bottles, chemicals & other misc. works for store at stps. supply of control and power cable at stps. supply of ms hot dip galvanized grills for various locations unit. no. 3 & 4. annual rate contract for supply of various cartridges at stps. supply and application of corrosion protection lining of 02 mm thickness on external surface of structures inside the chimney of boiler unit no 3 & 4.
|
Value :
INR 40.94 Lac
*
|
INR 4.09 Mn
*
|
Due Date :
24 Days to go
|
17/06/2022
|
TID :49776868
Gujarat
|
|
|
10. Sector : Power Plant
Procurement of critical and consumable spares - oil thrower, lock nut and washer ( 2 nos./set), shaft seal/piston ring, spacer for gear/distance piece(gear side), spring dowel, oil splasher, bearing lock plate, internal snap ring, oil seal, o ring for all seal bush, key for oil flanger, drive and non drive lobe with shaft, non return valve, pressure relief valve, anti-vibration pad (04 nos./set), sealing bracket, shaft sleeve (04.nos./set), condensate sealing ring (04 nos./set), suction filter, timing gear(02 nos./set), oil seal bush/lead through shaft seal, spares for swam make air blower of silo area, model rm-180wctr (a-6019) , drive side end cover, drive rotor with shaft , non drive rotor with shaft , gear lock washer, locked bearing, floated bearing, oil flinger (aluminium disc), key for oil flinger, key for pulley/coupling, oil chamber (drive side), oil chamber (non drive side), drain plug, filing plug, condensate plugs, dowel for end cover & casing, dowel for end cover & oil chamber, allen bolt for end cover & casing, hex bolt for sealing bracket, oil level indicator (alumi. round), allen bolt for oil chamber & e cover, allen bolt for bearing housing, hex bolt for bearing lock plate, sealing gasket /liquid gasket, plug fo instrument connection, anti vibration rubber pads(04 nos./set), flexible bellow, distance piece (gear side), piston ring, oil thrower, bearing housing, bearing lock plate for de and nde, lock nut and washer, gear lock nut, oil splasher, lip seal, lead through cover/sealing bracket, oil thrower, distance sleeve, shaft sleeve drive shaft (04 nos./set), distance piece nde, condensate sealing ring(04 nos./set), o rings( 05 nos./set), timing gear (02 nos./set), suction filter, oil seal bush/ lead through shaft seal(nos.) of m/s swam make air blower for esp area and silo area installed at ash handling plant at 2x600 mw, units of sstpp mppgcl, dongalia.
|
Value :
INR 33.02 Lac
*
|
INR 3.30 Mn
*
|
Due Date :
13 Days to go
|
06/06/2022
|
TID :49800948
Madhya Pradesh
|
|
|