1.
Biz value: INR 1.18 Cr
Bid Before:27 March 2023 7 Days to go
Airports Authority Of India
Supply installation testing commissioning of dust, damp and vermin proof cubicle free floor, indoor type factory built sheet steel enclosed modular bolted construction, suitable for operation on 415 10% volts, 50 hz ac 3 phase 4 wire supply system fabricated out of crca sheet steel of 2.0 mm thick for frame work and 2.0 mm thick for doors/ covers, 3mm thick for gland plate including cleaning & finishing complete with 7 tank process for powder coating in approved shade, having tpn al. bus bars of high conductivity, dmc/smc bus bar supports, bottom base channel of section not less than ismc 75mm, entire panel shall have a common cu earth bar of suitable size with 2 nos earth studs, i/c control wiring with 1.5sqmm. pvc insulated frls copper conductor single core cable for voltage & 2.5sq.mm for current ckt, cable alleys, cable gland plates ,danger notice plates, etc. necessary metering protections & indications and mounted with the following switch gears., note provision for installation of external 3 phase spd to be provided in the panel (supply and installation of 3 phase spd is not covered in this item. i/c i) 2 no. 100 a 4p , mccb 36ka, ics is equal to icu is equal to 36 ka with thermal magnetic release having overload & short circuit protection equipped with extendable rotary handle and extendable terminals with the following a) 6 nos phase indication led lamps with 2amp mcb, on/off indicating light with 2a mcb mfm, class 0.5 with lcd display shown v,a,hz & pf - 2 nos. ats i) 1 no. 4 pole, 100 a ats bus-bar, tpn al. main bus bars of min 120 a capacity with heat shrinkable coloured sleeves & i/c dmc/smc bus bars supports at required intervals complete. o/g i) 3 no 63 a 4p, mccb 25ka, (ics is equal to icu is equal to 25 ka) with thermal magnetic release having o/l & short ckt protection equipped with extendable rotary handle with the following ii) 2 no 32 a tpn, mcb 10ka (iii) 2 no 16 a sp, mcb 10ka 4 set of on off indication lamps (led type) with 2 a control mcbs.", supply of 3.5 core x 300 sqmm xlpe insulated pvc sheathed armoured aluminium conductor cable of 1.1 kv grade confirming to is 7098 (part 1) with upto date amendment etc. complete as required., supply of aesthetically designed rechargeable led lantern with dimming & sos feature with minimum 5 watt, rechargeable li-ion battery capacity of 3.7 v, 4400 mah and suitable charging from 160-270v ac supply 50hz etc as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size above 185 sqmm and upto 400 sqmm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size above 185 sq. mm and upto 400 sq. mm in the existing masonry open duct as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm ms flat clamp) on wall surface as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size above 185 sq. mm and upto 400 sq. mm in the existing rcc/ hume/ metal pipe as required., supply and installation of floor mounting, totalling enclosed, compartmentalized, cubical, dust, vermin proof and outdoor type joint box for 300 sq.mm. armoured cable, ip-65 fabricated out of 2 mm thick cold rolled carbon annealed, sheet steel. comprising of 125 a al bus bar. height shall be 1.5 mtr enclosure size 500 mm x 500 mm x 250 mm powder coated ral-7035., supplying and making end termination with brass compression gland and aluminium lugs for size of 3.5 x 300 sq.mm. pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required., earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required., providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re-filling etc. as required., supplying and laying 25 mm x 5 mm g.i strip at 0.50 metre below ground in 40 mm b class gi pipe , including connection/ terminating with g.i. nut, bolt, spring, washer etc. as required. (jointing shall be done by overlapping and with 2 sets of g.i. nut bolt & spring washer spaced at 50mm)., providing & fixing of 25mm x 5mm gi strip on surface or recess for earth connection as required., providing, laying and fixing of 80 mm dia g.i. pipe (medium class) in ground complete with g.i. fittings including trenching (75 cm deep) and re-filling etc. as required, "supply and installation of pre-wired primary protection (class b/type 2) surge protection device (spd) having 100ka , 10/350 micro seconds neutral to earth, 50 ka...
Tag a friend Hashtag & Get Tender Probable Participants
2.
Biz value: INR 72 Lac
Bid Before:24 March 2023 4 Days to go
National Aluminium Company Limited
Supply of hp sw pump assy, lp sw pump assy, fw pump assy, dwo pump assy, dwi pump assy, oil level indicator, spring, lock nut, expeller, wear plate, inner casing, impeller, wear plates side, shaft sleeve, Qty 75
Tag a friend Hashtag & Get Tender Probable Participants
3.
