Periodical Maintenance to T.e.kalady. <br /> Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead , Of area 3 sq. metres and below , Of area beyond 3 sq. metres , Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 136 (1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. , Door chowkhats . , Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement/resetting of hinges 7 fittings with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. , Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). , In first class countrywood like anjily/plavu, Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note- Butt hinges and necessary screws shall be paid separately) , 35 mm thick shutters in country wood like Anjily/plavu, Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick , In first class countrywood like anjily/plavu, Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. , "In first class countrywood like anjily/plavu, 30 mm thick ", Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete , 250x16 mm , Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc. complete , 125 mm , Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete , 250x10 mm , Repairs to aluminium window by repairs to hinges, locking arrangements by , oiling, cleaning glass etc.. Complete., Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays (I-mex) of approved quality with necessary stainless steel screws etc. windows as per direction of Engineer-in-charge complete. , 205 x 19 mm , Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) , With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) , Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. , 15 mm cement plaster on rough side of single or half brick wall of mix , 14 (1 cement 4 coarse sand) , Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS 7231, with all fittings and fixtures complete. , 10 litre capacity - White , Providing & fixing Cover with loccking arrangements for PVC water tanks upto 1000 Ltr.capacity., Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete , Black solid plastic seat with lid , Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) , Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. , "Flexible pipe , 32 mm dia ", Providing and fixing uplasticised PVC connection pipe with brass unions , "45 cm length , 15 mm nominal bore ", Providing and fixing PTMT bib cock of approved quality and colour. , 15 mm nominal bore, 122 mm long. Weighing not less than 99 gms. , Providing and fixing PTMT pillar cock of approved quality and colour . , 15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms. , Providing and fixing PTMT stop cock of approved quality and colour. , 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. , Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing , Rectangular shape 453x357 mm , Cleaning openwell in the compound (3.0 mtr dia)incuding removing vegetation, mud, silt , clening sidewalls etc.. Complete.The work includes bailing out water & all other incidental charges complete., Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface , Water thinnable cement primer. , White washing with lime to give an even shade , Old work (one or more coats) . , Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade , One or more coats on old work. , Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. , Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade , One or more coats on old work. , Two or more coats on new work. , Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade , Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. , Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. , Cement mortar 14 (1 cement 4 coarse sand) , Supplying & fixing LED tubesets (20w) of approved brand & manufacture .(PHILIPS) or equivalent) including removal of old fittings., Cleaning the external wall/sunshades with pressure wash including necessary repairs to cracks etc.. Complete.
Periodical Maintenance to T.e.kalady.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead , Of area 3 sq. metres and below , Of area beyond 3 sq. metres , Fixing chowkhats in
Bleaching Powder Tenders, Brick Tenders, Cement Tenders, Civil Work Tenders, Cleaning Work Tenders, Desilting Tenders, Flooring Tenders, G I Pipe Tenders, Garbage Disposal Tenders, Glass Tenders, Horticulture Work Tenders, Light and Bulb Tenders, M S Pipe Tenders, Paint Tenders, Painting Work Tenders, Pipe- Plastic Tenders, Pipes / Fittings Tenders, plastic tank Tenders, Plumbing And Sanitary Work Tenders, Sand Tenders, Sanitary Items Tenders, Taps And Dies Tenders, Wall Tenders