Tender Detail

Buyer/Seller : Can be viewed by Subscribers
Ref. Number : 50442135 Tender Number : JOD2223WSOB00070 Tender Prod. No : JOD2223WSOB00070
Requirement : Installation of various electrical equipments at barkatullah khan stadium. .
* electric work wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel, function meter, aluminium (iec 60105 iso 209-1,2) / copper (iec 60028) bus bar, current transformer, cable, p.v.c. / xlpe insulated & p.v.c. sheathed un-armoured / armoured aluminium cable, xlpe insulated as per is7098/ii/85 h.t.cable, river sand, existing cable, loose soil trench including refilling of excavated earth,compaction of earth, making good the same complete, heat shrinkable, end termination kit, joint kit, p.v.c. / xlpe insulated & p.v.c. sheathed un-armoured / armoured copper cable, mcb with positive isolation, double wall corrugated pipe, chemical gel earthing system, earth strip, aluminium wound distribution transformer, steel structure with ms channel / angle / joist / ismb / sheet etc, earth work in excavation/ by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sum on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed, random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in cement mortar 16 ( 1-cement 6-sand). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m15 grade nominal mix 1 2 4 (1 cement 2 coarse sand 4 graded stone aggregate 40mm nominal size). plaster on new surface on wall in cement sand mortar 13 including racking of joints etc. complete fine finish 25 mm thick providing & fixing of ip 51 ( upto 500) v range volt meter on existing panel as per pwd specification for electrical works, making connection by pvc insulated copper conductor with pvc sleeves / channel etc. meter shall give true rms measurments, acc. ci 1.0 or better , with field programmable primary & sec. values pt(vt) primary upto 2000 kv. field-programmable high and low threshold values, meter shall compliance of is 13875 & iec 61236. as required. oem must have bis certificate and & shall have submit nabl / cpri / erda lab test reports before execution &all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .digital type, providing & fixing of ct operated direct reading type ip- 51 ampere meter on existing panel as per pwd specification for electrical works, making connection by pvc insulated copper, conductor with pvc sleeves / channel etc. ampere meter shall give true rms measurement, acc. cl 1.0 or better , measuring current range 50 ma to 6 a, with field- programmable primary and secondary values ct primary up to 15000 a, field-programmable high and low threshold values as required. compliant to is 13875, & iec 61326. oem must have bis certificate and & shall have submit nabl / cpri / erda lab test reports before execution &. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a", attached with this bsr . digital type confirming to iec 62053-21 below 500 a, supply and fixing of following accessories for moulded case circuit breaker (mccb) compatible to main mccb oem as per pwd specification for electrical works, conforming to is/iec 60947 p - 2 2003 including making connection etc complete in all respect. oem shall have submit nabl / cpri / erda accrediated lab type test certificate before execution. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . extended rotary handle, providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is13947- iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr.four pole isolator 63 a rating 80/100 a rating, supplying and making end termination with heavy aluminium lugs pin / ring type (as per is 8309 -1993 & is 8337-1976 duly crimped with crimping tool, pvc tape as per pwd specification for electrical works etc of following size. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr 16.0 sq.mm.

Key Values

Tender Estimated Cost : INR 1,913,856
Closing Date : 1/07/2022
Location : Rajasthan - India

Value Added Services

  • Get consortium partner
  • Get Winning Estimate
  • Track Tender Result
  • Get Subcontractors
  • Find Liaison Agency
  • Ask Expert

Disclaimer : Tender Tiger takes all possible care to ensure accurate & authentic tender information however it cannot be held responsible for Omissions, Errors, etc. Users are advised to refer to Tender Document published by Procuring entity before they take submit their actual bid.