| Pre-Qualification : |
1 a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. No No Allowed (Mandatory) 1.1 (b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. No No Not Allowed 1.1.1 (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. No No Not Allowed 1.1.2 (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contract or through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing. No No Not Allowed 30/05/2024 15:001.2 Note for technical eligibility criteria: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. No No Not Allowed 1.3 Credentials if submitted in foreign currency shall be converted into Indian currency i.e., Indian Rupee as under: The conversion rate of US Dollars into Rupees shall be the daily representative exchange rates published by the Reserve Bank of India or entity authorized by RBI to do so for the relevant date or immediately previous date for which rates have been published. Where, relevant date shall be as on the last day of month previous to the one in which tender is invited. In case of any other currency, the same shall first be converted to US Dollars as on the last day of month previous to the one in which tender is invited, and the amount so derived in US Dollars shall be converted into Rupees at the aforesaid rate. The conversion rate of such currencies shall be the daily representative exchange rates published by the International Monetary Fund for the relevant date or immediately previous date for which rates have been published. No No Not Allowed 1.4 Explanation for Eligibility Criteria: No No Not Allowed 1.4.1 Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender. No No Not Allowed 1.4.2 In case a work is started prior to 07 (seven) years, ending last day of month previous to the one in which tender is invited, but completed in last 07 (seven) years, ending last day of month previous to the one in which tender is invited, the completed work shall be considered for fulfillment of credentials. No No Not Allowed 1.4.3 If a work is physically completed and completion certificate to this extent is issued by the concerned organization but final bill is pending, such work shall be considered for fulfillment of credentials No No Not Allowed 1.4.4 In case of completed work, the value of final bill (gross amount) including the PVC amount (if paid) shall be considered as the completion cost of work. In case final bill is pending, only the total gross amount already paid including the PVC amount (if paid) shall be considered as the completion cost of work. In case of substantially completed work, the total gross amount already paid including the PVC amount (if paid), as mentioned in the certificate, shall be considered as the cost of substantially completed work. No No Not Allowed 1.4.5 If a bidder has successfully completed a work as subcontractor and the work experience certificate has been issued for such work to the subcontractor by a Govt. Organization or public listed company as defined in Note for Item 10.1 Para 10 of the Tender Form (Second Sheet), the same shall be considered for the purpose of fulfillment of credentials. No No Not Allowed 1.4.6 In case a work is considered similar in nature for fulfillment of technical credentials, the overall cost including the PVC amount (if paid) of that completed work or substantially completed work, shall be considered and no separate evaluation for each component of that work shall be made to decide eligibility No No Not Allowed 1.4.7 In case of existing partnership firm, if any one or more partners quit the partnership firm, the credentials of remaining partnership firm shall be re-worked out i.e., the quitting partner(s) shall take away his credentials to the extent of his share on the date of quitting the partnership firm (e.g. in a partnership firm of partners A, B & C having share 30%, 30% & 40% respectively and credentials of Rs 10 crore; in case partner C quits the firm, the credentials of this partnership firm shall remain as Rs 6 crore). For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deed(s), dissolution deed(s) and proof of surrender of PAN No.(s) in case of dissolution of partnership firm(s) etc. No No Not Allowed Page 3 of 20 Run Date/Time: 08/05/2024 18:12:57 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY TENDER DOCUMENT Tender No: 2024-May-02-01 Closing Date/Time: 30/05/2024 15:001.4.8 In case of existing partnership firm if any new partner(s) joins the firm without any modification in the name and PAN/TAN no. of the firm, the credentials of partnership firm shall get enhanced to the extent of credentials of newly added partner(s) on the same principles as mentioned in item 6 above. For this purpose, the tenderer shall submit along with his bid all the relevant documents which include copy of previous partnership deeds, dissolution/splitting deeds and proof of surrender of PAN No.