|
Requirement :
|
Supply of material supply for construction of anganwadi no 58 - stone for masonry work, through and bond stone size 24 x 24 x 39cm, sundries, portland cement, coarse sand (zone iii), wall form panel 1250x500 mm, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 10 mm nominal size, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone aggregate(single size) 40 mm nominal size, solid blocks of size 30x20x15cm, second class kail wood in planks, second class kail wood in scantling, hollock ballies 125 mm diameter, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m (2.02-3.75m), safeda ballies 125 mm diameter, twisted steel/deformed bars, anjili wood scantls, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile, 35 mm thick factory made solid panel pvc door shutter of single piece extruded profile non decorative finished (matt finished), powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, fine sand (zone iv), mild steel round bar above 12 mm dia, flats up to 10 mm in thickness, iron hooks & eyes 100 mm, 200 mm aluminium aldrop, anodised aluminium sliding door bolt 300x16 mm, chromium plated brass screws 25 mm, pvc pipe 63 mm outer dia. 4 kgf/cm2, polyethylene water storage tank with cover and suitable locking arrangemnet, vitreous china flat back wash basin 630x450 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 110 mm outer dia 6kgf/cm2, pvc pipe 20 mm outer dia 10 kfg/cm2, black plastic seat (soild) with lid c.p.brass hinges and rubber buffers, vitreous china pedestal type wate closet, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, vitrified floor tile 50x50 cm, pink primer (for wood), synthetic enamel paint in black or chocolate shade, deharadun white lime, acrylic exterior paint, exterior primer.
|