|
|
|
|
|
|
|
4. Sector : Power Plant
Supply of spares, hp pistion ring & rod assembly, hp cylinder part no 2820020150, outer cover hp part no 2820020250, delivery valve assembly, part no. 2480070050, valve seat hp part no.2480060150, one way clutch assly part no.2180110750, valve holder(hp suction),part no2460300550, compression ring(lp),part no2820031950, compression ring(hp),part no2820036350, hex nut m 12x1.75,part no9990665050, valve plate (lp),part no2440060350, cushion plate (lp),part no2440060450, valve spring (lp suc.),part no2440060550, valve assembly. (hp suc.),part no2480060050, valve plate (hp),part no2460060350, cushion plate (hp),part no2460060450, valve spring (hp suc.),part no2460067450, spring helical (hp del.),part no2460067250, castle nut (hp del.),part no2460060950, piston rod (lp),part no2820030650, old hams joint,part no2180110950, valve cover (suction) , part no. 2460060750, crank case assembly, part no. 2810042750, main bearing lower half, part no. 2810041850, thrust washer, part no. 2810051150, suction valve assembly, part no. 2470060050, delivery valve assembly, part no. 2470070050, oil seal, part no. 2510112950, cross head & shoe assly, part no. 2810032650, inner cover lp part no. 2820010350, wear ring lp part no. 2820032050, gear pump assy. pn 2510110050, breather assembly pn 2460044150, unloader fork pn 2470061750, crank shaft part no 2810051050, brg. big end, part no 35110100, bearing main (pr) part no 35110120, washer thrust part no 23632700, cover front end ( hp ) , part no. 35165080, nut hex ( piston rod ), part no. 22072630, ring sealing lp 350 dia part no. 35324760, spring plats (0.6mm) part no. 49239070, gasket- under valve part no. 24431180, rod connection part no. 3536404000, cross head part no. 3517604000, pin dowel part no. 23310410, bell valve suction (hp) part no. 35112310, pin dowel part no. 23311090, rod piston (hp) part no. 3532810000, ring scraper part no. 49047030, stud part no. 22228640, protection grill part no. 49141010, element filter air part no. 3619036000, nut m 18x1.5 part no.22072303, lp piston assembly pn 3502677000, hp piston assembly pn 3502672000 etc for air compressors, model no. tbtd-qm installed in unit i and model no. 2ha2qt installed in unit ii to v at stps, suratgarh.
|
Value :
INR 62 Lac
*
|
INR 6.20 Mn
*
|
Due Date :
11 Days to go
|
14/07/2022
|
|
TID :50519235
Rajasthan
|
|
|
|
5. Sector : Power Plant
Supply of hexagonal bolt as per ts , stud biolt with one nut as per ts , hexagonal bolt with nut reamer type as per ts , hexagonal bolt with nut and washer 02 nos as per ts , hexagonal bolt with nut as per ts , hexagonal bolt with nut and washer as per ts , stud bolt with double nut as per ts , lock washer as per ts , hex bolt with nut as per ts , hex bolt with spring washer as per ts , stud bolt as per ts , hexagonal socket as per ts , flush bolt as per ts boq title nut bolt and stud of different sizes
|
Value :
INR 17.38 Lac
*
|
INR 1.73 Mn
*
|
Due Date :
2 Days to go
|
05/07/2022
|
|
TID :50598818
Sikkim
|
|
|
|
|
|
7. Sector : Security Services
Provision of sewage pump with allied items - supply & installation testing and commisioning of electric driven self priming non clog centrifugul pump of capacity 18.5kw/25 hp 415 volt 3 phase 50 hz 1450 rpm , 18-28m head inclusive of casing and impeller madeout of ci and stainless steel shaft stuffing box seal gland packed and base frame of ms febricated and incl vibration pad, suitable bend, elbow, washer, nuts, bolt, studs, thimbles incl all types of cutting / threading / welding/ grouting work / making holes to walls making all connection to the delivery and suction pipeline as per site requirement for smooth functioning of sewage distribution including foundation of pump motor complete all as specified and directed. , supply & installation testing and commisioning of non-clog submersible pump with cutter 5hp 415 v of 3 phase 50 hz, 500 lpm, head of 20m head, chrome steel impeller and cutter , non clog to pass 40 mm size particles inclusive of constructing pit chamber of rcc/pcc below ground level suitable for placing of motor inside the pit incl nuts, bolts, washers, clamps, bends, elbow, welding, groutiing etc. and s&f, testing fully automatic starter with single phase preventer and automatic sensor system for on/off. , excavation in trenches in soft/loose soil not exceeding 1.5 metre deep and not exceeding 1.5 metre wide for laying of pipes in trenches and