Tender Detail with Corrigendum

Corrigendum - 3 Published On : 11/05/2020
Corrigendum Details :date extension
Corrigendum Type :Date
Corrigendum Document : Available Corrigendum Document For Download
Corrigendum - 2 Published On : 20/04/2020
Corrigendum Details :Date extension
Corrigendum Type :Date
Corrigendum Document : Available Corrigendum Document For Download
Corrigendum - 1 Published On : 28/03/2020
Corrigendum Details :Date Extension
Corrigendum Type :Date
Corrigendum Document : Available Corrigendum Document For Download
Buyer/Seller : Can be viewed by Subscribers
Ref. Number : 39200374 Tender Number : 2020_ARMY_334836_1 Tender Prod. No : 2020_ARMY_334836_1
Requirement : Supply of steel fabrication items - srt 2400mm long 615mm wide, 2mm thick isi mark hot rolled carbon steel sheets alongwith 08 nos of capsule shaped hole having 10mm dia and 20mm length make sail/tata/ispat/ jindal pre painted with two coats of og colour over one coat of red oxide., srt 1800mm long 615mm wide, 2mm thick isi mark hot rolled carbon steel sheets alongwith 8 nos of capsule shaped hole having 10mm dia and 20mm length make sail/tata/ispat/jindal pre painted with two coats of og colour over one coat of red oxide., "ismb 250(3400 mm long) , make sail/tata//ispat/jindal conforming to is-226 pre painted with two coats of og colour over one coat of red oxide.", "ismb 250 (2700 mm long) , make sail/tata//ispat/jindal conforming to is-226 pre painted with two coats of og colour over one coat of red oxide.", "ismb 150 (1500 mm long) , make sail/tata//ispat/jindal conforming to is-226 pre painted with two coats of og colour over one coat of red oxide.", "ismb 150 (1200 mm long) , make sail/tata//ispat/ lloyd/ jindal conforming to is-226 pre painted with two coats of og colour over one coat of red oxide.", loop holes of size 1000 x 750 mm will be provided with purpose made ‘u’ channel frame. a trapezoidal frame shall be made of angle iron 50x50x6 mm, 45x45x6mm and flat iron 40x6 mm covered with 2mm thick ms sheet from inside on four sides except outer and inner opening with 4 nos hold fast size 200x50x6 mm flat iron two on either side with 02 x ms door made of 8 mm thcik ms plate 500 x 730 mm with sliding slit of 75 x 75 mm on one door. the doors should be fixed with required nos of heavy duty box hinges of 10mm size. with the dimension of the outer opening of the loop hole box being 1300 x 1050mm. ms tower bolt 2 nos 16mm dia 200 mm long to be provided to shut the doors. the doors should be opening inside with locking arraggement in the form of hook to prevent the door from closing back again shenever required. edges of the loop holes to be chamfered evenly. all steel parts shall be confirming to is-226 & pre painted woth two costs of og colour over one coat of red oxide. make sail/tata//ispat/ jindal brand iron parts to be used for the loop hole fabrication. , steel door of size 900x1800 mm shall be provided as per drawing. main frame work shall be of ms angle 50x50x6 mm. ms sheet 2 mm thick shall be provided as cladding of the door with flat iron 25x4 mm bracings including locking arrangements on both sides of the shutters. the door shall be open-able inwards. the door shall have sliding opening 900mm x 250mm made of 14 guage ms sheet with knobs, with 01 nos 12mm dia guard bar at 1200 mm from bottom. necessary handles and other fittings will be provided both sides of door. the door frame will have 06 nos hold fast 200 mm long made of 50x6 mm flat iron. job no will be engraved on the inner side. door will be attatched to the frame work with the help of 03 x hinges, fitted with nuts and bolts. both framework and door will have the flexibility to put hinges on either side of the frame. all steel parts shall be conforming to is-226 and pre painted with two coats of og colour over one coat of red oxide. sail/tata/ispat/jindal brand iron parts to be used for the door fabrication., 10 mm dia bolts with nut & bitumen washer 150mm long with isi mark for fixing srt make sail/tata//ispat/jindal, ms pipe 3" dia 1000mm long medium grade welded with 100x100x4mm thick ms plate welded on both side isi mark. make – sail/tata/ispat/ jindal , ms plate 100mm wide,1350mm long and 4mm thick, prefabricated frame of size 1350x1350x75mm made using 50mm x 50mm x6mm ms angles and 2 mm thick ms sheets fitted on five sides (top side open) having 12 nos of 10 mm dia deformed distribution steel bar (6 nos on either side) fixed at centre of the frame, so that concrete 124 can be poured into it and a slab can be made., ms deformed 8 mm dia / tmt bars make sail/tata//rinl/srmb/jay balaji/shyam steel/ ispat/jindal with isi mark.