| Pre-Qualification : |
Minimum Average Annual Turnover of the bidder (For 3 Years) (3 ) : 7 Lakh (s)
Years of Past Experience Required for same similar service : 1 Year (s)
MSE Exemption for Years of Experience and Turnover : No
Startup Exemption for Years of Experience and Turnover : No
Document required from seller : Experience Criteria,Past Performance,Bidder Turnover,Compliance of BoQ specification and supporting document *In case any bidder is seeking exemption from Experience / Turnover Criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer
Past Performance : 20 %
|
|
Requirement :
|
Supply of Plywood 8 feet X4 feet X 12mm one side teakface, Cusion with Cover 21 inch x 22 inch x 4 inch, Cover for Cushion 550 mm X 525 mm X 100 mm, Leg of Charpoy GI Pipe 32mm dia and 408mm Length duly threaded at one end as per drawaing FD - 220, Long rail GI 32mm for GI chorpoy size 2 mtrs long both side duly threaded, seat cushioned foam 21 inch x 22 inch x 4 inch 40 density Ref FD-1113, Tape Newar Nylon 50mm wide , Cushion Seat with Rexine Cover for chair dining Cushion as per FD-MAP-II-04, Cusion with Cover for stool dressing Lades MAP as per FD-MAP-II-07, Cushion Seat with Rexine Cover for chair wrting Cushion as per FD-1107, Cushion back with Rexine Cover for chair Easy Cushion as per FD-358, Mirror for ladies dressing table 1200 mmx 600mm x five point five mm thick, Back for Chair CBA steel, PVC seat and back for chair varandah FD-MAP-II-06, PVC Seat for chair dining Make Amko as per FD-MAP-II-05, Handle SS for Locker Steel, Handle CP for Almirah Steel 100mm, Shocker or Hydraulic Spindle for Chair Revolving, Paint Brush 25mm, Nails wire 32mm headless, Bow Handle Aluminium 100mm, Screw wood steel 65mm Gypsum, Screw Wood steel 25mm 100 Nos Gypsum, Screw 75mm, Nails wire Half inch Head less 18 Number, Nails wire 20mm, Nails Wire 50mm 14 No, Nails wire 60mm 14 No, Nails wire 15mm, Nails Wire 25mm 14 No, Nails wire 50mm, Nails Wire 40mm 14 No, Nails wire 100mm 14 No, Screw wood steel 30mm Philips Head, Emery Paper 220, Hacksaw Blade 1 inch wide, Butt Hinges 50mm, Plywood 6 feet X4 feet X 19 mm, Plywood 8 feet X 4 feet X 4 mm one side teak face, Plywood commercial 8 feet X3 feet X19 mm, Pre laminated Particle Board 9 feet X 6 feet x 18mm thick Qty 548
|