Tender Detail with Corrigendum

Corrigendum - 1 Published On : 25/02/2020
Corrigendum Details :TENDER FEES CHANGED
Corrigendum Type :Fee
Corrigendum Document : Available Corrigendum Document For Download
Buyer/Seller : Can be viewed by Subscribers
Ref. Number : 38788211 Tender Number : 2020_SSAR_178150_13 Tender Prod. No : 2020_SSAR_178150_13
Requirement : Construction of civil work - "earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. , all kinds of soils ", providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level.148 (1 cement 4 coarse sand 8 graded stone aggregate 40 mm nominal size). , brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth with cement mortar 1 6 (1 cement 6 coarse sand), centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. , "providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. , m25 grade nominal mix / design mix ", supply & stacking good earth at site complete including loading unloading & transporation etc & filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift., brick work with non modular flyash brick conforming to is 12894-2002 of class designation 10.0 in superstructure above plinth level upto floor five level in. cement mortar 1 6 (1 cement 4 coarse sand) , roof slab & beams - centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc., columns - centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for columns, pillars, posts and struts etc., "roof slab & beam - providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc., m20 grade nominal mix / design mix ", "providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 13 (1 cement 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc., m25 grade nominal mix / design mix ", providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.cold twisted deformed bars (is 1786), costruction of foundation / inaugration pedstal in 35 cm thick brick masonary in cm 14 of size 1.40 m x 1.80 m above ground level with 0.30 m deep foundation in 46 cm thick brick masonary and 0.10 cm thick pcc 136 including providing and fixing granite stone of size 0.90m x 0.60 m with engraving letters and figures , 20 cm cement plaster in cm 14 , white washing etc.complete as per direction of engineer-in-charge., providing and fixing t-iron frames for doors, windows and ventilators of mild steel tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 136 (1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.door and chokhat 40 x 40 x 5 mm, providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 136 (1cement 3 coarse sand 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required partly fixed and partly openable [ fixed area not to exceed 33%], p&f m.s. sheet double leaf door shutter in angle iron frame 35 x35 x 5mm suitability diagonally braced with 25*3mm flat iron above and below lock rail of size 50 x 5mm beading extra including all fittings as per direction of chokhats but excluding cost of chowkhats (bsr b96/ 9.26.1 + 9.26.5)18 swg ms sheet, providing and fixing square bars or other flat welded to window, ventilatiors etc., providing and fixing welded mesh/expanded metal mesh in frame work, flat iron beading 20x3mm including top cross laps inside and out sides welding, iron bolts, crews, clips etc. complete (excluding frame work) of size. welded mesh 50 mmx 50 mm x 2.1 mm, dry brick on edge flooring in required pattern with bricks of class designation 75 on a bed of 12 mm mud mortar including filling joints with river sand complete. , "providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix , 1 3 6 (1 cement 3 coarse sand 6 graded stone aggregate 20mm nominal size).", 6 mm cement plaster to ceiling of mix 13 (1 cement 3 corse sand), internal plaster--plaster on new surface on walls in cement sand mortar 16 including racking of joint etc. complete fine finished. 12mm thick (bsr item b-136 / 12.9.3), external plaster -plaster on new surface on walls in cement sand mortar 16 including racking of joint etc. complete fine finished. 20 mm thick , making grooves as per design in plaster 10mm to 20mm wide , kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 4 (1 cement 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm, kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 13 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2000 sq

Key Values

Document Fees : 500
EMD : 59,920
Tender Estimated Cost : 2,996,000
Closing Date : 2/03/2020
Document Sale To : 02/03/2020
Location : Rajasthan - India

Value Added Services

  • Get consortium partner
  • Get Winning Estimate
  • Track Tender Result
  • Get Subcontractors
  • Find Liaison Agency
  • Ask Expert

Disclaimer : Tender Tiger takes all possible care to ensure accurate & authentic tender information however it cannot be held responsible for Omissions, Errors, etc. Users are advised to refer to Tender Document published by Procuring entity before they take submit their actual bid.