(s) in case of dissolution of partnership firm etc. No No Not Allowed 1.4.9 Any partner in a partnership firm cannot use or claim his credentials in any other firm without leaving the partnership firm i.e., In a partnership firm of A&B partners, A or B partner cannot use credentials of partnership firm of A&B partners in any other partnership firm or propriety firm without leaving partnership firm of A&B partners. No No Not Allowed 1.4.10 In case a partner in a partnership firm is replaced due to succession as per succession law, the proportion of credentials of the previous partner will be passed on to the successor. No No Not Allowed 1.4.11 If the percentage share among partners of a partnership firm is changed, but the partners remain the same, the credentials of the firm before such modification in the share will continue to be considered for the firm as it is without any change in their value. Further, in case a partner of partnership firm retires without taking away any credentials from the firm, the credentials of partnership firm shall remain the same as it is without any change in their value. No No Not Allowed 1.4.12 In a partnership firm "AB" of A&B partners, in case A also works as propriety firm "P" or partner in some other partnership firm "AX", credentials of A in propriety firm "P" or in other partnership firm "AX" earned after the date of becoming a partner of the firm AB shall not be added in partnership firm AB. No No Not Allowed 1.4.13 In case a tenderer is LLP, the credentials of tenderer shall be worked out on above lines similar to a partnership firm. No No Not Allowed 1.4.14 In case company A is merged with company B, then company B would get the credentials of company A also.] No No Not Allowed 1.5 Defination of Similar Work :- Any civil engineering works. No No Not Allowed Bidders shall confirm and certify on the behalf of the tenderer including its constituents as under:
S.No. Description 1 I/we the tenderer (s) am/are signing this document after carefully reading the contents. 2 I/We the tenderer(s) also accept all the conditions of the tender and have signed all the pages in confirmation thereof. 3 I/we hereby declare that I/we have downloaded the tender documents from Indian Railway website www.ireps.gov.in . I/we have verified the content of the document from the website and there is no addition, no deletion or no alteration to the content of the tender document. In case of any discrepancy noticed at any stage i.e. evaluation of tenders, execution of work or final payment of the contract, the master copy available with the railway Administration shall be final and binding upon me/us. 4 I/we declare and certify that I/we have not made any misleading or false representation in the forms, statements and attachments in proof of the qualification requirements. 5 I/We also understand that my/our offer will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us. 6 I/We declare that the information and documents submitted along with the tender by me/us are correct and I/we are fully responsible for the correctness of the information and documents, submitted by us. 7 I/we certify that I/we the tenderer(s) is/are not blacklisted or debarred by Railways or any other Ministry / Department of Govt. of India from participation in tender on the date of submission of bids, either in individual capacity or as a HUF/ member of the partnership firm/LLP/JV/Society/Trust. 8 I/we understand that if the contents of the certificate submitted by us are found to be forged/false at any time during process for evaluation of tenders, it shall lead to forfeiture of the Bid Security and may also lead to any other action provided in the contract including banning of business for a period of upto two year. Further, I/we and all my/our constituents understand that my/our offer shall be summarily rejected. 9 I/we also understand that if the contents of the certificate submitted by us are found to be false/forged at any time after the award of the contract, it will lead to termination of the contract, along with forfeiture of Bid Security/Security Deposit and Performance guarantee and may also lead to any other action provided in the contract including banning of business for a period of upto two year. 10 I/We have read the clause regarding restriction on procurement from a bidder of a country which shares a land border with India and certify that I am/We are not from such a country or, if from such a country, have been registered with the competent Authority. I/We hereby certify that I/we fulfil all the requirements in this regard and am/are eligible to be considered (evidence of valid registration by the competent authority is enclosed) Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