Biz value: INR 70.45 Lac
Bid Before:20 March 2023 Closing today
South Eastern Coalfields Limited
Supply of shaft sleeve part no 2100125150cst, shaft bush part no 1102, check nut pump part no 30103020, upper lower casing part no 10011002, gl set made of brass part no 2310125150cst, neck ring part no 56cst1181, bearing housing coupling end part no 2761, cowl nut part no 30313032, water thrower part no 2070, rotating unit part no rot001dme810, shaft bushing part no2100, neck ring part no 1181, bearing lock nut part no 3010dme810, gl split part no 2310dme810, stuffing box bush part no 2402dme810, cooling pipe flexible socket part no cpfs01, rotating unit complete set part no rot001, impeller part no 1012d101, shaft bushing part no 2100, neck part no 1181, sleeve nut part no 30313032, bearing housing part no 1012d113, gland, brass part no2310, logging ring part no 1012dme006, water thrower part no 1012d107, fastners part no fas01, stuffing box part no 1012d105, rotating unit complete part no rot01 - rotating unit complete part no rot01 Qty 77
Tag a friend Hashtag & Get Tender Probable Participants
4.
Biz value: INR 50 Lac
Bid Before:27 March 2023 7 Days to go
Rajasthan State Road Transport Corporation
Supply Of Gear Parts Eicher C.W. & Pinion Set, Gear Lever End, Gear Lever Bush, Syn. Sleeve, Clutch Body Ring, 2nd & 3rd Syn. Spg., Syn. Ring, 4th & 5th Syn. Hub, Ball Terra 25, 3rd Gear Main Shaft, Case Cover Upper, Poppet Terra, 2nd/ 3rd Syn. Ring, Fork Gear Shift 4th & 5th, Rail 4th & 5th Gear Shift, Fork 4th/5th Syn. Dia 90, Counter Shaft, Ball Joint Gear Shift Cable, Syn. Sleeve 4th Gear, Gear Assy, Main Shaft 4th, Gear Counter Shaft Cluster, Main Shaft, Knob Charger Lever, 2nd – 3rd Hub Syn., Hub 4th & O/D Syn., Ring Syn., Syn. Ring, Lever Gear Shifting Sliding 10.75, Spring Puppet, Ball Steel 13/32, Ring Syn. (2nd & 3rd), Shifting Fork 4th Od, Key Shifting, Spring Shifting Key 2nd/3rd, Spring Shifting Key 4th Od, Shifting Patti Assly, Flange Companion, Thrust Washer, Main Shaft Nut, 3rd Gear Main Shaft, 2nd Gear Main Shaft, 1st Gear Main Shaft, Reverse Gear Main Shaft, Spider Eicher 10.75, Lock Ring Pinion, Thrust Washer Big, Thrust Washer Small, Star Gear Small, Pinion Drive Assly., Cross Shaft 20.15, Sliding Dog 4th & 5th 20.15, Case Cover Upper 20.15, Bush Cross Shaft 20.15, Spring Pin Assly. 20.15, Adjustable Rod 20.15, Syn. Hub 4th/5th 20.15, 4th Gear Ms 20.15, Plug Bolt 20.15, Drive Pinion 20.15, 2nd Gear Ms 45 Teeth 20.15, Thrust Washer 1st Gear 10.75, Pin Split 4x35 10.75, Gear Box Snap Ring Kit 10.75, Outer Lever Shifting Quarter Pin, 10.75, Gear Cable 20.15, Lever Gs Upper (sgsl) 10.75, Dust Plug 10.75, Lever Cross Shaft 20.15, Sleeve 4th Gear 20.15, Syncro Assy 3rd 4th 20.15, Spring Return 10.75, Pin Spring 10.75, Upper Cover 10.75, Single Rod(Cross Rod Cover)10.75, Sun Gear 10.75, Sleeve Synchro 4th And 5th 10.75, C.W. Pinion Assy 20.15, Gear Differential, Shifting Fork .
Tag a friend Hashtag & Get Tender Probable Participants
5.
