Special repair to pump sets and connected items - supplying, installing, testing and commissioning three phase, 415 v, 50 hz monobloc pump of size 80 mm (suction) x 65 mm (delivery), 15 hp capacity, speed 3000 rpm, minimum discharge 19.2 litre per second for 32 metre head, cast iron impeller/diffuser, delivery casing, motor body, ip55 protection, class f of insulation, replaceable wearing parts etc. including suitable capacity tefc motor as per model no. kdi-1555+ of m/s kirloskar brothers limited or equivalent of make mentioned under appendix "b" including start delta starter of suitable capacity & suitable size connecting cable and including necessary modification/addition/ alteration to the existing suction and delivery pipe line to make suitable for connecting with the pump and including foundation with plain cement concrete in m15 (nominal mix) using 20 mm nominal size crushed stone aggregate with excavation, earth works etc. complete all as specified and as directed., supplying, installing, testing and commissioning three phase, 415 v, 50 hz monobloc pump of size 80 mm (suction) x 65 mm (delivery), 12.5 hp capacity, speed 3000 rpm, minimum discharge 14.3 litre per second for 40 metre head, cast iron impeller/diffuser, delivery casing, motor body, ip55 protection, class f of insulation, replaceable wearing parts etc. including suitable capacity tefc motor as per model no. kdi-1348+ of m/s kirloskar brothers limited or equivalent of make mentioned under appendix "b" including start delta starter of suitable capacity & suitable size connecting cable and including necessary modification/addition/ alteration to the existing suction and delivery pipe line to make suitable for connecting with the pump and including foundation with plain cement concrete in m15 (nominal mix) using 20 mm nominal size crushed stone aggregate with excavation, earth works etc. complete all as specified and as directed., supplying, installing, testing and commissioning single phase, 230 v, 50 hz monobloc pump of size 25 mm (suction) x 25 mm (delivery), 1 hp capacity, minimum discharge 3200 litre per hour at 6 metre head, brass impeller, extruded aluminium die cast body, cast iron suction delivery chamber, carbon steel shaft etc., ip44 protection, class b insulation, including tefc capacitor starts and run motor as per model no. crystal of m/s kirloskar brothers limited or equivalent of make mentioned under appendix "b" including starter of suitable capacity & suitable size connecting cable and including foundation with plain cement concrete in m15 (nominal mix) using 20 mm nominal size crushed stone aggregate with excavation, earth works etc. complete all as specified and as directed., "supplying, installation, testing and commissioning vertical turbine pump, francis impeller type, electric motor with vertical solid shaft motor driven, self-water lubricated, discharge capacity of 63 litres per second at total head of 107.5 metres, 1450 rpm pump speed, 6 stages, impeller made of bronze, other parts made of materials as specified in is 1710 2021, of suitable length to draw water from 10 metre depth, guarantee of the pumps with class c ratings as per clause 4.1 and 9.4 of is 9137 2019, flexible couplings including fan cool (tefc) induction motor 415 v, 3 phase, 50 hz, 1450 rpm including making electric connection with suitable size pvc insulated multi stranded copper conductor single core cable drawn through & including medium mechanical stresses class pvc conduit as per is 9537 (part-iii) 1983 of suitable nominal size with panel board, start delta starter complete all as specified and as directed including the following provisions., note , (i) contractor shall submit the technical specification, pump performance curve chart, construction data sheet, cross sectional drawing, tentative general arrangement drawing etc of pump and motor from manufacture to suit the requirement and will take prior approval of ge before procurement., (ii) rating of induction motor should be as per recommended by manufacture to drive the pump but in any condition not less than 150 hp. , (iii) site of the pump installation shall be got inspected by the contractor prior to installation of pump., (iv)construction shall be rigid to ensure vibration free operation of pump., (v) suitable foundation of concrete or steel frame shall be constructed as recommended by the manufacturer.", "supplying, installing, testing and commissioning soft starter including contactors and accessories suitable for heavy duty application 3 phase 6 wire (inside delta connection) ac 415 v, 50 hz suitable for operating pump set not less than 150 hp, rating current not less than 300 amps, control voltage 200 v to 440 v, constant current, non by passed connection system, 6 starts per hour, 300 percent start current, 15 second start time, 15 second stop time, xlr-8 adaptive acceleration control for pumps, kick starter, comprehensive motor protection, large lcd display with keypad, fully programmable, overload trip, 5 digital input and 4 digital output complete all as specified and as directed., note the rate quoted by the contractor shall deemed to include enclosure (panel), contactors, transformer, mcbs, mccbs, hrc fuses, connectors, lugs and any other accessories required for smooth functioning of soft starter.", "supplying, installation, testing and commissioning vertical turbine pump, francis impeller type, electric motor with vertical solid shaft motor driven, self-water lubricated, discharge capacity of 63 litres per second at total head of 60 metres, 1450 rpm pump speed, 3 stages, impeller made of bronze, other parts made of materials as specified in is 1710 2021, of suitable length to draw water from 10 metre depth, guarantee of the pumps with class c ratings as per clause 4.1 and 9.4 of is 9137 2019, flexible couplings including fan cool (tefc) induction motor 415 v, 3 phase, 50 hz, 1450 rpm including making electric connection with suitable size pvc insulated multi stranded copper conductor single core cable drawn through & including medium mechanical stresses class pvc conduit as per is 9537 (part-iii) 1983 of suitable nominal size with panel board, start delta starter complete all as specified and as directed including the following provisions., note , (i) contractor shall submit the technical specification, pump performance curve chart, construction data sheet, cross sectional drawing, tentative general arrangement drawing etc of pump and motor from manufacture to suit the requirement and will take prior approval of ge before procurement., (ii) rating of induction motor should be as per recommended by manufacture to drive the pump but in any condition not less than 75 hp. , (iii) site of the pump installation shall be got inspected by the contractor prior to installation of pump., (iv)construction shall be rigid to ensure vibration free operation of pump., (v) suitable foundation of concrete or steel frame shall be constructed as recommended by the manufacturer.", "supplying, installing, testing and commissioning soft starter including contactors and accessories suitable for heavy duty application 3 phase 6 wire (inside delta connection) ac 415 v, 50 hz suitable for operating pump set not less than 75 hp, rating current not less than 150 amps, control voltage 200 v to 440 v, constant current, non by passed connection system, 6 starts per hour, 300 percent start current, 15 second start time, 15 second stop time, xlr-8 adaptive acceleration control for pumps, kick starter, comprehensive motor protection, large lcd display with keypad, fully programmable, overload trip, 5 digital input and 4 digital output complete all as specified and as directed., note the rate quoted by the contractor shall deemed to include enclosure (panel), contactors, transformer, mcbs, mccbs, hrc fuses, connectors, lugs and any other accessories required for smooth functioning of soft starter against ber sets under ge.
Special repair to pump sets and connected items against ber sets under ge saugor
special repair to pump sets and connected items against ber sets under ge saugor
Cast Iron Tenders, Circuit Breakers/Fuse Tenders, Conductor Tenders, Connector Tenders, Diversified Electrical Spares And Stores Tenders, Earth Work Tenders, Excavation Work Tenders, Foundation Tenders, Insulation and Insulating Materials Tenders, Metal Products Tenders, Motor Tenders, Pipeline Project Tenders, Pump Tenders, R C C Work Tenders, Stone Tenders, Transformer Tenders, Wire And Cable Tenders