Requirement :
|
Supply of material - stone for masonry work, royalty for good earth, laterate stone of size 40x20x15cm, portland cement, coarse sand (zone iii), hollow bloks oof size 40x20x10cm, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 10 mm nominal size, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone aggregate(single size) 40 mm nominal size, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), wall form panel 1250x450xmm, corner angle 45x45x5 mm 2.50 long, column clamp 450x1070 mm, prop 2 m (2-3.5m), adjustable span eso+si (2.35-3.40), twisted steel/deformed bars, fine sand (zone iv), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, anjili wood scantls, anjili wood planks, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, mild steel round bar above 12 mm dia, flats up to 10 mm in thickness, oxidised mild steel tower bolt (barrel type) 200x10 mm, oxidised mild steel screws 30 mm, 200 mm aluminium aldrop, iron hooks & eyes 100 mm, brass 100 mm mortice latch and lock with 6 levers without pair of handles, pair anodised aluminium lever handles for 100 mm mortice latch and lock, anodised aluminium handles 125 mm with plate 175 x 32 mm, chromium plated brass screws 25 mm, polyethylene water storage tank with cover and suitable locking arrangemnet, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm, c.i. bracket for wash basin and sinks, semi rigid pvc waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c pvc waste fittings, pvc pipe 50 mm outer dia.6kgf/cm2, pvc pipe 63 mm outer dia. 4 kgf/cm2, pvc elbow 63 mm dia, pvc 45 degree elbow 63 mm dia, pvc door elbow 63 mm dia, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, deharadun white lime, plastic emulsion paint, epoxy paint, premium acrylic emulsion of interior grade, having voc content less than 50 gm/litre for the construction of velambatta aganawadi building at edakkad (ward 09).
|