|
Requirement :
|
Provision of Furniture for Dwelling Units Being Provided By Srfdcl at Mil Station Dhrangadhra -"chair Dining (fd/e6/map/10 (r)), , (a) All Dimension Shaped and Size Shall Be as Shown on Drawing as Specified., (b) All Wood Shall Be First Class Hard Wood (teak Wood) Fred Knots & Cracks., (c) Two Side Stifners in Short Sides Shall Be Provided 20mm X 25mm in Section. One Stifner of 20mm X 25mm in Section Shall Be Provided in the Middle of Short Stifners. Joining Short Stiffners., (d) the Cane Shall Be 2mm Wide 0.4mm Tick Half Round Gola Type of Shah Or Premier Brand Woven in Godrej Pattern., (e) All Joints/ Fixing Shall Be Done in Accoradance with Standard Workship and Specifications., (f) Pvc Hard Ring Shall Be Provided to Each Legs of Bottom., (g) All Wood Surfaces Exposed to View When Placed in Position Shall Be Franchised Polished with High Gloss Finish., (h) Rest All Other Times, Fittings and Fixtures Shall Be as Per Shown on Drawings & Directed., , ", "table Dining (120 X 90 Cms) (fd/map-ii/07), , Dimensions- Overall Size Shall Be 1200mm (l) X 900mm (w) X 760mm (h) , , Description All Wood Shall Be of Well Seasoned Teak Wood.top of the Table Shall Be Fixed Made Up of 18mm Thick Plywood Bwr Grade of Make Century Ply/ Archid Ply/ Green Ply with Laminate Sheet of Approved Shade of Make Archid Ply/ Century Ply/ Green Ply with 4mm Thick Teak Wood Beading of Semi Round Shape Alround the Edgesof the Top. Four Legs Shall Be 90mm X 45mm in Section and 750mm High. Legs Shall Be Joined By 45mm X 90mm Teak Wood Rails in Long and Short Sides at Top in Such a Way That Top of Legs and Top of Rails Shall Be at One Level 25mm X 45mm Teak Wood Wooden Members of Size 900mm Long Shall Also Be Provided as Shown in Drg.two Hard Wood Stiffeners of Size 90mm X 25mm in Section Shall Be Fixed Equally Spaced Joining the Long Rails with Dove Tailed. Four Teak Wood Brackets/ Corners of Size 100mm X 100mm X 35mm Thick Shall Aslo Be Provided Over 150mm X 30mm X 5mm Angle Iron Btacket. 25mm Dia, 25mm Hight Pvc Shoes Shall Be Provided at the Bottom of the Table. , , Finish- All Wooden Surfaces Shall Be Polished with Two Coats of Melamine with Approved Colour/ Shade as Directed After Preparation of Surface. Rest All as Per Drgs and Directed By Engg-in-charge/ Ge.", "dressing Mirror (fd/e6/map/16), , All as Shown on Drawing. Overall Size Shall Be 900mm Long, 300mm Wide and 150mm High at Bottom with Support of Mirror as 1115mm High. the Frame of Mirror Shall Be of Overall Size of 410mm Wide and 790mm High, Fixed at 150mm From Top of Lower Base. the Box of Table Dressing Gents Shall Be Provided with the Back of 12mm Thick Teak Wood Plank in One Piece and Top Shall Have Prelaminated Particle Board 12mm Thick with Teak Veneer Face on Top Irrespective of What is Shown on Drawing. Bottom Shall Be of 12mm Thick Prelaminated Particle Board with Teak Veneer Face on Both Sides. Sides and Portion Shall Be of 12mm Thick Prelaminated Particle Board Teak Venner Face. the Two Side Drawers Equally Spaced Having 255mm in the Middle. Front of Drawer Shall Be of 12mm Thick Prelaminated Particle, Teak Veneer Face. Sides of the Drawers Shall Be of 12mm Thick Teak Wood Plank Running Smoothly in the Drawers. the Bottom and Back of Drawer Shall Be 6mm Thick Plywood Commercial. Front Face of Shelves Shall Have 3mm Thick Teak Wood Edging as Shown on Drawing. Two Supports of 25mm X35mm X 115mm Teak Wood Batten Shall Be Provided as Shown on Drawing. 