Tender Detail with Corrigendum

Corrigendum - 1 Published On : 02/02/2021
Corrigendum Details :Corrigendum1
Corrigendum Type :Date
Corrigendum Document : Available Corrigendum Document For Download
Buyer/Seller : Can be viewed by Subscribers
Ref. Number : 42170570 Tender Number : 2020_WAPCO_65402_1 Tender Prod. No : 2020_WAPCO_65402_1
Requirement : Procurement, supply and commissioning of 04 nos. heavy duty direct circulation rotary rigs of 500 meter well construction capacity drill pipes of nc 50 tool joints (4½” if) of size 127mm (5”), external upset, grade e. range one 6.1 m (20 feet) long, weight 24.7 kg/m with steel thread protectors., drill pipes 88.9 mm (3.5 in), nc 38 if tool joints, external upset, grade e, ranqe one 6.1 m (20 feet) lonq, weight 19.8 kg/m with steel thread protectors., triple sheave travelling block with single latching hook, capacity not less than 500 kn, 152 mm (6 in) x 7.50 m (25 ft) long suction hose with fittings, strainer, and foot valve, 76.2 mm (3 in) x 10 m (33 ft) long high pressure wire braided swivel hose complete with fittings and mud mixing gun., drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 203.2 mm x 6.1m (8 in x 20 ft), 167.3 mm (6-5/8 in) rh reg threads with steel thread protectors, drill collars made of aisi 4145 h chromium molybdenum alloy steel and are fully heat treated to a brinell hardness range of 285-341 of size 158.8 mm x 6.1m (6-1/4 in x 20 ft), 88.9 mm (4½ in) rh reg threads with steel thread protectors, kelly saver sub box to pin (4½" if) made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 (each size drill pipe - 2 nos), box (4½” if rh) to pin (3½ if rh) sub for kelly saver to 88.9mm drill pipe, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75cm., box (4 ½” if rh) to pin (4½” if rh)sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341. length approximately 75m., box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (4½” reg rh) to box (4½" reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, pin (6 5/8” reg rh) to box (6 5/8” reg rh) sub made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (4½” if rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 203.2mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4½” if rh) to pin (6 5/8” reg rh) sub for joining 114.3 drill pipe and 158.8mm drill collar, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, sub for attaching fishing tools (si. no 79 to 87) with 88.9mm drill pipe (one set will contain two number of subs for each different size to fishing tools joints), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½" reg rh connection) x box (4 ½” reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (6 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box (4 ½” reg rh connection) x box (7 5/8” reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box 3 ½” if, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box 6 5/8” reg rh connection to box ( 6 5/8" reg rh), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, box 6 5/8” reg rh connection to box (7 5/8" reg rh) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285- 341, pin (4 ½” regular rh connection) to box (3 ½” if rh connection), made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341 sub, box (4 ½” if connection) to box (4 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (4 ½” if connection) to box (3 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, box (3 ½” if connection) to box (3 ½” if) sub, made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, any other size sub required for forming drill string, and shall be made of aisi 4140/ 4145h alloy steel and are fully heat treated to a brinell hardness range of 285-341, type c rotary tong, 60.3 mm x 273 mm (2-3/8 in x 10-3/4 in), complete with lug jaws, spare lug jaws with springs, tong die (100 nos each), rol pin i.e tong die retainer (24 nos each) for above type c rotary tongs 60.3 mm x 273mm (2-3/8 in x 10-3/4 in), heavy duty center latch elevator (minimum 900 kn) for 114.3 mm drill pipe size, heavy duty center latch elevator(minimum 900 kn) for 88.9mm drill pipe size, slips for 114.3 mm (4-1/2in) drill pipes complete with inserts, slips for 88.9 mm (3.5 in), complete with inserts. number of slips required for complete drill pipe is one set, slips for 158.8 mm drill collars (sl. no 8) complete with inserts. number of slips required for complete drill color is one set, slip for 203.2mm drill collar (si. no 7) complete with inserts. number of slips required for complete drill collar is one set, spare inserts for above, number of inserts required for each complete slips is one set. (sl. no. 34 to 37), slip complete with inserts for 355.6 mm (14 in) casing pipe, casing slip complete with inserts 323.9 mm (12-3/4 in), casing slip complete with inserts 273 mm (10-3/4in), casing slip complete with inserts 219 mm (8-5/8in), casing slip complete with inserts 168.3 mm (6-5/8 in), casing slip complete with inserts 141.3 mm (5-1/2in), casing slip complete with inserts 141.3 mm (5-1/2in), spare inserts for above. 4 sets. number of inserts required for each size of casing slip is one set., elevator for 355.6 mm (14 in) casing pipe of minimum 900 kn capacity (100 mt) (side latch), casing elevator 323.9 mm (12-3/4 in), minimum 900 kn capacity (100 mt) (side latch), casing elevator 273 mm (10-3/4in), minimum 900 kn capacity (100 mt) (side latch), casing elevator 219 mm (8-5/8in)), minimum 900 kn capacity (100 mt) (side latch), casing elevator 168.3 mm (6-5/8 in)), minimum 900 kn capacity (100 mt), casing elevator 141.3 mm (5-1/2in) minimum 900 kn capacity (100 mt), casing elevator 114.3 mm (4-1/2in)), minimum 900 kn capacity (100 mt), safety clamp range 95.25 mm to 371.48 mm (6” to 14-5/8 in) complete with box and wrench along with additional two set spare inserts for each size of safety clamp, casing spider, bushes, table complete set to handle casing ranging 88.9 mm (3-1/2in) to 355.6 mm (14 in), lifter spider bushing, lifter for rotary bushing, lifting sub for handling 203.2 mm drill collar in singles. neck of lifting sub should be able use with drill pipe elevator, lifting sub for handling size 158.8 mm drill collar in singles. neck of lifting sub should be able use with drill pipe elevator, suitable links for elevator of above various sizes as mentioned in si. 47 to 53 to handle casings, drill pipes, drill collars. (one set shall contain two links of each size), kelly bush for driving the kelly, roller for kelly bushes with bearing, bits, steel tooth rr drill bit 215.9 mm (8-1/2 in) two each of iadc 121, iadc 211, and iadc 311, steel tooth rr drill bit 250.8 mm (9-7/8 in) two each of iadc 121, iadc 211 and iadc 311, steel tooth rr drill bit 311.15 mm (12-1/4 in) two each of iadc 121

Key Values

EMD : Rs. 7,627,118
Tender Estimated Cost : Rs. 381,355,900
Closing Date : 13/02/2021
Location : Delhi - India

Value Added Services

  • Get consortium partner
  • Get Winning Estimate
  • Track Tender Result
  • Get Subcontractors
  • Find Liaison Agency
  • Ask Expert

Disclaimer : Tender Tiger takes all possible care to ensure accurate & authentic tender information however it cannot be held responsible for Omissions, Errors, etc. Users are advised to refer to Tender Document published by Procuring entity before they take submit their actual bid.