Tender Detail

Buyer/Seller : Can be viewed by Subscribers
Ref. Number : 50357332 Tender Number : 2022_DM_385683_5 Tender Prod. No : 2022_DM_385683_5
Requirement : Supply rate for different type construction related materials - , seam bolts and nuts 6 mm dia and 25 mm long, stone aggregate(single size)63 mm nominal size, stone aggregate(single size)50 mm nominal size, stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)25 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 12.5 mm nominal size, stone aggregate(single size) 10 mm nominal size, stone aggregate(single size) 06 mm nominal size, cowdung, bamboo 25 mm dia 2.5 meter long, brick bats, wire brush , soft brush, portland cement, white cement , unslaked lime, moorum, mud (dry), cement primer , pink primer (for wood), white cement based putty , coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, mild steel square bars, structural steel such as tees, angles, channels and r.s. joists , flats up to 10 mm in thickness, flats exceeding 10 mm in thickness, mild steel plates, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, galvanished steel bolts & nuts 10 mm dia and 125 mm long round head with slots, mild steel bolts 6 mm dia and 25 mm long with hexagonal head , galvanished steel barbed wire, galvanised steel turn buckles, galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts, bolts and nuts up to 300 mm in length, bolts and nuts above 300 mm in length, stone for masonry work, stone for pitching 15 cm x 22.5 cm, stone dust, stone grit 6 mm and down size or pea sized gravel, crushed stone 2.36 mm to 12.5 mm size, g.i limpet washer, bitumen washer , g.i. plain washer for seam bolts, water proofing materials, welding by gas plant, welding by electric plant, wire nails, wire mesh (rabbit), diesel oil, g.i. pipes 15 mm dia, g.i. pipes 20 mm dia, g.i. pipes 25 mm dia, g.i. pipes 32 mm dia, g.i. pipes 40 mm dia , g.i pipes 50 mm dia, g.i. pipes 65 mm dia, g.i. pipes 80 mm dia, common burnt clay f.p.s. (non modular) bricks class designation 7.5, ms brackets / aluminium alloy brackets, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, mild steel tubes hot finished seamless type, red oxide zinc chromate primer , coloured inter locking c.c. paver block, circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socketed pipe 75 mm dia, upvc pipes (working pressure 4 kg / cm2 ) single socketed pipe 110 mm dia , upvc single equal tee (without door) 75x75x75 mm, upvc single equal tee (without door) 110x110x110 mm, upvc single equal tee (with door) 75x75x75 mm, upvc single equal tee (with door) 110x110x110 mmmm, upvc bend 87.50, 75 mm bend, upvcbend 87.50, 110 mm bend, upvc pipe clip 75 mm bend, upvc pipe clip 110 mm bend, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, c.p.brass bibcock 15 mm , c.p. brass long body bibcock 15 mm, c.p. brass stop cock (concealed) 15 mm, flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe), white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is 2556, ptmt pillar cock, ptmt push cock 15 mm dia, ptmt - liquid soap container of 400 ml capacity, ptmt - soap dish/holder 138x102x75 mm, turpentine oil, coloured inter locking c.c. paver block , ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, adhesive solvent cement, geotextile 120 gram per sqm membrane, acrylic exterior paint , premium arcylic exterior paint l, vitrified floor tile 60x60 cm, chlorinated polyvinyl - chloride (cpvc) pipe 15 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 20 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 25 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 32 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 40 mm outer dia, chlorinated polyvinyl - chloride (cpvc) pipe 50 mm outer dia, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, g i wire, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), pin vibrator, surface vibrator, generator 250 kva, tractor with trolley, water tanker 5000 ltr. capacity, water tanker 5 to 6 kl capacity, generator 100 kva/125, 1st class picked jhama bricks(traditional), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ) , soft rock metal, laterite boulder, fine sand, medium sand, coarse sand, bamboo (8cm-10cm dia) including fixing, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings , hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), loading unloading & stacking stone aggregate (above 40mm nominal size), loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material, stone screening type a (13.2 mm), stone screening type b (11.2mm) , 1st class traditional bricks (kiln burnt), loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, loading, unloading and stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced) cement pipes 1000, 1100 & 1200 mm dia, loading, unloading and stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced) cement pipes 1400 & 1800 mm dia, tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is 1786), tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is 1786), loading, unloading and stacking by manual means of steel , neem wood, other local wood, sisu/gamar wood , local sal wood, bright finished or black enamelled mild steel screws 40 mm, bright finished or black enamelled mild steel screws 20 mm, bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm, bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm, bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm, thermocol 12.5 mm thick., structural members of specified sections weighing less than -22.5 kg./m (e.g. joists, angle, channel sections conforming to is 226, is 808 & sp (6)- 1964), structural works in roof trusses etc. using joists, channels and angles of specified section (conforming to is 226, is 808 & sp (6)- 1964) weighing less than 22.5 kg/ m , m.s. structural works in roof trusses with tubular sections conforming to is 806-1968 & is 1161- 1998 (trusses spanning up to 12.00 m), m.s. structural with hollow sections (square or rectangular shape) conforming to is 806-1968 & is1161-1998) span up to 12 mtr, p.v.c. connector 15 mm dia 600 mm long , polythene waste fittings complete 32mm, waste pipe, with pvc coupling at one end fitted with necessary clamps 900 mm long , fly ash bricks(traditional), iron hasp bolt 250mm long, iron door ring 50mm d

Key Values

EMD : INR 5,000
Closing Date : 1/07/2022
Document Sale To : 01/07/2022
Location : West Bengal - India

Value Added Services

  • Get consortium partner
  • Get Winning Estimate
  • Track Tender Result
  • Get Subcontractors
  • Find Liaison Agency
  • Ask Expert

Disclaimer : Tender Tiger takes all possible care to ensure accurate & authentic tender information however it cannot be held responsible for Omissions, Errors, etc. Users are advised to refer to Tender Document published by Procuring entity before they take submit their actual bid.