Tender Detail with Corrigendum

Corrigendum - 1 Published On : 31/05/2022
Corrigendum Details :Deadline has been changes from May 28 2022 12:00AM to Jun 1 2022 12:00AM
MGNREGS RETENDER
Corrigendum Type :Date
Corrigendum Document : Available Corrigendum Document For Download
Buyer/Seller : Can be viewed by Subscribers
Ref. Number : 49541723 Tender Number : 2022_DP_488656_1 Tender Prod. No : 2022_DP_488656_1
Requirement : Supply of material supply of various mgnregs works - quarry waste, stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 10 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), wall form panel 1250x500 mm, corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, coir pith compost, foundations,footings, bases of columns, ect for mass concrete , stone for masonry work, fine sand (zone iv), interlocking c.c. paver block (80 mm thick, m-30), stone aggregate(single size) 06 mm nominal size, structural steel such as tees, angles, channels and r.s. joists, red oxide zinc chromate primer, adjustable span eso+si (2.35-3.40), adjustable telescopic prop 3 m (2.02-3.75m), stone aggregate(single size) 10 mm nominal size, twisted steel/deformed bars, through and bond stone size 24 x 24 x 39cm, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), solid blocks of size 30x20x20cm, average rate of mild steel round bars for reinforcements, stone aggregate(single size) 06 mm nominal size, mild steel round bar 12 mm dia and below, flats up to 10 mm in thickness, mild steel round bar above 12 mm dia, hollock wood in planks, kiln seasoning of timber, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, mild steel tubes hot finished welded type, welding by electric plant, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, galvanised steel j or l hooks 8 mm dia, bitumen washer, g.i. plain washer thick, precoated aluminium trafford sheet 0.450mm thick, polyethylene water storage tank with cover and suitable locking arrangemnet, vitreous china flat back wash basin 630x450 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, pvc pipe 15 mm outer dia. 12kgf/cm2, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, water proofing cement paint, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, wire nails, epoxy paint, hollow blocks of size 40x20x20cm, vitreous china orrisa type w.c. pan size 580 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), 100 mm s.c.i. trap with vent heel, vitreous china flat back wash basin 630x450 mm, 15 mm c.p.brass tap, c.p. brass waste 32 mm, c.i. bracket for wash basin and sinks, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., pvc pipe 15 mm outer dia 10kgf/cm2, pvc pipe 25 mm outer dia . 12 kgf/cm2, pvc pipe 110 mm outer dia 6kgf/cm2, factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile, deharadun white lime, pink primer (for wood), solid blocks of size 30x20x15cm, mild steel tubes hot finished welded type, pvc pipe 63 mm outer dia. 4 kgf/cm2, pvc pipe 50 mm outer dia.6kgf/cm2, aracanut post, gi trafford profile sheet 0.35mm thick, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, second class kail wood in planks, second class kail wood in scantling, safeda ballies 125 mm diameter, pvc pipe 40 mm outer dia. 6kgf/cm2, pvc pipe 63 mm outer dia . 6kgf/cm2, g.i pipes 50 mm dia, g.i. pipes 40 mm dia, pvc pipe 25 mm outer dia. 10kgf cm2, anjili wood scantls, galvanised steel corrugated sheets.

Key Values

Document Fees : 10,000
EMD : 100,000
Tender Estimated Cost : 56,750,000
Closing Date : 1/06/2022
Document Sale To : 28/05/2022
Location : Kerala - India

Value Added Services

  • Get consortium partner
  • Get Winning Estimate
  • Track Tender Result
  • Get Subcontractors
  • Find Liaison Agency
  • Ask Expert

Disclaimer : Tender Tiger takes all possible care to ensure accurate & authentic tender information however it cannot be held responsible for Omissions, Errors, etc. Users are advised to refer to Tender Document published by Procuring entity before they take submit their actual bid.