Biz value: INR 44.57 Lac
Bid Before:21 March 2023 1 Day to go
Mahanadi Coalfields Limited
supply of upper and lower casing, moc ci, for beacon weir sdd 250by350 pump, head - 120mtr, discharge - 180lps, part no 18, as per specification, rotating assembly complete, moc bronze, for beacon weir sdd 250by350 pump, head - 120mtr, discharge - 180lps, part no 17, as per specification, impellor, moc ci, for beacon weir sdd 250by350 pump, head - 120mtr, discharge - 180lps, part no sdd25035002, as per specification, shaft with sleeve nut and impeller key-e, moc shaft - en 19, sleeve - bronze, for beacon weir sdd 250by350 pump, head - 120mtr, discharge - 180lps, part no 05, as per specification, shaft sleeve, moc bronze, for beacon weir sdd 250by350 pump, head - 120mtr, discharge - 180lps, part no sdd250350009, as per specification, lantern ring, moc bronze, for beacon weir sdd 250by350 pump, head - 120mtr, discharge - 180lps, part no sdd250350018, as per specification, bearing housing de, moc ci, for beacon weir sdd 250by350 pump, head - 120mtr, discharge - 180lps, part no sdd250350002, as per specification, bearing housing nde, moc ci, for beacon weir sdd 250by350 pump, head - 120mtr, discharge - 180lps, part no sdd250350003, as per specification, gland, moc ci, for beacon weir sdd 250by350 pump, head - 120mtr, discharge - 180lps, part no sdd250350005, as per specification, water thrower, moc ci, for beacon weir sdd 250by350 pump, head - 120mtr, discharge - 180lps, part no sdd250350006, as per specification, casing wear ring, moc bronze, for beacon weir sdd 250by350 pump, head - 120mtr, discharge - 180lps, part no sdd25035006, as per specification - spares for beacon weir sdd 250by350 model pump head 120mtr discharge 180lps Qty 95
Tag a friend Hashtag & Get Tender Probable Participants
7.
Biz value: INR 23.21 Lac
Bid Before:20 March 2023 Closing today
Damodar Valley Corporation
Supply of packing shaft viton pt pfor 5 5 asseal drg no 2h 30539, ring o viton pt 6 spares for 5 500 hs seal drg no 2h 30539 for bfp fk6d30 ring drg no 2h30539 for bfp fk6d30 o viton pt 6 spares for 5 500 hs seal, insert tc sic silicon carbide sp for epil mechanical seal type hp1 speeol for bfp fk6d30, packing sleeve viton for 5 500 hs seal drg no 2h 30539 for bfp, collar sleeve ss316 lh rh thread for 5 500 hs seal drg no 2h30539 for bfp, ring seal-5 carbon pt no 03, insert carbon sp for 4 250 p70 seal as per drg no 24 33690 for booster pump, gasket gfd ptg sp for pto seal asper drg no 2h 33690r2 for wrir booster pump daib 56, spring alloy 20 for 4 250 pto seal, ring o viton pt 6 spares for 4 250 pto seal drg no 2h 33690r2 for weir booster pump faib56, packing shaft viton pt p for 4 25 pto seal drg no 2h 33690r2, packing sleeve viton pt no 11 for 4 25 pto seal drg no 2h33690 r2 for booster pump, ring seal tuncar 62 6 pt 3, insert part no 2 drg no 2h 97621, insert mounting part no 6 drg no 2h 97621, set screw part no 13 drg no 2h 97621 - procurement of different spares of mechanical seal if bfp Qty 222
Tag a friend Hashtag & Get Tender Probable Participants
8.
Biz value: INR 21.92 Lac
Bid Before:21 March 2023 1 Day to go
Uranium Corporation Of India Limited
Supply of a- spares for ball mill 2bm-1c, make- mc nally sayaji engineering limited, size-3 2 mtr x 5 0 mtr, equipment sl no-2007-i-10, ref- so 2007065 feed sleeve, b- spares for ball mill 2bm-1c, make- mc nally sayaji engineering limited, size-3 2 mtr x 5 0 mtr, equipment sl no-2007-i-10, ref- so 2007065 fab discharge sleeve, c- spares for ball mill 2bm- 1c, make- mc nally sayaji engineering limited, size-3 2 mtr x 5 0 mtr, equipment sl no-2007-i-10, ref- so 2007065 neoprene wedge ring, d- spares for ball mill 2bm-1c, make- mc nally sayaji engineering limited, size-3 2 mtr x 5 0 mtr, equipment sl no-2007-i-10, ref- so 2007065 extension spring, e- spares for ball mill 2bm-1c, make- mc nally sayaji engineering limited, size-3 2 mtr x 5 0 mtr, equipment sl no-2007-i-10, ref- so 2007065 hi-lift hose assembly, f- spares for ball mill 2bm-1c, make- mc nally sayaji engineering limited, size-3 2 mtr x 5 0 mtr, equipment sl no-2007-i-10, ref- so 2007065 25mm square gl metallic packing teflon - spares for ball mill Qty 26
Tag a friend Hashtag & Get Tender Probable Participants
