6.
Biz value: INR 1.86 Cr
Bid Before:27 March 2023 Closing today
Dakshinanchal Vidyut Vitran Nigam Limited
Supply of electrical materials - ST pole, PCC pole, stone pad, top channel, dropper channel, V type steel cross arm with clamp, 11 kv pin insulator with pin complete, 11 kv disc insulator with fitting, LT clamp with nut & bolts for pcc pole, MS angle, MS T- off channel with clamp, f-bracket for fitting top channel, holding clamp with bolt nut, danper board with clamp, stay complete, earthing complete, distribution box with clamp, ABC, end clamp, eve hook with suspension clamp, LT insulator with pearsing, bolt, nut & washers 400 kva transformer etc.
Tag a friend Hashtag & Get Tender Probable Participants
7.
Biz value: INR 1.36 Cr
Bid Before:27 March 2023 Closing today
Research And Development Centre
supply of slotted 100 csk head, 100csk offset cruciform head, cheese head, hex socket head, hex head, grub screw, nut, anchor nut, m6 stud, m8 stud, m10 stud m, ins m10 stud rear, nca m8 stud, m12 stud, bolt, washers, plain washer, spring washer, offset cruciform bits - fabrication supply of externally internally threaded fasteners en24 steel esr grade Qty 158795
Tag a friend Hashtag & Get Tender Probable Participants
8.
Biz value: INR 1.20 Cr
Bid Before:27 March 2023 Closing today
Dakshinanchal Vidyut Vitran Nigam Limited
Supply of electrical materials - STP pole, PCC pole, stone pad, top channel, dropper channel, V type steel cross arm with clamp, 11 kv pin insulator with pin complete, 11 kv disc insulator with fitting, LT clamp with nut & bolts for pcc pole, MS angle, MS T- off channel with clamp, f-bracket for fitting top channel, holding clamp with bolt nut, danper board with clamp, stay complete, earthing complete, distribution box with clamp, ABC, end clamp, eve hook with suspension clamp, LT insulator with pearsing, bolt, nut & washers 400 kva transformer etc.
Tag a friend Hashtag & Get Tender Probable Participants
9.
Biz value: INR 1.18 Cr
Bid Before:27 March 2023 Closing today
Airports Authority Of India
Supply installation testing commissioning of dust, damp and vermin proof cubicle free floor, indoor type factory built sheet steel enclosed modular bolted construction, suitable for operation on 415 10% volts, 50 hz ac 3 phase 4 wire supply system fabricated out of crca sheet steel of 2.0 mm thick for frame work and 2.0 mm thick for doors/ covers, 3mm thick for gland plate including cleaning & finishing complete with 7 tank process for powder coating in approved shade, having tpn al. bus bars of high conductivity, dmc/smc bus bar supports, bottom base channel of section not less than ismc 75mm, entire panel shall have a common cu earth bar of suitable size with 2 nos earth studs, i/c control wiring with 1.5sqmm. pvc insulated frls copper conductor single core cable for voltage & 2.5sq.mm for current ckt, cable alleys, cable gland plates ,danger notice plates, etc. necessary metering protections & indications and mounted with the following switch gears., note provision for installation of external 3 phase spd to be provided in the panel (supply and installation of 3 phase spd is not covered in this item. i/c i) 2 no. 100 a 4p , mccb 36ka, ics is equal to icu is equal to 36 ka with thermal magnetic release having overload & short circuit protection equipped with extendable rotary handle and extendable terminals with the following a) 6 nos phase indication led lamps with 2amp mcb, on/off indicating light with 2a mcb mfm, class 0.5 with lcd display shown v,a,hz & pf - 2 nos. ats i) 1 no. 4 pole, 100 a ats bus-bar, tpn al. main bus bars of min 120 a capacity with heat shrinkable coloured sleeves & i/c dmc/smc bus bars supports at required intervals complete. o/g i) 3 no 63 a 4p, mccb 25ka, (ics is equal to icu is equal to 25 ka) with thermal magnetic release having o/l & short ckt protection equipped with extendable rotary handle with the following ii) 2 no 32 a tpn, mcb 10ka (iii) 2 no 16 a sp, mcb 10ka 4 set of on off indication lamps (led type) with 2 a control mcbs.", supply of 3.5 core x 300 sqmm xlpe insulated pvc sheathed armoured aluminium conductor cable of 1.1 kv grade confirming to is 7098 (part 1) with upto date amendment etc. complete as required., supply of aesthetically