S.No. Description Page 4 of 20 Run Date/Time: 08/05/2024 18:12:57 AGRA DIVISION-ENGINEERING/NORTH CENTRAL RLY TENDER DOCUMENT Tender No: 2024-May-02-01 Closing Date/Time: 30/05/2024 15:001 Partnership firm/Joint Venture (JV) / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. Please submit a certificate in the prescribed format (please download the format from the link given below). Non submission of the certificate, or submission of certificate either not properly filled in, or in a format other than the prescribed format shall lead to summary rejection of your offer. ( Click here to download the Format of Self Certification)
|
|
Requirement :
|
Zone-6 Mtj(excl)-bfp (excl), Mtj(excl)-awr (excl), Mtj(excl)-ah(excl)-bdb Repair & Maintenance Work of Various Items During the Year 2024-25 (01.07.24 to 30.06.25) - Ordinary, Portland Cement, (grey) (43 Grade), Portland, Pozzolona, Cement (grey), (43 Grade), White Cement, Reinforcement, Steel, Admixtures, Water Proofing, Compound, Autoclaved, Aerated Blocks, Polymer Modified, Adhesive for Aac, Blocks, Factory Made, Panelled & Wire, Gauge Wooden, Door/ Window, Shutters., Flush Door, Shutters, Block Board, Laminates, Pre-laminated, Particle Board, Particle, Board, (medium, Density)/, Veneered, Particle, Board, Pre-laminated, Medium Density, Fibre Board, Oms/ Ms Door, Fittings, Anodised/ Zinc, Alloy/ Aluminium, Hardware Door/, Window Fittings, Frp Door Frames &, Shutters, Widows Blinds, Structural, Steel Such as, Ms Flats, , Sq.bars Angles, Etc., Mild Steel Door, , Windows &, Ventilators, Manufacturers, Pressed Steel, Door Frames, Manufacturers, Hollow Steel, Sections, Steel Tubes for, Structural Steel, Dash/, Anchoring, Fasteners, , Bolts, Screws, and Nuts., Stainless Steel, Railing, Chequerred Precast, Cc Tiles, Ceramic Tiles, Vitrified Tiles, Adhesive/, Grouting, for Use with, Tiles, Unplastic, Ised Rigid, Pvc Pipe &, Fittings, False Ceilinggypsum, False Ceilingmetal, False Ceilingcalcium, Silicate, False Ceilingmineral, Fibre, Accoustic Glass, / Wooden Fibre, False Ceiling and, Wooden/ Fabric, Wall Lining, False Ceilingaluminium, Powder Coated, Oil Bound, Distemper/ Acrylic, Distemper, Interior Emulsion/, Plastic Emulsion, Acrylic Smooth, Exterior Paint, Dry Distemper, Synthetic Enamel, Paints, Wood Primer, Steel Primer, Exterior Wall, Primer, Wall Putty (white, Cement Based), Polymer Modified, Self Curing, Plaster, Paver/ Grass, Paver Blocks, & Kerb Stones, Vitreous China, Sanitary Ware, Plastic Flushing, Cistern for Wc, and Urinals, Plastic Seat Cover, of W.c., Stainless Steel, Sink, Mirror Glass, Centrifugally, Cast (spun) Iron, Pipes, Hubless, Centrifugally, Cast (spun), Iron Pipes, Cp Fittings &, Accessories, Brass Stop & Bib, Cock, Ferrules for, Water Supply, Ball Cock with, Rod, Polyethylene, Water Storage, Tank, Stoneware Pipes &, Gully Traps, Pre-cast, Concrete Pipes, (non- Pressure), Gi Pipe, Gi Fittings, C-pvc Pipe, Gun Metal Gate, , Globe, Check, Valves & Nonreturn, Valves, Centrifugally, Cast (spun) Iron, Pipes (class La)., C.i. Sluice Valves, & Reflex Valves, Stainless Steel, Pipes & Fittings, Ductile Iron Pipes, & Fittings, C.i./ D.i. Manhole, Covers & Frames, Water Repellant, Silane Chemical, Aluminium, Sections, Basic/ Toughened, Etc. Glass, Approved, Processors for, Performance, Glass/ Toughened, Glass/, Hermetically, Sealed/ Lacquered, Glass Etc., Plywood/ Veneer, Melamine Polish, Floor Spring, A) Aluminium Section, B) Anodisedaluminium, Hardware (heavy Duty), Ployster Powder Coating, Shades, Clear/ Float/ Frosted/, Refractive/ Coated Glass, Aluminium Composite, Panels, Friction Stay Hinges, Epdm Gasket, Silicon Based Water, Repellant/ Weather Sealant, Eps, Cement Based Wall Putty, 1st Quality Acrylic, Distemper, Washable/ready, Mix/low Voc), Premium Acrylic, Emulsion Paints (interior), Premium Acrylic Smooth, Exterior Paints with, Silicon Additive., Cement Primer, Epoxy Paint, G.i. Fittings, Float Valve, Gun Metal Valves, Globes, Brass Stop & Bib Cock, Non Return Valve (check, Valve)½” to 1¼”, Stainless Steel Sliding, Door Bolts, White Vitreous China, Wall Mounted Type, Water Closet (european, Type W C. Pan), 3/6 Litre Slim Wall, Mounted Concealed, Cistern with Dual Flushing, Cistern, Flushing Plate of with, Flush Pipe, White Vitreous China Flat, Back Half Stall Urinal..
|