|
Requirement :
|
Supply of materials - isi ppc cement brand birla samrat , jaypee etc, coarse sand, tmt tor steel bars of various dia (size 8-20mm) brand premier tmt fe-500 with binding wire, first class bricks, brick bats, glazed tiles, kota stone, vetrified tiles, stone gritt (10-20mm nominal size), stone ballast, local sand , acrylic smooth extarior paint of required shed, wall putty, enamel paint, cement primer of brand burger, j&n, asian paint or shalimaar, steel or wood priemer, mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing.hold fast for chaukhats of doors and windows., door / windows grill., z-section steel windows (openable), chaukhat (40x40x5), Supply stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc., , Supply stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)., flush doors commercial quality conforming to is 2202 (part i) 1983 including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fiting with necessary screws to be supplied departmentally. (a) both side laminated 35 mm thick including isi marked stainless steel butt hinges with necessary screws, Supply 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. To suit shutter thickness complete., Supply stainless steel sliding door bolts, isi marked anodised anodic coating not less than grade ac 10 as per is 1868), transparent or dyed to required colour or shade, with nuts and screws etc. Complete , Supply bright finished stainless steel tower bolts (barrel type) with necessary screws etc. Complete (a) 300 mm x 10mm , (b) 250 mm x 10mm , Supply bright finished stainless steel handles with screws etc. Complete (a) 125 mm, glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes, light cinder filling under floor of toilets & other sunken roofs., Supply in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of t-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer., anodized aluminium door, having 2 mm thick aluminium section excluding coating & an average coating of 20 micron fully glazed made of aluminium door tube size 83.5 x 44.65 meter as vertical member and 1140 x 44.45 mm size tube in bottom & horizontal member door chaukhat should be aluminium tublar vertical with two openable shutter, the rate will be including cost of material fixtures 4 mm glass handles locks screw necessary bending & excluding cost of floor spring if required for proper completion of the work. As per the direction of engineer-in-charge. Same as above but 5.00 mm thick plain glass complete. (for winodw & ventilators), Supply aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is 733 and is 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. At top, bottom and sides with required epdm rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. Brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, paneling and dash fasteners to be paid for separately) anodised aluminium (anodised transparent or dyed to required shade according to is 1868, minimum anodic coating of grade ac 15) supply and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. With epdm rubber / neoprene gasket etc. Complete as per the architectural drawings and the directions of engineer-in-charge. With float glass panes of 4.0 mm thickness supply wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). (a) sal wood , Supply anodised aluminium grill (anodised transparent or dyed to required shade according to is 1868 with minimum anodic coating of grade ac 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with c.p. Brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of engineer-in-charge. (only weight of grill to be measured for payment)., roller blinds in window., interlocking pavers, Cost of electrical work as per details attached, Cost of fire fighting as per details attached, Cost of internal plumbing as per details attached, Cost of external plumbing as per details attached, Cost of boring work as per details attached.
|