(i) 3000mm long - 9nos (ii) 2700mm long - 06 nos (iii) 1800mm long - 03 nos (iv) 1200mm long - 18 nos (v) 400mm long - 120 nos, construction and hardware stores for mana and malari loc, cement in polythene bags 50 kgs each grade 43 opc , is-8112-1989 make grasim/ultra tech/ambuja/jay pee/j k/acc, sand coarse (as per sample), stone agg 20 mm graded (as per sample), "quick setting compound , make aqualac/jk/vikram/cicco", "water proofing compound confirming to is-2645-1975. , make duroseal/imperial", pbs roll is 1322-62 weight min 46 kgs per roll and minimum length 20 mtr and 1 mtr wide with adhesive make shalimar/macefelt/iwl chennai/national , hdpe sand bags with thin plastic inner, length - 630mm & width -150mm & weight - 80 gms minimum, jute bag length - 630mm & width 150mm with sand colour or green colour., paint disruptive og colour ist quality. make asian/shalimar/berger, paint disruptive dark brown colour ist quality. make asian/shalimar/berger, "paint enamel destruptive sand colour 1st quality , make asian / shalimar/ berger", "bitumen primer as per is-8982 , make asian/jonson/nicholson / stp ltd", "primer red oxide as per , is-8982 make asian/shalimar/berger", thinner/turpentine oil branded and supply in air tight container make asian/berger/j & n ltd/shalimar, hessian cloth of sand colour, 93cm wide and minimum weight not below 140gm per running meter, polythene sheet colorless and weight of sheet shall not be less than 50 gm/sqm, polythene sheet black and weight of sheet shall not be less than 70 gm/sqm, pvc conduit pipe 20 mm dia make shalimar/dauphin/presto plast, lightening conductor (jelly filled)complete set make radiance powercon/ennov/ashlok (1 set having fwg accessories) ',(a) prong complete set made out of alumn conduct 20mm dia 450mm long along with stand/base plate with minimum thread 1"isi mark - set-01, (b) wooden block size 150x150x120mm - nos-10 , (c) aluminium strip 25mm x 3.15mm wide with fixing screws for roof conductors.of isi mark- mtr- 30,(d) clamp for fixing of aluminium strip with wooden block nos-40, (e) chemical earthing electrode inner dia 40mm, lenth 2000mm, conductor size 25 x 3mm, wt of back fill comound 25 kg, load bearing capacity 50kva, make radiance powercone nos-01, (f) ci s cover and pit - nos-01, ms binding wire 0.9mm dia. , cover water proof 225 sqft make shalimar/century, tools for mana and mana and malari loc, crowbar hexagonal 1200mm long x 40mm dia make taparia/tata/jindal, shovel hand gs 12” 1.6 kg with handle pointed, axes picks 3 kg head with 02 x addl spare rubber grip handle per axes make aparia/tata/jindal, cross and straight peen hammer 500 gm with 02 x addl spare rubber grip handle per hammer , sledge hammer 4 kg with grip handle., ball pane hammer 500 gm with isi mark, with with 02 x addl spare rubber grip handle ball pane per hammer , phawrah 11" x 11.5" x 8.5" , 1.5 kg with with 02 x addl spare handle make taparia/tata/jindal, pan motor (tasla) 18” dia, trowel brick 250mm make taparia/tata/jindal, wooden gurumala, steel gurumala 152mm with rubber grip make taparia/tata/jindal, plum bob steel make taparia/tata, chiesel cold 2kg make taparia/tata/jindal, scissor of size 300mm long for cutting of pbs roll make tata/sail, drill machine make bosch/taparia / tata, "set of bits for drill machine gsr12-2 professional , consisting of 10 bits make taparia/bosch/tata, ", plier side cutting make taparia/everest/pye, spirit level 10” (03 x axes), hand gloves rubber, working gloves, working goggles, safety helmet , water level pipe for masonry work, mason thread 100 mtr long roll, wire mesh for sieving sand (8’x5’) with 20 runing feet of wood scantling for on site fabrication of mesh frame, rope 1"dia 50 mtr roll (jute rope), adjustable spanner 10" make taparia/ everest/fischer, spanner ojde 14 x15 mm, hdpe water tank 500 ltrs make syntex/sfmc/national plastic, aluminium stud 6'

Key Values

EMD : 169,000
Tender Estimated Cost : 3,378,914
Closing Date : 19/05/2020
Document Sale To : 28/03/2020
Location : Multi State - India

Value Added Services

  • Get consortium partner
  • Get Winning Estimate
  • Track Tender Result
  • Get Subcontractors
  • Find Liaison Agency
  • Ask Expert

Disclaimer : Tender Tiger takes all possible care to ensure accurate & authentic tender information however it cannot be held responsible for Omissions, Errors, etc. Users are advised to refer to Tender Document published by Procuring entity before they take submit their actual bid.