Tender Detail

Buyer/Seller : Can be viewed by Subscribers
Ref. Number : 52175490 Tender Number : 2022_DP_502966_1 Tender Prod. No : 2022_DP_502966_1
Requirement : supply of material - stone aggregate(single size) 40 mm nominal size, stone aggregate(single size)20 mm nominal size, stone aggregate(single size) 10 mm nominal size, stone aggregate(single size) 6 mm nominal size, coarse sand (zone iii), portland cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), stone for masonry work, twisted steel/deformed bars, solid blocks of size 30x20x15cm, fine sand (zone iv), water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, acrylic exterior paint, exterior primer, flats up to 10 mm in thickness, welding by electric plant, red oxide zinc chromate primer, structural steel such as tees, angles, channels and r.s. joists, adjustable telescopic prop 3 m (2.02-3.75m), beam clamp 300-380 mm (450-1070 mm), aracanut post, bamboo/kallanmula, g.i pipes 50 mm dia, g.i. pipes 40 mm dia, gi trafford profile sheet 0.35mm thick, stainless steel screws 50 mm, pvc bend 63 mm dia, pvc tee 63x63x63 mm dia, pvc end cap 63 mm dia, pvc elbow 63 mm dia, pvc pipe 63 mm outer dia. 4 kgf/cm2, pvc reducer 63x50 mm dia, pvc vent cowl 63 mm dia, polyethylene water storage tank with cover and suitable locking arrangemnet, wall form panel 1250x500 mm, 100 mm channel shoulder 2.5 m long, double clip (bridge clip), single clip, m.s. tube 40 mm dia, solid blocks of size 30x20x20cm, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, roofing paint for iron sheets in red colour, galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, wire nails, mild steel plates, mild steel rivets, 20 mm dia holding down bolts, quarry waste, corner angle 45x45x5 mm 1.50 m long, bamboo 25 mm dia 2.5 meter long, separation membrane of impermeable plastic sheeting 125 micron thick, boulder 50mm to 200mm, crates made of mesh type 10x12 (d=100mm) zinc coated (mash wire diameter 3.00 mm), green net 75% shade, polyurethene bags, royalty for good earth, interlocking c.c. paver block (80 mm thick, m-30), precast chequered cement tiles 22 mm thick dark shade using ordinary cement, mild steel tubes hot finished welded type, 200 mm aluminium aldrop, second class kail wood in planks, second class kail wood in scantling, safeda ballies 125 mm diameter, flats up to 10 mm in thickness, mild steel round bar 12 mm dia and below, pvc pipe 15 mm outer dia. 12kgf/cm2, ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., vitreous china orrisa type w.c. pan size 580 mm, vitrified floor tile 60x60 cm, hollock ballies 125 mm diameter, adjustable span eso+si (2.35-3.40), anjili wood scantls, bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, bright finished or black enameled mild steel butt hinges 50x37x1.50 mm, bright finished or black enameled mild steel screws 40 mm, bright finished or black enameled mild steel screws 20 mm, anjili wood planks, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile, 35 mm thick factory made solid panel pvc door shutter of single piece extruded profile non decorative finished (matt finished), powder coated m.s. butt hinges 100 mm x58 mm x 1.9 mm, anodised aluminium handles 125 mm with plate 175 x 32 mm, chromium plated brass screws 25 mm, iron hooks & eyes 100 mm, anodised aluminium tower bolt (barrel type)300x10 mm, chromium plated brass screws 30 mm.

Key Values

Document Fees : INR 2,500
EMD : INR 50,000
Tender Estimated Cost : INR 2,733,548
Closing Date : 24/08/2022
Location : Kerala - India

Value Added Services

  • Get consortium partner
  • Get Winning Estimate
  • Track Tender Result
  • Get Subcontractors
  • Find Liaison Agency
  • Ask Expert

Disclaimer : Tender Tiger takes all possible care to ensure accurate & authentic tender information however it cannot be held responsible for Omissions, Errors, etc. Users are advised to refer to Tender Document published by Procuring entity before they take submit their actual bid.