Pre-Qualification : |
1 1. The bidder shall provide satisfactory evidence, acceptable to the purchaser to show that he is a regular manufacture and has adequate plant and manufacturing capacity and has a "Quality Assurance Plan". 2. The manufacturer shall have valid ISO 9001 certificate on the original date of closing of tender and a copy of same should be submitted along with the bid. The Press Brake Machine shall be in the scope of ISO certificate. 3. The bidder/manufacturer must have supplied at least 01 number of same/similar machines in last 05 years (to be reckonedfrom the original date of closing of tender). Statement of past supplies shall be submitted as per the format given in clause no. 2(b) of Annexure -A, of common conditions and specifications for M&P procurement of M&P (CCSM&P). 4. Same/similarity mentioned in clause no.3 above would mean a CNC Press brake of 200T capacity or higher and a Bending length of 3050 MM or higher. The bidder shall, in their offer, submit performance certificate of at least 01 number of such machines supplied in the last 05 years and the machine covered by these certificate must have worked satisfactorily for at least one year from the date of commissioning as on the original date of closing of tender. The details of past performance certificates submitted with the offer shall be submitted as per the format given in clause no 2(c) of Annexure-A, of common conditions and specifications for M&P procurement of M&P (CCSM&P). 6. The certificate shall not be older than one year from the original date of closing of tender. The performance certificate issued after original date of closing of tender (in cases where tender closing date has been extended) are also acceptable however the machine must have completed one year of satisfactory working after date of commissioning as on original date of closing of tender. 7. The performance certificate submitted by the bidder shall have been issued by the actual end user organization of the machine on their letter head, with their clear signature and address therein, in whose premises the machine is installed and commissioned. Yes Yes Allowed (Mandatory) 2 8. Copies of POs / commissioning / performance certificate submitted shall also indicate the parameters / specification of subject machine to prove same / similarity aspect of the machine as mentioned. 9. Technical specifications of the machine as featured in PO may be attached to establish similarity of parameters with Broad parameters in clause #2.0 of technical specification. 10. All necessary information/documents required for establishing reference requirement as per clause above shall be submitted by the bidder along with original offer itself for establishing linkage of documents / entities such as manufacturer / PO / consignee / supply / installation / commissioning / performance certificate of the machine . No further clarification / correspondence shall be sought / entertained in this regard. 11. Non-compliance of following shall lead to summarily rejection of the offer and no correspondence in this regard will be entertained. (a) The productivity requirement, as specified in clause #2.3,2.5,& 2.6 of this specification (TS) (b)There shall not be any deviation from the Major parameters mentioned in clause #2.1&2.2 of this specification (TS). Yes Yes Allowed (Mandatory)
|