|
Requirement :
|
Supplying, erecting & marking fpmcb 40a to 63a in provided distribution board as per specification no. swswr/ mcb , supplying and erecting four pole metal clad on load change over switch 415v,100a erected on angle iron /gi frame complete, supplying, erecting & terminating xlpe armoured cable 1100 v. 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 swg) g.i. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. cb-lt/al, supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (dwc) of hdpe for enclosing cable below ground/road surface, to required depth complete., providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. ea-ep, supplying and erecting gi strip of required size used for earthing on wall and/or any other purpose with necessary gi clamps fixed on wall painted with bituminous paint in an approved manner with joints required. as per specification no ea-ep., supplying, erecting and commissioning of diesel generating set with alternator of 40 kva output continuous rating, 3 phase, 415 v, 50c/s 0.8 p. f. a.c a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable bhp at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited self-regulated, screen protected alternator with static excitation system running at 1500 rpm as per is 4722-2001 with voltage regulation +/- 5 %., supplying, erecting, testing and commissioning of microprocessor based amf panel suitable for diesel generating set of above 40 kva upto 50 kva capacity single/three phase, 230/415 volts, 50hz a.c. with all standard features, safeties etc as per specification no. genamf., making cement concrete foundation, providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, making riveted/bolted/welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. (for shed framing), providing and fixing plain zinc sheeting of 0.80mm thick (22b.w.g.) over the ridge hip orvall eyto galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(weight of 6.8 kilogram/sq.m.). (for shed roof),
|