|
Requirement :
|
Supply of Material Requirement in Mandsaur Division , Brick Standared Size Crushing Strength 25kg /cm2 , iron Windoow Grill, floor Tiles 2x2 Mat Finish, Wall Tiles 12x18 (isi Standared), Floor Tiles 12x12 (isi Standared), Indian Sheet 20” (isi Standared), Westarn Sheet (isi Standared) , Wash Besin (isi Standared) , Cink 24x18 (isi Standared) , Pipe 110 Mm 3 Mtr (isi Standared) , Elbow 110 Mm (isi Standared), T 110 Mm (isi Standared), Pipe 1/2” Upvc (isi Standared) , Pipe 1/2” Cpvc (isi Standared) , Elbow 1”, T 1” (isi Standared) , T 1x1/2” (isi Standared) , Elbow ½” Brass (isi Standared) , Water Tank (isi Standared) , Wpc Door Plane 28mm (650 Density) (isi Standared) , Jsw Exterior Paints (isi Standared) , Birla White Cement (isi Standared) , Birla White Putty (isi Standared) , Jsw Primer Interior (isi Standared) , Jsw Primer Exterior (isi Standared) , Oil Paint (isi Standared) , 7x4 Board (pvc) (isi Standared) , Holder A+b (isi Standared) , Ceiling Fan 48’’ (isi Standared) , Led Tub Light (isi Standared) , Modular Switch (isi Standared) , 5 Pin Socket (isi Standared) , 16a Switch (isi Standared) , 16a Socket (isi Standared) , Regulator 2 Mod (isi Standared) , Wire 1mm (isi Standared) , Pipe 25mm (isi Standared) , Pipe 25 Hid. (isi Standared) , Street Light Led 50w (isi Standared) , 16 a Single Mcb (isi Standared) , 32 a Double Pole (isi Standared) , 2 Core Cable 6mm (isi Standared) , Lt Cabal 25mm (isi Standared) , Service Cabal 8mm (isi Standared) , Three Phase Connection Box (isi Standared) , Water Electric Geyser Isi Mark, Led Penal Light 15w (isi Standared) , Cob Led 3 W (isi Standared) , Rcc Pole (size 100x100mm of 2.0 Mtr Lenght), Prcc Pole (size 100x100mm of 2.0 Mtr Lenght), Stone Pole (size 100x100mm of 2.0 Mtr Lenght), Chain Link Fencing (galvanized Steel Chain Link Fence Fabric Size 100x100mm, Dia 3.15mm Mesh Wire and 4.0 Mm Dia Line Wires 2 Nos. Upto 2 Mtr, Width and 3 Nos. Above 2 Mtr, Width Conforming to is 2721-2003 with Upto Date Amendments.), Barbed Wire (galvanized Steel Barbed Wire Type B-4 the Barbs Shall Have Four Points and Shall Be Formed By Twisting Two Point Wires Each Two Turns, Tightly Around One Line Wire Making All Together Four Complete Turns Line Wire 2.5 Mm, Point Wire 2.0 Mm Distance Between Two Barbs 150 Mm, Conforming to Is-278-2009).
|