|
Requirement :
|
Supply of various equipment - x – ray viewing lobby (4 film view) , view boxes, view boxes shall be easy to install , design shall be slim i.e 2.5cm or 3 cm thick., it should have led lamps. , the thermometric scale of the light source should be over 9000 degrees of kelvin., the panel shall be made of acrylic., there should not be any dark spot in the viewing area., it should have built-in electrical source., dimension w×h×t(mm) 1640×545×25, visual size w×h (mm) 1500×440, type of light source high luminance led, 100000 hours, on/off control individual panel on/off control., film activation switch, stop watch, stop watch reading at 1/5 second. - electronic with alarm settings upto seconds with battery, anthropometric set , folding metal rod upto 7 ft - metallic non-rust, standardized, graduated, up to 7 ft., osteometric board, craniometer, mandibulometer, goniometer, vernier calipers, equipment for reporting height, weighing machine dial type human, digital spectrophotometer, range 340 to 960 mm with facility for automatic concentrating % transmission and u.d. measurement and u.d. measurement wavelength resolution 5 mm 3.1/2 digital led display with round test tube, chemical balance, digital single pan sensitive chemical balance, 0.1mg accuracy, hack saw(stainless steel), it shall be made of high carbon steel blades made at hrd to 52 degrees., blades shall be antirust, hard and durable., blades shall be chrome plated., shall be iso certified, distillation plant - , manesty type made of stainless steel , electrically operated ,approx. output 3/4 liter ., brain knife , shall be autoclavable and chemical resistant., it shall be made of stainless steel and both edges of the blade shall be sharp, so as to prevent the damage to the tissue, simple s.s. stretcher trolley for cadever transport - , it shall be made of strong steel tubular frame work of trolley mounted on four 150mm diameter swiveling castors. , it shall have removable stretcher top made of s.s. sheet (18 gauze) supported on tubular frame. , the frame shall be pre treated and epoxy powder coated. , over all approximate size2030mm(l)x560mm(w)x820mm (h)., company shall be iso certified., slide warming table -, thermostatically controlled. uniform temperature from room to 80 0 c top made of anodized aluminum /stainless steel. 40x25cm, rectangular hot plate , use to heat glassware or its contents, durable cast iron heating element that heats up fast, thermostatic control from simmer to boil, durable and easy to clean spray plastic finish, variable heat control, stainless steel body with top having the diameter 30 cm, temperature and working indicator light, maximum surface temperature 300 c, shall be ce certified, glass cutting pencil, spectroscopic lens with adjustable slit - spectroscope, small instrument to view and measure spectral lines from various light, sources. light enters through a single adjustable slit, is focused with a lens and then dispersed through a system of glass prisms to produce a spectrum of colors., stethoscope, double bell, shall be ce certified, digital bp instrument, the instrument shall be led based/digital, shall be iso certified, automatic tissue processing machine - , a sturdy and elegant equipment for complete automatic processing of tissues starting from dehydration upto final fixing in wax. equipped with latest micro – switches mechanism for trouble free performance & convenience. supplied with following accessories., 1. wax bath (thermostatically controlled), 2. stainless steel basket – 1, 3. tissue containers – 24, 4. specimens beakers (1 litre) with cover – 10, 5. calibrated discs with 24 hour times, 6. basket rotor – 1, 7. tissue capsule stainless steel 12 nos. fitted with digital timer., weighing machine for organs digital - , (a) 304 ss platform - anti-staining & cleaning 18-20 gauge, (b) platform size 350 mm x 350 mm approx., (c) to weigh maximum of 20 kg., (d) rechargeable battery back-up, (e) tare function provided, (f ) digital display with bright led with electric cord of 10 metres, weighing machine for fetus digital , easy to operate. , rugged construction. , large weighing pan. , could be used for a weight up to 15 kilograms., paraffin embedding system. , it should have single module design., it should be electronically controlled for dependability and performance., the heating function shall be controlled by accurate digital thermostat, it should have low and flat work-surface., it should have atleast 4-liter capacity paraffin reservoir., it should have forceps warmer and illuminated paraffin dispenser., it should have warming oven with removable shelf and double hinged lid., it should have wax bath complete with drainage shelf, debris screen, and hinged lid., it should have heated work area which provides a flat working surface with the excess paraffin draining under the surface into the wax bath; , it should have hand and foot switch for activating the dispensing head., it should have bright illuminations for convenient working., it should have cold plate of area in range of 165-175 sq. in. of efficient refrigerated cooled working, surface with removable stainless steel drainage tray beneath., it should have touch-pad for easy temperature setting and monitoring., the various dimensions are accepted with a standard deviation of 5%., height of work surface work stage 2.75"(7cm) above countertop, wax reservoir dimension (approx) .75"(l) x 4.75"(w) x 4"(d) (19.5 x 12 x 9.5cm), wax bath dimension (approx) 10.25"(l) x 8.5"(w) x 1.75"(d) (26 x 21.5 x 4cm), warming oven dimension (approx) 6.5"(l) x 7.5"(w) x min 2.5" max 6" (14 - 16.5cm), cold plate dimension (approx) 11.75"(l) x 14.5"(w) (29.5 x 36.6cm), it should have temp ranges with one sided standard deviation of -2°c, wax reservoirs 40° - 70°c. work surface 40° - 70°c , wax bath 40° - 70°c , it should have cold plate working surface ambient to -5°c, it should be ce certified., accessories, spares and consumables, spare bulb - 3, thermostats - 1, power input to be 220-240vac, 50hz, hand set heat sealer, shall work on 220 volts, the length of healted iron plate shall be at least 1 foot, rectal thermometer, rib shear left & right - made of ss ( set complete), measuring tape( steel tape roll) - standard, magnifying lens - with classic design and large viewing area with handle, tooth extractor left & right ( set complete), l moulds, block holder, abrasive powder (standard pack) related to forensic department for 100 seated medical college, bharatpur and bhilwara.
|