getting out, complete all as specified & directed., all as per item no 3 above but in hard/dense soil., returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each, after laying of pipeline complete all as specified & directed., removing excavated surplus material to a distance not exceeding 50 metres and depositing where directed, at a level not exceeding 1.5 metre above the starting point, complete all as specified & directed., m&l ci sluice valve of 150mm rising spindle pn 1.6 as per is;14846 including ci flange with gaskit of matching hole to fix easily to the existing system complete all as specified., m&l ci sluice valve of 80mm rising spindle pn 1.6 as per is;14846 including ci flange with gaskit of matching hole to fix easily to the existing system complete all as specified., m&l foot valves, without bypass arrangement, vertical installation, flanged type for iron pipe of 100 mm bore as per is 4038 including taking out old unserviceable valve complete all as directed. , m&l cast iron non return valve rising spindle of 150mm bore as per is 5312 part 1 pn 1.6 including nuts, bolts complete all as specified & directed., m&l cast iron non return valve rising spindle of 80mm bore as per is 5312 part 1 pn 1.6 including nuts, bolts complete all as specified & directed., s&f stop valves , cast copper alloy, screwed down , high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed suitable for 25 mm bore complete all as directed., m&l for laying the ms erw pipe 150 mm bore and of wall thickness 6.00mm with all fitting i.e. including tee, elbow, reducer, union, nipple, socket etc. in new or old position, floors, walls, ceiling complete all as specified & directed., m&l for laying the ms erw pipe 100 mm bore and of wall thickness 6.00mm with all fitting i.e. including tee, elbow, reducer, union, nipple, socket etc. in new or old position, floors, walls, ceiling complete all as specified & directed., m&l for laying the ms erw pipe 80 mm bore and of wall thickness 6.00mm with all fitting i.e. including tee, elbow, reducer, union, nipple, socket etc. in new or old position, floors, walls, ceiling complete all as specified & directed., "m&l for laying the ms erw pipe 50 mm bore with all fitting i.e. including tee, elbow, reducer, union, nipple, socket etc. in new or old position, floors, walls, ceiling complete all as specified & directed. , (note for srl itemno 13 to 16 dismantling and refixing of chequerred tile, interlocking tiles, kota stone, wall ceiling / panelling and making holes through walls or ground, ms flat iron supports, nuts, bolts, clamps are deemed to be incuded in quoted rate). ", m&l pcc 124 type d-2, using 20 mm graded stone aggregate including demolishing the existing damaged foundation, provision of necessary form work / brick work where required and finishing fair to the exposed surfaces, complete all as directed. , "fabricate,supply, install, connect, test and commission lt feeder pillar box/panel board/in door type, made out of ms sheet 3.0 mm thick and angle iron frame of size 50x50x6 mm 3 phase, 4 wire, 440 volts, ac, 50 hz with tpn copper bus bar of capacity 300 amps with pvc insulated colour code sleeves, mounted horizontally with porcelain insulators complete with volt meter 0-500 volts, ammeter with cts & selector switches,back up fuse, indicating lamps with toggle switches duly wired with proper colour code, lugs, gland, thimbles including locking arrngement & suitable foundation & pla...
|
Value :
INR 14.56 Lac
*
|
INR 1.45 Mn
*
|
Due Date :
18 Days to go
|
21/07/2022
|
|
TID :50687602
Delhi
|
|
|
8. Sector : Power Plant
Procurement of spares for turbines at dharasu power house
stud m76x400 mm for top cover & pivot ring, hex head nut, washer machined, stud, nut, bolt, ss flanged bolt, nrv, gun metal bush strip vertical, gun metal bush strip horizontal, bakelite ring.
|
Value :
INR 11.02 Lac
*
|
INR 1.10 Mn
*
|
Due Date :
15 Days to go
|
18/07/2022
|
|
TID :50567650
Uttaranchal
|
|
|
|
|
|
10. Sector : Coal and Lignite
Supply of stator, regulator, diode, gen stator, 1875645 gen. rectf.bridge, diode, bearing, race inner, lead and term, brush gear assy, brush spring, bushing, switch solenoid, bushing, washer, stud, alternater/armature, switch, stud, contact-assy, plate assy, armature, field coil, bushing, carbon brush, drive assy
|
Value :
INR 4.73 Lac
*
|
INR 4.73 Lac
*
|
Due Date :
10 Days to go
|
13/07/2022
|
|
TID :50431904
Chhattisgarh
|
|
|