Latest Road Tenders

Provision of 11 kv vcbs and connected items - supply and lay cable xlpe insulated screened pvc bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 11000 volts grade with stranded aluminium conductor of size 120 sqmm 3 core ( main cable) complete all as specified and directed., supply and lay cable xlpe insulated screened pvc bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty ) 11000 volts grade with stranded aluminium conductor of size 95 sqmm 3 core complete all as specified and directed., m & l for cable route indicator made of cast iron plate circular type 10 cm dia duly marked blue colour marked lt cables arrows mark up side duly welded/nut, bolt with angle iron 45/45 equal size and 45 cm long duly grouted on ground with pcc (1:3:6) as in foundation & earth work excavation etc complete all as specified and directed at site., excavation in trenches in soft/loose soil not exceeding 1.50 meter wide and not exceeding 1.5 meter in depth and not exceeding 10sqmm on plan and getting out complete all as specified., excavation in trenchs .exc. 1.5 mtr in depth but not exceeding 3 mtr in depth and getting out in any type of soil complete all as specified., returning,filling in including spreding, levelling, watering and well ramming in layers not exceeding 25 cm thick each excavated soil in trenches after the pipes have been laid and tested completed as in soft/loose soil, complete all as specified and directed., removing of surplus soil/excavated material to a distance not exceeding 50meter and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed., m & l for plain cement concrete 1:3:6 type c-2 using 40mm graded stone aggregate as in foundations of pcc poles/struts, stay asembley, filling and mas concrete etc. including necessary fromwork complete all as specified and direted., m & l for plain cement concrete 1:2:4 type b-1 using 20mm graded stone aggregate for coping around poles,including necessary form work finishing even and smooth without using extra cement,all as specified and directed., m & l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of synthetic enamel paint complete all as specified and directed., m & l for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed., "supply & install steel tublar swaged pole welded with ms base plate size 30cm x 30cm x 6mm thick final taper plug bolts nuts & washers as per is: 2713 (part-i) 1980 made out of ms tubing including painting of two coats of aluminium paint of approved quality over one coat of red oxide primer length 11.00 mtr long, type 410 sp -55 complete all as specified and directed., note : (i) earth work and pcc work will be measured and paid separately under respective item of the schedule. (ii) material and labour for acsr conductor, cross arms, insulators will be measured and paid separately under respective item of the schedule.", supply and laying factory made unreinforced precast concrete cable cover, class hv, type 1 flat size 300mm x 180mm x 40mm for protection of ht cable laid flat length wise prependicular to the axis of cable complete all as specified and directed., m & l for galvanised iron strip 32x6 mm burried in ground with saddles and fixing with screw etc.for roof conductors and down conductor above ground for earthing complete all as specified and directed., supply, jointing, testing and commissioning cable end termination jointing kit 11 kv (earthed) grade cable for outdoor termination cold shrinkable type joint complete with jointing material and accessories suitable for 3 core xlpe armoured alluminium conductor cbale of size 120 sqmmm complete all as specified and directed., supply, jointing, testing and commissioning cable end termination jointing kit 11 kv (earthed) grade cable for outdoor termination cold shrinkable type joint complete with jointing material and accessories suitable for 3 core xlpe armoured alluminium conductor cbale of size 95 sqmmm complete all as specified and directed., supply & fixing steel water tubing, galvanised, light grade, isi marked, 80 mm bore with and including all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed., m & l for air break switch gang operated triple pole, machanically operated, mounted on insulator and steel framewith operating mechanisim worked from ground level, current rating upto 200 amps for 11 kv complete all as specified and directed., m & l for lightening arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 ka on 11000 volts complete all as specified and directed., m & l for anti-climbing device; spikes type fabricated out of m.s. bars (round, square and flat) including nuts,bolts, washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and directed., "m & l for danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in, signal red colour and fixed with m.s. clamps, bolts and nuts of approved size, for ht, 25x20 cm size complete all as specified and directed.", m & l for aluminium strip 25x3.15mm with saddles and fixing screw etc.for roof conductors and down conductor above ground or on ht poles for earthing completecomplete all as specified and directed., m & l for earthing complete with galvanized steel earth plate electrode 600x600x6mm surrounded by mixture of charcoal and salt in alternate layers burried directly in ground vertically in a pit of depth not less 2.25mtr below ground level with top edge of earth plate at a depth of not less than 1.50mtrs below ground level connected with and including 32x6mm galvanized iron strip as earthing lead by means of bolts, nuts, check nuts and washers made out of galvanized iron, 20mm dia medium grade gi pipes for watering with funnel, wire mesh and 40mm gi light grade protection pipe for gi strip and including necessary excavation, earth work, pcc 1:3:6 type c-2 concrete pit and rcc pit cover charcoal and common salt filling in alternate layers complete all as specified and directed by engineer-in-charge on electrical plate no-3 of ssr par-i of 2009 including testing complete all as specified and directed. note:(i)after completion if the desired earth resistance is not obtained the earthing will be re done at on extra cost. (ii) the result sheet of earthing may submit to ge duly signed by all concerned., "supply, installation, testing and commissioning of factory made ht panel 2mm thick crca sheet having following components/specifications:- , indoor vaccum circuit breaker panel suitable for 11 kv, 630 amps, 25 ka for 3 sec for outgoing conforming to iec 62271-200, front accessed having following specifications and comprising of following items:-, (a) 630 amps continuous rated electrolytic copper bus bars, droppers and bus bars should be insulated with full system voltage sleeves. (b) trolly mounted vaccum circuit breaker as per iec-62271-100, vaccum circuit breaker should have three nos resin encapsulated vaccum bottles., (c) motorized spring charging mechanism with integral spring charging handle for manual spring charge., (d) cast resin current transformer 11 kv, 300-150/5-5a, core 1: class 1.0, 15va, cor at Chandigarh,Punjab,India