|
Requirement :
|
Supply of materials for Works, Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper
Vibrator (Needle type 40 mm), Stone Aggregate, Safeda ballies 125 mm diameter, Portland Cement, Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm, Bright finished or black enameled mild steel screws 40 mm, Coarse sand (zone III), Fine sand (zone IV), Twisted steel/deformed bars, Structural steel such as tees, angles, channels and R.S. joists, Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, Galvanised steel J or L hooks 8 mm dia, Bolts and nuts up to 300 mm in length, Stone for masonry work, Second class kail wood in scantling, Second class kail wood in planks, G.I Limpet washer, Bitumen washer, Welding by electric plant, Wire nails, Diesel oil, G.I pipes 50 mm dia, Mild steel tubes hot finished welded type, Red oxide Zinc chromate primer, White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings
wall form panel 1250x500 mm, Corner angle 45x45x5 mm 1.50 m long, 100 mm channel shoulder 2.5 m long, Double clip (bridge clip), Single clip, M.S. Tube 40 mm dia, Adjustable span ESO+SI (2.35-3.40), Adjustable telescopic prop 3 m (2.02-3.75m), Multi surface paint
Metal Primer (U.G.), Water proof ply 12 mm thick, Mangalore ridge tiles 20 mm thick, Mangalore tiles 20 mm thcik, Precoated galvanised steel plain ridges, Hire charge of 5 HP engine and pump set, GI trafford profile sheet 0.35mm thick, Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm, 200 mm Aluminium aldrop
Solid blocks of size 30x20x15cm, PVC pipe 20 mm outer dia 10 kfg/cm2, Quarry Waste.
|