Tender Detail with Corrigendum

Corrigendum - 1 Published On : 21/11/2019
Corrigendum Details :CORRIGENDUM NO 1
Corrigendum Type :BOQ
Corrigendum Document : Available Corrigendum Document For Download
Buyer/Seller : Can be viewed by Subscribers
Ref. Number : 37314988 Tender Number : 2019_MES_296185_1 Tender Prod. No : 2019_MES_296185_1
Requirement : Periodical services in tech area at af station - taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside mod land ,complete all as specified and directed by the engineer in charge. , rendering 12 mm thick on fair faces of brick work or concrete surfaces in cement mortar 16 finished even and smooth without using extra cement , complete all as specified and directed by engineer-in-charge. , rendering 5 mm thick on rcc ceiling surfaces in cement mortar 13 and finished even and smooth without using extra cement , complete all as specified and directed by engineer-in-charge. , rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 16 finished even and fair , complete all as specified and directed by engineer-in-charge. , rough cast plaster over and including 10 mm thick rendering coat in cement mortar 14 on fair faces of brick or concrete surfaces.complete all as specified and directed by engineer-in-charge., preparation of new plastered or un plastered wall surfaces of any description, using necessary filling compound of birla/ jk wall care putty to obtain smooth regular/ even finish using sand paper and applying two coats of oil bound distemper over a coat of chalk whitening primer, complete all as specified and directed by the engineer-in-charge, preparation of new plastered or un plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed by the engineer-in-charge., "preparation of new plastered wall surfaces and applying two coats of exterior acrylic emulsion paint overand including one coat of primer(antifungal) (in camouflage pattern using number of colours) , complete all as specified and directed by the engineer-in-charge., note pattern of camouflage shall be approved by ge., ", preparation of old surfaces of wall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc., and applying two coats of white wash, complete all as specified and directed by engineer –in-charge. , preparation of old surfaces of wall including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of oil bound distemper, complete all as specified and directed by engineer –in-charge. , preparation of old surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of oil bound distemper, complete all as specified and directed by engineer –in-charge. , preparation of old steel or iron surfaces of any description, exceeding 10 cm width or girth of any description and applying one coat of synthetic enamel paint over , complete all as specified and directed by engineer-in-charge., preparation of old wooden surfaces of any description, exceeding 10 cm width or girth of any description and applying one coat of synthetic enamel paint over , complete all as specified and directed by engineer-in-charge., demolition of brick work or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches , pillars etc & removing debries out of mod land, complete all as specified and directed by the engineer-in-charge. , brick work with fly ash bricks of size 23 cm x 11 cm x 7 cm conforming the requirement as specified in is-12894-2002, straight or curved on plan exceeding 6 metre mean radius in cement mortar (16), complete all as specified and directed by the engineer-in-charge., "brickwork with sub class 'b' bricks , straight or curved on plan not exc 6m mean raidus (except brick) built in cement mortar 16 , complete all as specified and directed by engineer-in-charge. , note servicable bricks retrived from serial item no - 14 above shall be used after proper cleaning and washing of old bricks.", "complete removal of existing treatment and applying multi colour rustic texture coating on walls including preparation of surfaces using wall care putty 1 mm thick complete all as per manufactures instruction, complete all as specified and directed by engineer –in-charge. , make of wall putty - jk / birla / kamdhenu or equvalent.", "complete removal of existing treatment and applying gravel finish texture including preparation of plastered surfaces using wall care putty 1 mm thick complete all as per manufactures instruction,complete all as specified and directed by engineer –in-charge. , make of wall putty - jk / birla / kamdhenu or equvalent.", dismantling floor, hearth or wall tilling including cement morter bedding (but not backing ),and removing serviceable tiles to store and rubbish off the premises , complete all as specified and directed by engineer-in-charge, first quality glazed ceramic coloured tiles of (300x200mm) x 7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in cm (14) set and jointed in neat cement paste of honey like consistancy and pointed in white or coloured cement to match the shade of tiles ,complete all as specified and directed by the engineer in charge. , first quality, joint less non skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sq.m but not exceeding 0.18 sq.m, laid in floors with neat cement slurry @ 3.00 kg/square metre over and including 15 mm thick screed bed of cement mortar (16) including pointing in coloured cement to match the shade of tiles,complete all as specified and directed by the engineer in charge. , "wash basins, vitreous china, white, flat back of size 550x400 mm with pedestal including brackets and cutting for and pinning in ends of brackets or erecting stand 32mm dia waste fittings, brass, chromium plated with long screwed shanks and fly nuts, 32mm dia hdpe waste pipe and including new brackets fixed as in repair , complete all as specified and directed by the engineer in charge. , make - cera/hindware/paryware.", pillar taps, 15 mm bore cast copper alloy chromium plated fancy type, with capstan heads, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly nuts, screwed for iron pipe fixed as in repair, complete all as specified and directed by the engineer in charge. , "aluminium anodised coloured powder coated partition wall made of aluminium frame of section 50 x 50 x 0.60mm thick including necessary jointing cleats, glazing clips, snap beading, screws, pvc packing, aluminium anodised fittings & fixture with and including 4.80mm thick tinted glass not exceeding 2.0 sqm in each pane with aluminmium frame with and including taking down of old partition wall of any descriptions complete all as directed by engineer-in-charge., make - hindalco / jindal or equvalent.", aluminium (die cast body) door closer hydraulically regulated, designation no. 3, universal type, suitable for door shutter of 851 to 1000mm width and of weight between 61 to 80 kgs and fixed as in repair, complete all as specified and directed by engineer-in-charge, hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling our glazing pins / spring clips providing and fixing new one , complete all as specified and directed by engineer-in-charge. , sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 sq. m in each pane, complete all as specified and directed by the engineer in charge. , galvanised mild steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks, or galvanised wire staples, fixed as in repa

Key Values

Document Fees : 500
EMD : 40,000
Tender Estimated Cost : 2,000,000
Closing Date : 29/11/2019
Document Sale To : 29/11/2019
Location : Rajasthan - India

Value Added Services

  • Get consortium partner
  • Get Winning Estimate
  • Track Tender Result
  • Get Subcontractors
  • Find Liaison Agency
  • Ask Expert

Disclaimer : Tender Tiger takes all possible care to ensure accurate & authentic tender information however it cannot be held responsible for Omissions, Errors, etc. Users are advised to refer to Tender Document published by Procuring entity before they take submit their actual bid.