|
|
|
|
|
3. Sector : Municipal Corporations
Supply & installation of pumping plant - 7.1 mmmserew casing pipe 200 mm, m.s ring 20 mm, m.s bail plug, m.s well cap, welding work on 200 mm, development of boring by 250 psi compressor, testing of water, m.s clamp heavy duty, government of bihar.i flanged colum pipe each, cid / f sluice valve 80 mm, construction of.i flanged tee, reflex valve, m.s flange, nut-bolt, rubber packing, submersible motor pump set, 3 phase fully automatic switch starter panel, submersible flat, cu cable m.s.
|
Value :
INR 11.19 Lac
*
|
INR 1.11 Mn
*
|
Due Date :
Closing today
|
30-03-2020
|
|
TID :39287083
Uttar Pradesh
|
|
|
|
|
|
|
|
|
|
7. Sector : Security Services
Supply of op wks stores - ismb 150 x 75 mm (5.70 mtr long), pattan, ismb 150x75mm (3.75 mtr long), pattan, long angle iron picket (laip) 1830 mm long and 45x45x6mm, pattan, long angle iron picket (laip) 3050 mm long and 50x50x6mm, pattan, steel roofing troughs (srts) of size 1630mm x 613mm x 180mm made out of 2mm thick hot rolled carbon sheet steel conforming to is 5986 fe-330 complete with set of 14 nos ms hexagonal nut, bolts and washers 12 mm dia 40mm long and a spanner ojde of size 20-22 per 25 nos srts., pattan, "supply of class 1 double twisted, zinc coated ms gabion boxes of size 3m x 1m x 1m having following specifications -, (a) mesh size - 80 x 100 mm, (b) number of diaphragms - 02 nos, (c) mesh wire size - 2.40 mm, (d) mesh wire dia – 3.00 mm, (e) edge / selvedge dia – 3.90 mm, (f) lacing wire dia – 2.20mm, (g) minimum qty of lacing wire – 3% of total weight of gabion basket supplied. , 22 nos for each shelter.", pattan, cgi sheet 810 x3660mm long, 0.63mm thick with galvanized of 375 gsm (galvanisation as per is-429), pattan, pgi sheet 3'x7'x1 mm, pattan, supply of jelly filled lighting conductor as per technical specifications and drawing attached appendix k of rfp., uri, naugam, rampur/ boniyar, baramulla, pattan, winter route marker. provision of winter route marker snow mast (wrm) made of ms structural steel tube section having three segment of different bore as described details of three steel tube section shall be as perspecifications and drawing attached appendix l of rfp., uri/mohura, naugam, uri/mohura, naugam, "alpha fence supply of high security weld mesh panels as per below spec. mesh wire horizontal wire, dia 4.0 mm (+/- 0.05mm) vertical wire, dia 4.0 mm (+/-0.05mm) mesh size mesh size of 12.7 x 76.2 mm along mesh ( mesh wire is 280 2006)., panel size &weight 2600x800mm 20.52 kg, coating zinc coated 40-50gsm &60 to 80 microns of powder coating color ral 6005. powder coating should withstand 1000 hours of salt spray test. wire tensile strength min 550 n/sq.mm. weld tensile strength min 70 % of wire tensile strength. note high security weldmesh is been installed at the bottom.. ref drawing no nc/lc/a8/v2.2. material ms mesh wire dia4mm is 280 2006 coating is 4826 – 1979 weld mesh as per en 10223-7", uri, rampur/ boniyar, "alpha fence supply of weld mesh panels as per below spec., mesh wire horizontal wire, dia 5.0 mm (+/- 0.05mm) vertical wire, dia 4.5 mm (+/-0.05mm)mesh size mesh size of 50 x 100 mm - v bend &50x200 mm (+/- 2 mm) along mesh ( mesh wire is 280 2006). panel size &weight 2600x800 9.3 kg, coating zinc coated 40-50gsm &60 to 80 microns of powder coating. colorral 6005. powder coating should withstand 1000 hours of salt spray test. wire tensile strengthmin 550 n/sq.mm. weld tensile strengthmin 70% of wire tensile strength. note weldmesh is installed vertically above the high security weldmesh ref drawing no nc/lc/a8/v2.2. material ms mesh wire dia4mm is 280 2006 coating is 4826 – 1979 weld mesh as per en 10223-7", uri, rampur/ boniyar, bravo fence supply of weld mesh panels mesh wire horizontal wire, dia 5.0 mm (+/- 0.05mm) vertical wire, dia 4.5 mm (+/-0.05mm) mesh size mesh size of 50 x 100 mm - v bend &50x200 mm (+/- 2 mm) along mesh as per dwg. ( mesh wire is 280 2006). panel size (w &h) &weight ( tol +/-5%) 2600x1000mm 11.02 kg, coating zinc coated 40-50 gsm&60 to 80 microns of powder coating color ral 6005. powder coating should withstand 1000 hours of salt spray test. wire tensile strength min 550 n/sq.mm. weld tensile strength min 70 % of wire tensile strength. ref drawing no nc/lc/a8/v2.2. mesh wire is 280 2006 coating is 4826 – 1979 material ms material weld mesh as per en 10223-7, uri, rampur/ boniyar, alpha fence (for 4 km) details of fence componets accessories, technical specification and qty attached as per annexure vi of part ii of rfp, , uri, rampur/ boniyar, bravo fence (for 4 km) details of fence componets accessories, technical specification and qty attached as per annexure vii of part ii of rfp, , uri, rampur/ boniyar.
|
Value :
0
*
|
Refer Document
*
|
Due Date :
11 Days to go
|
10-04-2020
|
|
TID :39250582
Jammu-kashmir
|
|
|
|
|