designed rechargeable led lantern with dimming & sos feature with minimum 5 watt, rechargeable li-ion battery capacity of 3.7 v, 4400 mah and suitable charging from 160-270v ac supply 50hz etc as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size above 185 sqmm and upto 400 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size above 185 sq. mm and upto 400 sq. mm in the existing masonry open duct as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm ms flat clamp) on wall surface as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size above 185 sq. mm and upto 400 sq. mm in the existing rcc/ hume/ metal pipe as required., supply and installation of floor mounting, totalling enclosed, compartmentalized, cubical, dust, vermin proof and outdoor type joint box for 300 sq.mm. armoured cable, ip-65 fabricated out of 2 mm thick cold rolled carbon annealed, sheet steel. comprising of 125 a al bus bar. height shall be 1.5 mtr enclosure size 500 mm x 500 mm x 250 mm powder coated ral-7035., supplying and making end termination with brass compression gland and aluminium lugs for size of 3.5 x 300 sq.mm. pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required., earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required., providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re-filling etc. as required., supplying and laying 25 mm x 5 mm g.i strip at 0.50 metre below ground in 40 mm b class gi pipe , including connection/ terminating with g.i. nut, bolt, spring, washer etc. as required. (jointing shall be done by overlapping and with 2 sets of g.i. nut bolt & spring washer spaced at 50mm)., providing & fixing of 25mm x 5mm gi strip on surface or recess for earth connection as required., providing, laying and fixing of 80 mm dia g.i. pipe (medium class) in ground complete with g.i. fittings including trenching (75 cm deep) and re-filling etc. as required, "supply and installation of pre-wired primary protection (class b/type 2) surge protection device (spd) having 100ka , 10/350 micro seconds neutral to earth, 50 ka...
Tag a friend Hashtag & Get Tender Probable Participants
10.
Biz value: INR 1.15 Cr
Bid Before:06 April 2023 10 Days to go
Gujarat State Road Transport Corporation
supply of blade assy bolt type - gsrtc code no 46022, heavy duty ele operated wiper assy duel type - gsrtc code no 46027, wiper system - butterfly wiping system from button - gsrtc code no 46031, butterfly wiper arms rh- driver side - 750 mm - gsrtc code no 46054, direct mount type 75 wiper assly with accessories - gsrtc code no46nc, wiper arm for air operated pneumatic wiper assy - gsrtc code no 46008, wiper blade for air operated pneumatic wiper assy - gsrtc code no 46009, wiper arm lh rh - gsrtc code no 46023, wiper arm lh rh - gsrtc code no 46024, wiper arm lh rh - gsrtc code no 46025, blade assy bolt type - gsrtc code no 46026, wiper blade size 700 mm air operated pneumatic wiper assembly - gsrtc code no 46028, wiper arm size 700 mm air operated pneumatic wiper assembly - gsrtc code no 46029, m s round pipe for wiper - gsrtc code no 46030, butterfly wiper blade - gsrtc code no 46032, wiper arm rh length 28inch - gsrtc code no 46041, wiper arm lh length 28inch - gsrtc code no 46042, electric wiper motor 12v suitable for eicher mini bus - gsrtc code no 46043, only wiper linkage without bracket suitable for eicher mini bus - gsrtc code no 46044, wiper blade assy suitable for eicher - gsrtc code no 46045, wiper arm assy rh suitable for eicher - gsrtc code no 46046, only wiper link assy without bracket suitable for eicher - gsrtc code no 46047, electric wiper motor 12v suitable for tata mini bus - gsrtc code no 46048, wiper arm assy driver suitable for tata mini bus - gsrtc code no 46049, wiper arm assy co-driver suitable for tata mini bus - gsrtc code no 46050, wiper linkage assy suitable for tata mini bus - gsrtc code no 46051, twin pantograph wiper arm - gsrtc code no 46052, twin pantograph wiper arm - gsrtc code no 46053, butterfly wiper arms lh - gsrtc code no 46055, wiper arm for electric operated assy - gsrtc code no 46nc1, wiper blade for electric operated assy - gsrtc code no 46nc2 - wiper assy its parts sch 46 Qty 14107
Tag a friend Hashtag & Get Tender Probable Participants