5.5mm Thick Mirror of Swastik Or Modiguard Or Autl Free From Distirtioned Other., (b) 8mm Thick Prelaminated Board Melamine Faced Veneered Decorative One Side and Other Balancing Exterior Grade with 4mm Teak Wood Edging Used in Cabinet Sides, Top & Bottom, Gradelecter Or Grade Shall Be Provided with 6mm Teak Wood Liping on Exposed Surfaces., (c) 2mm Thick Ply Wood Commercial Bwr Grade Phenol Isi Marked Backing to the Looking Mirror and Back Side Cabinet., (d) Mirror Shall Be 5.5mm Thick Polished Sheet Glass Supported on Reunner/ Glass Holder. , (e) 5.5mm Thick Glass Shelves Continuous (paino) Hinges Brass, Bright Finish for Cabinet Openable Side. , (f) All Wood Work Shall Be French Polished. ", Sch 'a' Part-ii (steel Furniture), "almirah Steel Medium (fd-1032), , Overall Size Shall Be 760mm (l) X 440mm (w) X 1270mm (h). the Base Shall Be Made of Two Numbers Mild Steel Sheet Channel Base Welded to Bottom of Almirah and Shall Be 100mm High. Mild Steel Sheet Shall Be 1mm Thick for Channels Base. the Base Channel Shall Be Welded at 50mm From Each End of 760mm Length and Shalle Upto Full Width of 440mm of Almirah. Top, Sides, Back, Bottom and Front of Almirah Shall Be of 1mm Thick Mild Steel Sheet. Three Shelves Equally Spaced Making Four Compartments Shall Be Provided and Shall Be of 1mm Thick Mild Steel Sheet. Front Shutter Shall Have Two Leaves. a Steel Chromium Plated Handle Shall Be Provided to the Shutter, Handle Shall Be 100mm Long. a Three Way Locking Device Shall Be Provided to Front Shutters Each Leaf of Front Shutter Shall Be Hinged with Two Numbers Butt Hinges 75mm Long and Shutters Shall Be Side Hung. All Joints and Welding, Fixing Shall Be Done in Accordance with Standard Workmanship. All Steel Surfaces Exposed to View Placed in Position Shall Be Given Two Coats of Enamel Paint Over One Coat of Primer After Preparation of Steel Surfaces. Painting Shall Be Done with Spray Machine., ", "charpoy Ip Hard Top (fd/map-ii/01), , (a) All Dimension Shape and Size Shall Be as Shown in Drawing and as Specified. Overall Size Shall Be 1980mm (l) X 900mm (w) X 440mm (h)., (b) Frame Shall Be 25mm X 65mm X16 Guage Ms Tube Alround., (c) Legs Shall Be 32mm X 32mm X 16 Guage Ms Tube, 32mm X 32mm X 5mm Ms Plate Welded at the Bottom of Legs & Under Which 3mm Thick Rubber Sheet Fixed with Adhesive., (d) Stiffeners 25mm X 25mm X 16 Gauge Ms Tube Stifferners Shall Be Provided in Equal Distance as Shown in Drg., (e) Ms Cleat 25mm X 60mm X 6mm Ms Cleat 06 Nos Shall Be Welded to the Frame to Support the Plywood as Shown in Drg., (f) Top Shall Be 12mm Thick Bwr Phenol Bonded Commercial Screwed on Ms Cleats & Stiffners with Cup Washer., (g) Paint All Steels Members Shall Be Powder Coated & Painted. All Their Details/ Fitting Shall Be as Shown on the Drawing.", "rack Shoe Steel (fd/e6/map/02 (r)), , Dimension Over All Size Shall Be 700mm Long 300mm Wide and 880mm High., , Description the Legs of the Shoe Rack Shall Be of 25mmdia Ms Pipe of 18 Gauage. the Five Shelves of the Rack Shall Be of 20mm Dia Ms Pipe of 18 Gauge Weldedto Legs. the Shelves Shall Have 3mm Dia Ms Rod 9 Nosin Widthwise and 3 Nos in Lengthwise Welded to 20mm Dia Shelf Frame., , Finish Pre Treated with Epoxy Powder Coated Oven Bakedwith Ivory White Colour/ White/ Warm Grey."
|