||Supply and fixing of lab furniture - "providing and fixing sefa -8 compliant ‘c’/’d’ frame (providing and fixing sefa-8m tested by sefa approved laboratory) system made up of 60 mm x 30 mm or 30 mm x 30 mm rectangular pipe of 2/1.6 mm thickness, with frame having 3 or 4 projecting pipe sections of 60 mm x 30, mm or 30 mm x 30 mm with thickness of 2/1.6 mm on the back;with the leveller at the bottom. all frame work must be pre - treated with superior pure epoxy powder coating of 50 - 60 micron. l-705 mm x h - 880 mm x, d -30 mm. the c/d - frames should have enough strength for suspending storage cabinets capable of fully carrying the load of worktops. its superior strength combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a, layout, providing & fixing horizontal connecting sets should comprise of 4 elements. one front connecting beam & one back connecting beam, each made up of, 2/1.6 mm thick sheet formed in a “c”/’d’ section, beams are removable. one bottom skirting type connecting bar of 160±10 mm height, & one centre beam should be placed between back beam & skirting beam. together, with the c/d frames & horizontal members connected together, the skeletal structure of the work-bench is formed on which the worktop can be placed & the hanging-type storage cabinets can be suspended., ", l-600 mm connecting sets, l-750 mm connecting sets, l-1200 mm connecting sets, l-1350 mm connecting sets, l-1500 mm connecting sets, "supply & fixing of storage boxes made up 100% epoxy powder coated crca virgin tata ® / mittal arcelor make sheet, powder coating thickness of 50 - 60 microns, sheet, thickness of 0.8 mm for all body, shutters & drawers are of sandwich type. all modules should go in knock down condition & assembled & fitted at site. shutters must have exposed s.s.-304 butt hinges). all joinery hardware is to be of ss-304 bolting system. handles should be “d” type made up of ss-304, 8 mm thick solid rod, with nickel-chrome plating and further a lacquer coat.", storage size, l-600 mm x d-530 mm x h-635 mm, 1 drawer / 2 shutters, storage size, l-750 mm x d-530 mm x h-635 mm, 1 drawer / 2 shutters, supply & fixing of sink storage boxes fitted with sink, made up of 5 mm thick high density and elastic polypropylene with bowl size (l x w x d) is 560 x 340 x 245mm. each sink to be provided with a bottle trap & hose pipe. a 3-way tap to be be provided with the sink unit, which should have 2 fixed bib cocks & one swan neck swivel cock made in brass and heavy duty knobs. 360' swing goose neck spout with brass head workmade up 100 % epoxy powder coated crca virgin tata ® make sheet powder coating thickness of 50-60 microns, sheet thickness of 0.80 mm for body, shutters & drawers are to be sandwich type. all modules should go in knock down condition and assembled and fitted at site. shutters must have exposed s.s. - 304 butt hinges with rotary catcher closing mechanism (preferable with pp rollers to have longer life). all our joinery hardware is to be of ss-304 bolting systems. handles should be “d” type made up of ss-304, 8 mm thick solid rod, with nickel-chrome plating and further a lacquer coat., storage size, l-600 mm x d-530 mm x h-635 mm, 2 shutters, storage size l-750 mm x d-530 mm x h-635 mm, 2 shutters, supply and fixing of knee space having one footrest made up of 1mm thick sheet (25 x 50 x 25 mm) 'c' channel type and openable back cover panel of 0.8 mm thickness with length as per requirement., l-600 mm , l-750 mm, providing and fixing of all side cover panels to be made from crca ms panels of minimum 0.8mm thickness with pure epoxy powder coating. size 185 mm x 835 mm with 15 mm bend on all sides., "providing and fixing two tier regent rack to be fixed at suitable places wherever required, all vertical end pillars and horizontal shelves to be made of 1 mm thick crca sheet, front, back cover & inside panels to be made out of 0.8 mm thick crca sheet, with both sides epoxy based powder coated with complete modular design consisting of 2 stage horizontal storage shelves; with an integrated raceway of minimum height, so as to provide maximum storage space. cover panles should have one cutout for 6 module plate (on each side of island regent and one side of wall regent rack) for electrical switches and sockets.", size l-1500 x d-300 x h-650 mm , size l-1500 x d-150 x h-650 mm , size l-1200 x d-300 x h-650 mm , size l-1200 x d-150 x h-650 mm, size l-900x d-150 x h-650 mm, size l-750 x d-300 x h-650 mm, size l-750 x d-150 x h-650 mm , providing and fixing electrical sockets procured from norisys/ legrand/ anchor roma or equivalent to be placed on the face of the regent rack. each set comprising of 1 no. 6 m plate, 1 no. 6a switch & socket, 1 no. 20a switch & socket (without wiring) electrical sockets should be read as providing and fixing electrical sockets in 6 module plates having one number 5/15 amps switch and socket and one number 16 amps switch and socket of northwest / anchor roma/ l&t / norisys make with 2.5sqmm frls cable complete with internal wiring. , "providing and fixing of the worktops is 18 mm ± 2 mm jet(z)-black granite of an even surface. the exposed edges of the granite should be chamfered and, smoothened. granite should have packing of 6 mm x 30 mm neoprene underneath so as to have dampening effect and better absorption of vibration.", pegboard - acrylic with 23 pegs made of acrylic with 23 pp pegs and ss 304 collection tray. preferred makes premier polymers, space plus design labs, water saver, broen, 2-way eye wash with preferred makes premier polymers, water saver, broen, 4 way gas valve, 90 degree made up of brass., display shelf with glass front. size - l -1000 x d - 600 x h-1980 mm with 3 shelves, making 4 compartments display shelf made up of crca sheet ., sitting table size l- 1350 x w- 900 x h-750 mm sitting table made up of crca sheet with one drawer and one shutter with granite top., mesh chairs medium back mesh chairs with pp armrest, chrome back, gas lift, pu leatherite tapestry for government medical college (ghat).