|
2. Sector : Municipal Corporations
Supply of material supply of various mgnregs works - quarry waste, stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, coir pith compost, foundations,footings, bases of columns, ect for mass concrete , stone for masonry work, fine sand (zone iv), interlocking c.c. paver block (80 mm thick, m-30), stone aggregate(single size) 06 mm nominal size, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m (2.02-3.75m), stone aggregate(single size) 10 mm nominal size, twisted steel/deformed bars, through and bond stone size 24 x 24 x 39cm, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), solid blocks of size 30x20x20cm, average rate of mild steel round bars for reinforcements, stone aggregate(single size) 06 mm nominal size, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, mild steel round bar above 12 mm dia, hollock wood in planks, kiln seasoning of timber, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, mild steel tubes hot finished welded type, welding by electric plant, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, galvanised steel j or l hooks 8 mm dia, bitumen washer, g.i. plain washer thick, precoated aluminium trafford sheet 0.450mm thick, polyethylene water storage tank with cover and suitable locking arrangemnet, vitreous china flat back wash basin 630x450 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 15 mm outer dia. 12kgf/cm2, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, water proofing cement paint, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, wire nails, epoxy paint, hollow blocks of size 40x20x20cm, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, vitreous china flat back wash basin 630x450 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 25 mm outer dia . 12 kgf/cm2, pvc pipe 110 mm outer dia 6kgf/cm2, factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile, deharadun white lime, pink primer (for wood), solid blocks of size 30x20x15cm, mild steel tubes hot finished welded type, pvc pipe 63 mm outer dia. 4 kgf/cm2, pvc pipe 50 mm outer dia.6kgf/cm2, aracanut post, gi trafford profile sheet 0.35mm thick, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, second class kail wood in planks, second class kail wood in scantling, safeda ballies 125 mm diameter, pvc pipe 40 mm outer dia. 6kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, g.i pipes 50 mm dia, g.i. pipes 40 mm dia, pvc pipe 25 mm outer dia. 10kgf cm2, anjili wood scantls, galvanised steel corrugated sheets.
|
Value :
INR 5.67 Cr
*
|
INR 56.75 Mn
*
|
Due Date :
7 Days to go
|
28/05/2022
|
TID :49541723
Kerala
|
|
|
|
|
5. Sector : Power Plant
Supply and fabrication of rs joist, ms channels, ms plate, supply of ms flat, ms rod, erection of structure, earth bore, earth mat, earth raiser, erection of 110, 33 & 11 kv breakers, ct, pt, ab switches, providing droppers, jumpers, laying of cables & end terminations and supply of station auxilaries & etc., for enhancement of power transformer capacity from 4x16 MVA, 110/11 kv power transformer into 5x16 mva, 110/11 kv power transformer at irungatukottai ss.
|
Value :
INR 42.80 Lac
*
|
INR 4.28 Mn
*
|
Due Date :
3 Days to go
|
24/05/2022
|
TID :49738296
Tamil Nadu
|
|
|
6. Sector : Power Plant
Supply, fabrication, sand blasting & zinc painting of rs Joist, MS Channels, MS Plate, supply of MS Flat, and erection of structure, earth raiser, erection of 110 KV & 33 kv breakers, CT's, AB Switches, providing droppers, jumpers, laying of cables & end terminations & etc., for enhancement of the existing 110/33 - KV Power transformer capacity from 1 x 25mva to 2x25mva at puduthangal 110/33 - 11kv ss.
|
Value :
INR 22.32 Lac
*
|
INR 2.23 Mn
*
|
Due Date :
4 Days to go
|
25/05/2022
|
TID :49719241
Tamil Nadu
|
|
|
7. Sector : Municipal Corporations
Purchasing material - submersible motor pump for use in 200mm dia borewell(tubewell), three phase 415volt line-to-line, 50hz frequency, motor rating 3.73 kilowatt/05 horsepower, discharge head- 100m/328.08foot or high, number of stages 08 or more, for handling of clear,cold,drinkable water, conforming to is8034 and is9283, bee energy star rating- 3star or more, bis certified make, popular make- waterman,rockwell,kirloskar,duke plasto, lubi, uom- each, submersible motor pump for use in 200mm dia borewell(tubewell), three phase 415volt line-to-line, 50hz frequency, motor rating 7.4 kilowatt/10 horsepower, discharge head- 120 m/393.7 foot or high, number of stages 08 or more, for handling of clear,cold,drinkable water, conforming to is8034 and is9283, bee energy star rating- 3star or more, bis certified make, popular make- waterman,rockwell,kirloskar,duke plasto, lubi, uom- each, submersible motor pump for use in 200mm dia borewell(tubewell), three phase 415volt line-to-line, 50hz frequency, motor rating 9.3 kilowatt/12.5 horsepower, discharge head- 120 m/393.7 foot or high, number of stages 12 or more, for handling of clear,cold,drinkable water, conforming to is8034 and is9283, bee energy star rating- 3star or more, bis certified make, popular make- waterman,rockwell,kirloskar,duke plasto, lubi, uom- each, submersible motor pump for use in 200mm dia borewell(tubewell), three phase 415volt line-to-line, 50hz frequency, motor rating 11.19 kilowatt/15 horsepower, discharge head- 120 m/393.7 foot or high, number of stages 12 or more, for handling of clear,cold,drinkable water, conforming to is8034 and is9283, bee energy star rating- 3star or more, bis certified make, popular make- waterman,rockwell,kirloskar,duke plasto, lubi. uom- each, submersible motor pump for use in openwell, three phase 415volt line-to-line, 50hz frequency, motor rating 14.9 kilowatt/20 horsepower, discharge head- 100 m/328.08 foot or high, number of stages 08 or more, for handling of clear,cold,drinkable water, conforming to is142201994 reaffirmed 2009, bee energy star rating- 3star or more, bis certified make, popular make- waterman,rockwell,kirloskar,duke plasto, lubi, uom- each, kirloskar diesel engine-water-pump,complete unit including water pump and engine, for handling of clear,cold,drinkable water, conforming to is115011986 reaffirmed 2016, bis certified make, popular make- kirloskar, engine power rating- 05 horsepower, uom- each, kirloskar diesel engine-water-pump,complete unit including water pump and engine, for handling of clear,cold,drinkable water, conforming to beaureu of indian standard , bis certified make, popular make- kirloskar, engine power rating- 08 horsepower, uom- each, mnoblock motor pump for use in openwell, three phase 415volt line-to-line, 50hz frequency, motor rating 07.46 kilowatt/10 horsepower, discharge head- 100 m/328.08 foot or high, number of stages 08 or more, for handling of clear,cold,drinkable water, conforming to is142201994 reaffirmed 2009, bee energy star rating- 3star or more, bis certified make, popular make- kirloskar, texmo,havells, uom- each, rotodyanamic self priming motor coupled pump, special purpose pump in compliance to is5120 latest, centrifugal pump for handling various types of liquids other than clear, cold and fresh water,handling chemicals, effluents,sewage,ash water. for usage in dewatering of foundation, trenches, and pits. flood water handling. pumping water from docks, ports, vessels. dewatering from basements,multi-storeys,shopping malls, godowns. suction pipe size- 100mm, delivery size- 100mm, size(diameter) of solids in liquid to be handled -23mm, motor rating - 9.3kilowatt/12.5 horsepower, motor type- three phase ac motor 415 volt, 50hz, degree of ingress protection - ip-55, uom- each, riser pipes with socket for submersible pumps, having diameter equal to diamer - 50mm/2inch, conforming to is 1239(part1)2004 with up-to-date amendments, lengh of one unit of pipe 10 foot/ 3meter , screwed at both ends as per is 554 latest and isi marked socketed as per is 1239(part2)/1992 reaffirmed 2002 at one end and other end protected with plastic protector, hot dipped galavnised zinc coating on the tubes shall be in accordance with is 4736, category of steel tubes- blue for medium tubes, bis certified make, popular make- tata, jindal, uom- each, rigid upvc pipes for supply of potable water for public consumption, as per is 49852000 latest, one end socketed and other end plain such that the two pipes could be joined with the help of solvent cement, bis certified make, lengh of one unit of pipe 20foot/6meter nominal outside diameter- 63mm, pressure nominal- 0.60mpa/6.0 kg per square centimeter, uom- each, rigid upvc pipes for supply of potable water for public consumption, as per is 49852000 latest, one end socketed and other end plain such that the two pipes could be joined with the help of solvent cement, bis certified make, lengh of...
|
Value :
INR 20 Lac
*
|
INR 2 Mn
*
|
Due Date :
16 Days to go
|
06/06/2022
|
TID :49499657
Madhya Pradesh
|
|
|
|
|
|